Operating Instruction Video Camera HDC-SD1PP
Table Of Contents
- TABLE OF CONTENTS
- QUICK GUIDE
- BEFORE USING
- SETUP
- RECORDING
- PLAYBACK
- EDITING
- CARD MANAGEMENT
- WITH OTHER PRODUCTS
- WITH A COMPUTER
- OTHERS
- MENUS AND INDICATIONS
- FUNCTIONS THAT CANNOT BE USED SIMULTANEOUSLY
- TROUBLESHOOTING
- CAUTIONS FOR USE
- EXPLANATION OF TERMS
- SPECIFICATIONS
- OPTIONAL ACCESSORIES
- ACCESSORY ORDER FORM (FOR USA CUSTOMERS)
- REQUEST FOR SERVICE NOTICE (USA ONLY)
- LIMITED WARRANTY (FOR USA CUSTOMERS)
- CUSTOMER SERVICES DIRECTORY
- WARRANTY (FOR CANADIAN CUSTOMERS)
- INDEX
- SPANISH QUICK USE GUIDE/GUIA ESPANOLA PARA EL USO RAPIDO
With other products
86
VQT1A24
1 Connect this unit and a TV with the AV cable (supplied).
A AV cable (supplied)
2 Set the mode dial to to turn on the power.
3 Change the input channel on the TV.
Example: Select the [Video 2] channel etc.
(The name of the channel may differ depending on the connected terminal.)
4 Start playback on this unit.
The image and audio are output on the TV.
ª If the image or audio from this unit is not output on the TV
≥Check that the plugs are inserted as far as they go.
≥Check the connected terminal.
≥Check the TV’s input setting (input switch). (For more information, please read the operating
instructions for the TV.)
≥When a HDMI cable is connected at the same time, priority is given to the output from the HDMI
cable.
≥When the component cable is connected at the same time, priority is given to the component cable for
image output.
≥If the images are not displayed correctly on a wide-screen TV, adjust the aspect setting on the TV.
(Refer to the operating instructions of the TV for details.) If the pictures are displayed squeezed
horizontally on a regular TV (4:3), change the setting on this unit. (l 80)
4 Connecting with the AV cable (supplied)
A
VIDEO IN
AUDIO IN
VQT1A24_ENG_PP.book 86 ページ ２００７年１月２１日 日曜日 午後１時１７分