HDCSD10_TM10_TM15P-VQT2H52_eng.book 1 ページ ２００９年７月６日 月曜日 午後１時４６分 Operating Instructions High Definition Video Camera Model No. HDC-SD10PP HDC-TM10PP HDC-TM15P Before connecting, operating or adjusting this product, please read the instructions completely. Spanish Quick Use Guide is included. Guía para rápida consulta en español está incluida. For USA and Puerto Rico assistance, please call: 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 2 ページ ２００９年７月６日 月曜日 午後１時４６分 Things You Should Know Date of Purchase Thank you for choosing Panasonic! You have purchased one of the most sophisticated and reliable products on the market today. Used properly, we’re sure it will bring you and your family years of enjoyment. Please take time to fill in the information on the right. The serial number is on the tag located on the back of your camera.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 3 ページ ２００９年７月６日 月曜日 午後１時４６分 THE FOLLOWING APPLIES ONLY IN THE U.S.A. FCC Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 4 ページ ２００９年７月６日 月曜日 午後１時４６分 Battery pack (Lithium ion battery pack) ≥ Use the specified unit to recharge the battery pack. ≥ Do not use the battery pack with equipment other than the specified unit. ≥ Do not get dirt, sand, liquids, or other foreign matter on the terminals. ≥ Do not touch the plug terminals (i and j) with metal objects. ≥ Do not disassemble, remodel, heat or throw into fire.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 5 ページ ２００９年７月６日 月曜日 午後１時４６分 IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference. 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 6 ページ ２００９年７月６日 月曜日 午後１時４６分 Precautions USE & LOCATION WARNING ≥ TO AVOID SHOCK HAZARD ... Your camera and power supply should not be exposed to rain or moisture. Do not connect the power supply or operate your camera if it gets wet. Your camera has been designed for outdoor use, however it is not designed to sustain direct exposure to water, rain, sleet, snow, sand, dust, or a direct splashing from a pool or even a cup of coffee.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 7 ページ ２００９年７月６日 however, parts of the explanation refer to different models. ≥ Depending on the model, some functions are not available. ≥ Features may vary, so please read carefully. ∫ Cards that you can use with this unit SD Memory Card and SDHC Memory Card ≥ 4 GB (or more) Memory Cards that do not have the SDHC logo are not based on SD Memory Card Specifications. ≥ Refer to page 24 for more details on SD cards.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 8 ページ ２００９年７月６日 月曜日 午後１時４６分 Contents Accessories.................................................. 10 Features........................................................ 11 Quick Guide.................................................. 12 Preparation Before using [1] Handling of Built-in Memory [HDC-TM10/HDC-TM15]..................... 15 [2] Parts identification and handling ..... 16 Setup [1] Power supply ..................................... Charging the battery .....
HDCSD10_TM10_TM15P-VQT2H52_eng.book 9 ページ ２００９年７月６日 月曜日 Playback With a PC Before using With a TV [1] Watching Video/Pictures on your TV ............................................... 90 Connecting with a HDMI mini cable..... 93 Connecting with the component cable... 93 [2] Playback using VIERA Link™ (HDAVI Control™)............................... 94 Backup With other products [1] Connecting a DVD burner to copy to/ play back a disc .................................
HDCSD10_TM10_TM15P-VQT2H52_eng.book 10 ページ Accessories Check the accessories before using this unit. Battery pack VW-VBG070 AC adaptor VSK0697 AC cable K2CA2CA00025 DC cable K2GJ2DC00022 AV cable K2KYYYY00054 or K2KC4CB00027 Component cable K1HY10YY0005 or K1HY10YY0009 USB cable K1HY04YY0032 Stylus pen VFC4394 CD-ROM Software Product numbers correct as of July 2009. These may be subject to change.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 11 ページ ２００９年７月６日 月曜日 午後１時４６分 Features ∫ Very clear high definition pictures This unit can record detailed high definition images. High definition images (1920k1080)* A Number of available scan lines 1080 * If the recording mode is HA/HG/HX. Standard images (720k480) B Number of available scan lines 480 What is AVCHD? This is a format for recording and playing back highly detailed high definition images. Images are recorded based on the MPEG-4 AVC/H.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 12 ページ ２００９年７月６日 月曜日 午後１時４６分 Quick Guide ∫ Charging the battery Charging lamp [CHARGE] A Lights up: Charging Goes off: Charging completed 1 Connect the AC cable to the AC adaptor and the AC outlet. 2 Insert the battery into the AC adaptor by aligning the arrows. ∫ Inserting the battery Open the LCD monitor and install the battery by inserting it in the direction shown in the figure. A Insert the battery until it clicks and locks.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 13 ページ ２００９年７月６日 月曜日 午後１時４６分 ∫ Selecting a mode ∫ Recording motion pictures Operate the mode switch to change the mode to or . 1) Change the mode to . 2) Open the LCD monitor. ≥ For users who have , proceed to step 4. 3) / Press the MENU button, then touch [MEDIA SELECT] # [Built-in Memory] or [SD CARD]. 4) Press the recording start/stop button to start recording.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 14 ページ ２００９年７月６日 月曜日 午後１時４６分 ∫ Motion picture playback ∫ Still picture playback 1) Change the mode to . 2) Touch the play mode select icon A to select desired media to be played back. 1) Change the mode to . 2) Touch the play mode select icon A to select desired media to be played back. ≥ Touch [VIDEO/SD CARD] to play back the SD card. / Touch [VIDEO/Built-in Memory] to play back the built-in memory. 3) Touch the scene to be played back.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 15 ページ ２００９年７月６日 月曜日 午後１時４６分 Preparation Before using 1 Handling of Built-in Memory [HDC-TM10/HDC-TM15] : This unit is equipped with the built-in 8 GB memory. When using this component, pay attention to the following points. : This unit is equipped with the built-in 16 GB memory. When using this component, pay attention to the following points.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 16 ページ ２００９年７月６日 月曜日 午後１時４６分 Preparation Before using 2 Parts identification and handling 1 23 45 6 7 8 9 18 17 161514 10 11 1 LCD monitor (Touch screen) (l 28, 36) ≥ It can open up to 90o. ≥ It can rotate up to 180o A towards the lens or 90o B towards the opposite direction. Due to limitations in LCD production technology, there may be some tiny bright or dark spots on the LCD monitor screen.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 17 ページ ２００９年７月６日 月曜日 午後１時４６分 20 21 22 23 24 19 19 Lens cover 20 Lens cover opening/closing switch When not using the unit, close the lens cover to protect the lens. 21 22 23 24 Lens Built-in flash (l 63) Video light (l 52) Recording lamp (l 31) ≥ Slide the opening/closing switch to open/close the cover.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 18 ページ ２００９年７月６日 月曜日 午後１時４６分 35 Grip belt 36 1 Adjust the length to fit your hand. 2 Pull to adjust the length. When carrying the unit with your hand down (l 38) 36 Tripod receptacle This is a hole for attaching the unit to the optional tripod. (For details on mounting the tripod, refer to the operating instructions for the tripod.) Pass your hand through the strap part.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 19 ページ ２００９年７月６日 月曜日 午後１時４６分 Preparation Setup 1 Power supply ∫ About batteries that you can use with this unit The battery that can be used with this unit is VW-VBG070/VW-VBG130/VW-VBG260/VW-VBG6. ≥ This unit has a function to distinguish the batteries that can be used, and the batteries (VW-VBG070/VW-VBG130/VW-VBG260/VW-VBG6) are compatible with this function. (The batteries that are not compatible to this function cannot be used.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 20 ページ ２００９年７月６日 月曜日 午後１時４６分 ≥ We recommend using Panasonic batteries (l 10, 21, 140). ≥ If you use other batteries, we cannot guarantee the quality of this product. ≥ Do not heat or expose to flame. ≥ Do not leave the battery(ies) in an automobile exposed to direct sunlight for a long period of time with doors and windows closed. Inserting/removing the battery Open the LCD monitor and install the battery by inserting it in the direction shown in the figure.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 21 ページ ２００９年７月６日 月曜日 午後１時４６分 Charging and recording time ∫ Charging/Recording time ≥ Temperature: 25 oC (77 oF)/humidity: 60% HDC-SD10 Battery model number [Voltage/Capacity (minimum)] Charging time Maximum continuously recordable time Actual recordable time Supplied battery/ VW-VBG070 (optional) [7.2 V/725 mAh] 1 h 35 min 1 h 20 min 50 min VW-VBG130 (optional) [7.2 V/1250 mAh] 2 h 35 min 2 h 15 min 1 h 25 min VW-VBG260 (optional)* [7.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 22 ページ ２００９年７月６日 月曜日 午後１時４６分 Battery capacity indication ≥ The display changes as the battery capacity reduces. # # # # If there is less than 3 minutes remaining, then will become red. If the battery discharges, then ( ) will flash. ≥ The remaining battery capacity is displayed when using the Panasonic battery that you can use for this unit. It may take time to display the remaining battery capacity. The actual time can vary depending on your actual use.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 23 ページ ２００９年７月６日 月曜日 午後１時４６分 Connecting to the AC outlet Important: While the DC cable is connected to the AC adaptor, the battery will not charge. ≥ Do not use the AC cable with any other equipment as it is designed only for this unit. Also, do not use the AC cable from other equipment with this unit. A DC output terminal 1 Connect the AC cable to the AC adaptor and the AC outlet. 2 Connect the DC cable to the AC adaptor. 3 Insert the DC cable.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 24 ページ ２００９年７月６日 月曜日 午後１時４６分 Preparation Setup 2 Preparation of SD cards This unit (an SDHC compatible device) is compatible with both SD Memory Cards and SDHC Memory Cards. When using an SDHC Memory Card on another device, confirm that the device supports the SDHC Memory Card. Cards that you can use with this unit Use SD cards conforming to Class 4 or higher of the SD Speed Class Rating* for motion picture recording.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 25 ページ ２００９年７月６日 月曜日 午後１時４６分 Inserting/removing an SD card When using an SD card not from Panasonic, or one previously used on other equipment, for the first time on this unit, format the SD card. (l 89) When the SD card is formatted, all of the recorded data is deleted. Once the data is deleted, it cannot be restored. Copy valuable data onto a PC, DVD disc etc. before proceeding with the formatting.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 26 ページ ２００９年７月６日 月曜日 午後１時４６分 Preparation Setup 3 Turning the unit on/off You can turn the power on and off using the power button or by opening and closing the LCD monitor. Turning the power on and off with the power button Press the power button to turn on the power. To turn off the power Hold down the power button until the status indicator goes off. A The status indicator lights.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 27 ページ ２００９年７月６日 月曜日 午後１時４６分 Preparation Setup 4 Selecting a mode Change the mode to recording or playback. Operate the mode switch to change the mode to or .
HDCSD10_TM10_TM15P-VQT2H52_eng.book 28 ページ ２００９年７月６日 月曜日 午後１時４６分 Preparation Setup 5 How to use the touch screen You can operate by directly touching the LCD monitor (touch screen) with your finger. It is easier to use the stylus pen (supplied) for detailed operation or if it is hard to operate with your fingers. ∫ Touch ∫ About the operation icons Touch and release the touch screen to select icon or picture.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 29 ページ ２００９年７月６日 月曜日 午後１時４６分 Preparation Setup 6 Using the menu screen A It is recommended to hold the LCD monitor with your thumb and index finger when pressing the buttons on the LCD monitor. 1 2 3 Press the MENU button. 4 Touch the desired item to enter the setting. 5 Touch [EXIT] or press the MENU button to exit the menu setting. Touch the top menu A. Touch the submenu B. ≥ Next (previous) page can be displayed by touching / .
HDCSD10_TM10_TM15P-VQT2H52_eng.book 30 ページ ２００９年７月６日 月曜日 午後１時４６分 Language selection You can select the language on the screen display and the menu screen. 1 Press the MENU button, then touch [SETUP] # [LANGUAGE]. 2 Touch [English]. Menu list Part of the menu will not be used depending on the used functions. (l 124) Recording mode *1 It is not displayed when the Intelligent auto mode is on. *2 These menus are only for / . *3 / When the [MEDIA SELECT] is set to [SD CARD].
HDCSD10_TM10_TM15P-VQT2H52_eng.book 31 ページ PICTURE ２００９年７月６日 月曜日 午後１時４６分 SETUP [QUALITY] (l 47) [HI-SPEED BURST]*1 (l 62) [SELF TIMER] (l 63) [FLASH] (l 63) [FLASH LEVEL]*1 (l 63) [RED EYE]*1 (l 64) [SHTR SOUND] (l 64) MEDIA SELECT*2 When recording to the SD card, select [SD CARD]. When recording to the built-in memory, select [Built-in Memory]. [DISPLAY] The screen indications are selected as shown in the illustration below.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 32 ページ ２００９年７月６日 月曜日 午後１時４６分 [ALERT SOUND] [DEMO MODE] Touch screen operation, starting and stopping of recording and power on/off can be confirmed with this sound. 2 Beeps for 4 times When an error occurs. Check the sentence displayed on the screen. (l 122) This item is used to start the unit demonstration.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 33 ページ ２００９年７月６日 月曜日 午後１時４６分 Playback mode *1 When the disc playback is selected while a DVD burner (optional) is connected, or when [INTEL. SCENE] (l 74) is selected, this does not appear. *2 Only when the disc playback is selected while a DVD burner (optional) is connected, this appears. *3 These menus are only for / . *4 This appears only when the [VIDEO/SD CARD] or [PICTURE/SD CARD] is selected.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 34 ページ ２００９年７月６日 月曜日 午後１時４６分 Preparation Setup 7 Setting date and time When the unit is turned on for the first time, a message asking you to set the date and time will appear. Select [YES] and perform steps 2 to 3 below to set the date and time. ¬ Change the mode to 1 . [DATE] [D/T] Select the menu. (l 29) NOV 15 2009 [SETUP] # [CLOCK SET] # [YES] 12:34PM NOV 15 2009 [OFF] 2 Touch the date or time to be set, then set the desired value using / .
HDCSD10_TM10_TM15P-VQT2H52_eng.book 35 ページ ２００９年７月６日 月曜日 午後１時４６分 World time setting (Displaying the time of the travel destination) It is possible to display and record the time at the travel destination by selecting your home region and the travel destination. 1 Select the menu. (l 29) already been set once, execute the menu operation for Step 1. [SETUP] # [SET WORLD TIME] # [YES] ≥ If the clock is not set, adjust the clock to the current time.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 36 ページ ２００９年７月６日 月曜日 午後１時４６分 Preparation Setup 8 Adjusting LCD monitor ≥ These settings will not affect the images actually recorded. LCD monitor adjustment ∫ Power LCD This makes it easier to view the LCD monitor in bright places including outdoors. Select the menu.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 37 ページ ２００９年７月６日 Touch screen calibration Perform the touch screen calibration if a different object to the one touched is selected. 1 Select the menu. (l 29) 月曜日 午後１時４６分 Recording Yourself ¬ Change the mode to . Rotate the LCD monitor towards the lens side. [SETUP] # [CALIBRATION] # [YES] ≥ Touch [ENTER]. 2 Touch the [_] with the supplied stylus pen and enter in calibration. ≥ The image is horizontally flipped as if you see a mirror image.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 38 ページ ２００９年７月６日 月曜日 午後１時４６分 Recording Recording (Basic) 1 Before recording ∫ Basic camera positioning ≥ When you are outdoors, record pictures with the sunlight behind you. If the subject is backlit, it will become dark in the recording. ≥ When recording, make sure your footing is stable and there is no danger of colliding with another person or object. 1 2 3 4 Hold the unit with both hands. Put your hand through the grip belt. Do not cover the microphones A.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 39 ページ ２００９年７月６日 月曜日 午後１時４６分 Intelligent auto mode The following modes appropriate for the condition are set just by pointing the unit to what you want to record. ≥ When this unit is purchased, the Intelligent auto mode is set to on. Intelligent auto button Press this button to switch on/off the Intelligent auto mode.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 40 ページ ２００９年７月６日 ∫ When Intelligent auto mode is set to off: When the Intelligent auto mode is set to off, the Auto white balance and Auto focus operate and automatically adjust the color balance and focusing. Depending on the brightness of the subject etc., the aperture and shutter speed are automatically adjusted for an optimum brightness. ≥ Color balance and focus may not be adjusted automatically depending on light sources or scenes.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 41 ページ ２００９年７月６日 Quick start This unit will resume recording pause mode about 0.6 seconds after the LCD monitor is reopened. ≥ When in Quick Start Standby mode about 70% of the power used in Recording Pause mode is being consumed, so the recording time will be reduced. ≥ Start time will not shorten if there is no SD card inserted. / Start time will be shorten if the [Built-in Memory] is selected in the [MEDIA SELECT], even if there is no SD card inserted.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 42 ページ ２００９年７月６日 月曜日 午後１時４６分 Recording Recording (Basic) Recording motion pictures 2 This unit records high definition images that are compatible with the AVCHD format. ≥ Use an SD card that can be used for motion picture recording. (l 24) ≥ Open the lens cover before turning on the power. (l 17) / : ∫ When selecting media Select the menu. (l 29) [MEDIA SELECT] # [Built-in Memory] or [SD CARD] 1 Change the mode to 2 Open the LCD monitor. .
HDCSD10_TM10_TM15P-VQT2H52_eng.book 43 ページ ２００９年７月６日 月曜日 午後１時４６分 About the compatibility of the recorded motion pictures ≥ They are not compatible with devices other than those that support AVCHD. Images cannot be played with equipment that does not support AVCHD (ordinary DVD recorders). Confirm that your equipment supports AVCHD by referring to the operating instructions. ≥ There are some cases where the recorded motion pictures cannot be played back, even if the device supports AVCHD.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 44 ページ ２００９年７月６日 月曜日 午後１時４６分 Recording modes/approximate recordable time Switch the picture quality of the motion pictures to be recorded. Select the menu.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 45 ページ ２００９年７月６日 PRE-REC This prevents you from missing a shot. This allows recording of the pictures and sound to start approximately 3 seconds before the recording start/stop button is pressed. 1 Press the PRE-REC button. PRE-REC appears on the screen. ≥ Aim this unit at the subject and position it securely. 2 Press the recording start/stop button to start recording. ≥ There is no beep sound. ≥ After recording starts, the PRE-REC setting is canceled.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 46 ページ ２００９年７月６日 月曜日 午後１時４６分 Recording Recording (Basic) 3 Recording still pictures The number of pixels recorded for still pictures is [ 2.1 M 1920k1080] (16:9). Still pictures can also be recorded while recording motion pictures. ≥ Open the lens cover before turning on the power. (l 17) 1 Change the mode to 2 Open the LCD monitor. ≥ For users who have step 4. 3 . / Select the media to record from the menu. (l 42) Press the button halfway.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 47 ページ ２００９年７月６日 ∫ About the screen indications when the button is pressed 2.1 M R3000 MEGA ß: ßj: : : Flash (l 63) Flash level (l 63) Red eye reduction (l 64) Quality of still pictures 2.1 M : Size of still pictures R3000: Remaining number of still pictures (Flashes in red when [0] appears.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 48 ページ ２００９年７月６日 Simultaneous recording (recording still pictures while recording motion pictures) Picture size 2.1 M (1920t1080) Picture quality . While recording motion pictures, press the button fully (press to the bottom) to take the picture. ≥ While recording motion pictures or during the PRE-REC operation, the following arrangements are applied so that motion picture recording takes preference over still picture recording.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 49 ページ ２００９年７月６日 月曜日 午後１時４６分 Recording Recording (Basic) Zoom in/out function 4 The maximum optical zoom ratio is 16k. ¬ Change the mode to Zoom mode . ヷヰロ ヸ Set the maximum optical zoom ratio. If the zoom magnification exceeds 16k, then the digital zoom function will be activated. ヵ Select the menu.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 50 ページ ２００９年７月６日 月曜日 午後１時４６分 Recording Recording (Basic) 5 Optical image stabilizer function Optical image stabilizer can stabilize the image without decreasing the image quality as much. ¬ Change the mode to . ヰハリハヴハ Optical image stabilizer button Pressing the button changes the optical image stabilizer setting. # # OFF ≥ Set the Intelligent Auto mode to off before setting the Optical Image Stabilizer function to off.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 51 ページ ２００９年７月６日 月曜日 午後１時４６分 Recording Recording (Basic) 6 AF tracking It is possible to set the focus and exposure to the subject specified on the touch screen. The focus and exposure will keep following the subject automatically even if it moves. (Dynamic tracking) ¬ Change the mode to 1 Touch ≥ 2 . . will be displayed on the screen. Touch the object and lock the target.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 52 ページ ２００９年７月６日 月曜日 午後１時４６分 Recording Recording (Basic) 7 Recording with the video light The video light enables brightening of the images taken in a dimly-lit place. ¬ Change the mode to . Video light button Each time the button is pressed, the indication changes by one setting in the following order. # / # Setting canceled : Always on. / : Turns on/off automatically according to brightness of the surroundings. ≥ Lights up when the lens cover is closed.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 53 ページ ２００９年７月６日 月曜日 午後１時４６分 Recording Recording functions of operation icons 1 Recording (Advanced) Select the operation icons to add different effects to the images to be recorded. ¬ Change the mode to 1 . Touch F to display the operation icons on the screen. 2 (e.g. Backlight compensation) Select an operation icon. F F ≥ Touch 1 to change the page and touch F to display/not-display the operation F icon.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 54 ページ Function ２００９年７月６日 月曜日 午後１時４６分 Effect Backlight compensation This makes the image brighter to prevent darkening of a backlit subject. Intelligent contrast control This brightens parts that are in shadow and difficult to see and suppresses white saturation in bright parts at the same time. Both bright and dark parts can be recorded clearly. Fade (Fade in) (Fade out) When you start recording, the image/audio gradually appears.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 55 ページ ２００９年７月６日 月曜日 午後１時４６分 Intelligent contrast control: ≥ If there are extremely dark or bright parts or the brightness is insufficient, the effect may not be clear. Fade: ≥ The thumbnails of scenes recorded using fade in become black (or white). Soft skin mode: ≥ If the background or anything else in the scene has colors similar to the skin color, they will also be smoothed. ≥ If the brightness is insufficient, the effect may not be clear.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 56 ページ ２００９年７月６日 月曜日 午後１時４６分 Recording Recording (Advanced) 2 ¬ Change the mode to Function Scene mode Recording functions of menus . Effect/Setting method When you record images in different situations, this mode automatically sets optimum shutter speeds and apertures. Select the menu.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 57 ページ Function Guide line ２００９年７月６日 月曜日 午後１時４６分 Effect/Setting method You can check if the image is level while recording or playing back motion pictures and still pictures. The function can also be used to estimate the balance of the composition. ≥ The Intelligent auto mode is set to off. (l 39) Select the menu. (l 29) [RECORD SETUP] # [GUIDE LINES] # desired setting When motion picture playback is selected while the mode is set to .
HDCSD10_TM10_TM15P-VQT2H52_eng.book 58 ページ Function / Relay recording ２００９年７月６日 月曜日 午後１時４６分 Effect/Setting method It is possible to continuously record motion picture to an SD card when there is no space available in the built-in memory. Select the menu. (l 29) [RECORD SETUP] # [RELAY REC] # [ON] ≥ is displayed on the screen. will disappear when space in the built-in memory is gone and the recording to the SD card starts. ≥ It allows you to record only to SD card from built-in memory.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 59 ページ Function Auto slow shutter ２００９年７月６日 月曜日 午後１時４６分 Effect/Setting method You can record bright pictures even in dark places by slowing the shutter speed. ≥ The Intelligent auto mode is set to off. (l 39) Select the menu. (l 29) [RECORD SETUP] # [AUTO SLOW SHTR] # [ON] ≥ The shutter speed is set to 1/30 or more depending on the surrounding brightness. Automatic face framing [OFF]: Not display [PRIMARY]: Only the prioritized face framing is displayed.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 60 ページ Function Digital cinema color ２００９年７月６日 月曜日 午後１時４６分 Effect/Setting method Recording motion pictures with more vivid colors, using x.v.Color™ technology. ≥ The Intelligent auto mode is set to off. (l 39) Select the menu. (l 29) [RECORD SETUP] # [Digital Cinema Color] # [ON] ≥ For more realistic colors, use an HDMI mini cable with a TV that supports the x.v.Color™.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 61 ページ ２００９年７月６日 Function Microphone level [AUTO]: AGC is activated, and the recording level is adjusted automatically. [SETr ]/[SET]: The desired recording level can be set. AGC: Auto Gain Control 月曜日 午後１時４６分 Effect/Setting method When recording, the input level from the built-in microphones can be adjusted. ≥ The Intelligent auto mode is set to off. (l 39) 1 Select the menu. (l 29) [RECORD SETUP] # [MIC LEVEL] # [SETr 2 Touch level.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 62 ページ ２００９年７月６日 Function 月曜日 午後１時４６分 Effect/Setting method Hi-speed burst shooting Recording is done continuously at the rate of 24 or 60 still pictures per second. Use this function to record an object with fast movement. [24 frames/sec] 72 still pictures are recorded continuously at the rate of 24 per second. The picture size is 2.1 M (1920k1080). ≥ The Intelligent auto mode is set to off.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 63 ページ Function Self-timer ２００９年７月６日 月曜日 午後１時４６分 Effect/Setting method This is for recording still pictures using the timer. Select the menu. (l 29) [PICTURE] # [SELF TIMER] # [10 SECONDS] or [2 SECONDS] [10 SECONDS]: Records after 10 seconds [2 SECONDS]: Records after 2 seconds ≥ When the button is pressed, a still picture is recorded after the Ø10 or Ø2 display and the recording lamp flash for the time which has been set.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 64 ページ ２００９年７月６日 Function Red eye reduction 月曜日 午後１時４６分 Effect/Setting method Reduces the phenomena where human eyes become red from flashes. ≥ The Intelligent auto mode is set to off. (l 39) Select the menu. (l 29) [PICTURE] # [RED EYE] # [ON] Shutter sound You can add a shutter sound when recording still pictures. Select the menu. (l 29) [PICTURE] # [SHTR SOUND] # [ON] ≥ This function’s default setting is [ON].
HDCSD10_TM10_TM15P-VQT2H52_eng.book 65 ページ ２００９年７月６日 Digital cinema color: ≥ When motion pictures recorded while this function is turned [ON] are played back with a TV not compatible with x.v.Color™, colors may not be reproduced properly. ≥ To play back images recorded in Digital cinema color with vivid colors of wider color ranges, a device compatible with x.v.Color™ is required. When these images are played back with devices other than ones compatible with x.v.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 66 ページ ２００９年７月６日 月曜日 午後１時４６分 Recording Manual recording 3 Recording (Advanced) Touch the operation icon to adjust white balance, shutter speed, iris and manual focus. ¬ Change the mode to . Press the MANUAL button. ≥ MNL appears on the screen. Perform the setting by touching the desired item to be set. ≥ Touch 1 to change the page and touch F F to display/not-display the operation icon.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 67 ページ ２００９年７月６日 月曜日 午後１時４６分 White balance The automatic white balance function may not reproduce natural colors depending on the scenes or lighting conditions. If so, you can adjust the white balance manually. The unit can record pictures in a natural hue if it can recognize the reference color white. ≥ Press the MANUAL button. (l 66) 1 Touch [WB]. ∫ To set the white balance manually 2 Touch / to select White Balance mode. 1 Select subject.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 68 ページ ２００９年７月６日 月曜日 午後１時４６分 Manual shutter speed/iris adjustment Shutter Speed: Adjust it when recording fast-moving subjects. Iris: Adjust it when the screen is too bright or too dark. ≥ Press the MANUAL button. (l 66) 1 Touch [SHTR] or [IRIS]. 2 Touch / to adjust settings. 1/100 100 F WB SHTR IRIS MF SHTR Shutter speed: 1/60 to 1/8000 ≥ If [AUTO SLOW SHTR] is set to [ON], the shutter speed will be set between 1/30 and 1/8000.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 69 ページ ２００９年７月６日 Manual focus adjustment Adjust the quality of the image while recording. Adjust by outputting to a TV while adjusting the quality of the image. ≥ Press the MANUAL button. (l 66) (When MF assist function is used) 1 Select the menu. (l 29) ≥ This function’s default setting is [ON]. 2 Touch [MF] icon. F WB SHTR IRIS Touch the desired setting items. MF ≥ In Manual Focus mode, [AF] icon appears on the screen. 3 Select the menu.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 70 ページ ２００９年７月６日 月曜日 午後１時４６分 Playback Playback 1 Motion picture playback 1 Change the mode to 2 Touch the play mode select icon A to select desired media to be played back. . 4 Select the playback operation by touching the operation icon. 0h00m00s F ≥ Touch [VIDEO/SD CARD] to play back the SD card. / Touch [VIDEO/Built-in Memory] to play back the built-in memory. 3 Touch the scene to be played back. ≥ Next (previous) page can be displayed by touching / .
HDCSD10_TM10_TM15P-VQT2H52_eng.book 71 ページ ２００９年７月６日 月曜日 午後１時４６分 ∫ Change the thumbnail display ∫ Slow-motion playback During step 3, the thumbnail display changes in the following order if the zoom lever is operated to _ side or ` side. 20 scenes () 9 scenes () 1 scene () Highlight&Time frame index 1 ≥ Refer to page 73 for information about Highlight&Time frame index. ≥ 9 scenes display returns if the power is turned off or the mode is changed.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 72 ページ ２００９年７月６日 ∫ Frame-by-frame playback The motion picture is advanced one frame at a time. 1 Pause the playback. ≥ When the operation icon disappears, touch the screen to display the icon again. 2 Touch . (Touch to advance the frames one at a time in the reverse direction.) F ≥ Normal playback is restored when you touch . ≥ When the frames are advanced one at a time in the reverse direction, they will be shown in intervals of 0.5 seconds.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 73 ページ ２００９年７月６日 Creating still picture from motion picture A single frame from the recorded motion picture can be saved as a still picture. 1 Pause at the scene you want to save as a still picture during playback. ≥ It is convenient to use slow-motion playback and frame-by-frame playback. 2 Press the 月曜日 午後１時４６分 Highlight&Time frame index An image of one scene is displayed as a thumbnail at set time interval.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 74 ページ ２００９年７月６日 Playing back motion pictures by date Scenes recorded on the same day can be played back in succession. 1 Touch the date select icon. 月曜日 午後１時４６分 Intelligent scene selection Play back the scenes excluding a portion of the scene judged to have failed to shoot due to fast movement of this unit, camera shake, or focus error. 1 Touch 2 Touch [INTEL. SCENE]. 3 Touch the scene to be played back. . A Date select icon 2 Touch the playback date.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 75 ページ ２００９年７月６日 Highlight playback Part that was recognized as clearly recorded is extracted from a long recording, and it can be played back in short time with music added. 1 Touch 月曜日 午後１時４６分 ∫ Scene setting 1) Touch [SELECT SCENES] or [SELECT DATE]. . 2) (When [SELECT SCENES] is selected) Touch the scene to be played back. 2 Touch [HIGHLIGHT]. 3 Touch the desired item. ≥ Up to 99 scenes can be selected in succession.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 76 ページ ２００９年７月６日 ∫ Playback time setting Touch the playback time to set. 月曜日 午後１時４６分 Repeat playback Playback of the first scene starts after playback of the last scene finishes. Select the menu. (l 29) [VIDEO SETUP] # [REPEAT PLAY] # [ON] ≥ The playback time of [AUTO] is a maximum of approx. 5 minutes. ≥ Playback time may become shorter than the setting, or it may not even play back if the part recognized as clearly recorded is short.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 77 ページ ２００９年７月６日 月曜日 午後１時４６分 Playback Playback 2 Still picture playback 1 Change the mode to 2 Touch the play mode select icon A to select desired media to be played back. . ≥ Touch [PICTURE/SD CARD] to play back the SD card. / Touch [PICTURE/Built-in Memory] to play back the built-in memory. 3 Touch the still picture to be played back.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 78 ページ 4 ２００９年７月６日 Select the playback operation by touching the operation icon. 月曜日 午後１時４６分 ∫ Changing the playback settings for the slide show 1) Touch . F 1/;: Slide show (playback of the still pictures in numerical order) start/pause. 2;: Plays back the previous picture. ;1: Plays back the next picture. ∫: Stops the playback and shows the thumbnails. ≥ Touch F F to display/not-display the operation icon.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 79 ページ ２００９年７月６日 Still picture compatibility ≥ This unit is compliant with the unified standard DCF (Design rule for Camera File system) established by JEITA (Japan Electronics and Information Technology Industries Association). ≥ The file format of still pictures supported by this unit is JPEG. (Not all JPEG formatted files will be played back.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 80 ページ ２００９年７月６日 月曜日 午後１時４６分 Playback 1 Editing Deleting scenes/still pictures Deleted scenes/still pictures cannot be restored, so perform appropriate confirmation of the contents before proceeding with deletion. ¬ Change the mode to . To delete by confirming images being played back Press the button while scenes or still pictures to be deleted are being played back. ≥ When the confirmation message appears, touch [YES].
HDCSD10_TM10_TM15P-VQT2H52_eng.book 81 ページ ２００９年７月６日 月曜日 午後１時４６分 (Only when [SELECT] is selected in step 2) To continue deleting other scenes Repeat steps 3-4. When you stop deleting halfway Touch [CANCEL] or press the MENU button while deleting. ≥ The scenes or still pictures that have already been deleted when the deletion is canceled cannot be restored. To complete editing Press the MENU button.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 82 ページ ２００９年７月６日 月曜日 午後１時４６分 Playback Editing 2 Dividing a scene to partially delete To delete an unnecessary portion of a scene, first divide the scene and then delete the unnecessary portion. ¬ Change the mode to 1 2 . Touch the play mode select icon to select the desired media to divide a scene. (l 70) 6 Select the menu. (l 29) To delete all the divided points [EDIT SCENE] # [DIVIDE] # [SET] 3 4 Touch the scene to be divided. Touch point.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 83 ページ ２００９年７月６日 月曜日 午後１時４６分 Playback Editing 3 Protecting scenes/still pictures Scenes/still pictures can be protected so that they are not deleted by mistake. (Even if you protect some scenes/still pictures, formatting the media will delete them.) ¬ Change the mode to 1 . Select the menu. (l 29) [VIDEO SETUP] or [PICT. SETUP] # [SCENE PROTECT] # [YES] 2 Touch the scene/still picture to be protected.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 84 ページ ２００９年７月６日 月曜日 午後１時４６分 Playback 4 Editing DPOF setting You can write the data selecting still pictures to be printed and the number of prints (DPOF data) onto the SD card. ¬ Change the mode to SD CARD].
HDCSD10_TM10_TM15P-VQT2H52_eng.book 85 ページ ２００９年７月６日 月曜日 午後１時４６分 Playback Editing 5 Copying between SD card and Built-in Memory [HDC-TM10/HDC-TM15] Motion pictures or still pictures recorded with this unit can be copied between an SD card inserted in this unit and a built-in memory. Confirming remaining capacity on the copy destination ≥ If the remaining capacity on a single SD card is not enough, you can copy to multiple SD cards following the instruction on the screen.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 86 ページ ２００９年７月６日 月曜日 午後１時４６分 Copying ≥ If there is not much remaining capacity in the SD card, a confirmation message asking to copy after deleting all data on the SD card is displayed. Be aware that deleted data cannot be restored. ≥ Refer to page 87 for approximate time for copying. 1 Change the mode to . ≥ Use a sufficiently charged battery or the AC adaptor. 4 (Only when [VIDEO]/[PICTURE] is selected in step 3) 2 Touch the desired item. Select the menu.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 87 ページ ２００９年７月６日 月曜日 午後１時４６分 (Only when [SELECT DATE] is selected in step 4) Touch the date to be copied. ≥ When touched, the date is selected and surrounded by red. Touch the date again to cancel the operation. ≥ Up to 99 dates can be set in succession. 6 (Only when [SELECT SCENES]/ [SELECT DATE] is selected in step 4) Touch [Enter]/[ENTER]. 7 When the confirmation message appears, touch [YES].
HDCSD10_TM10_TM15P-VQT2H52_eng.book 88 ページ ２００９年７月６日 月曜日 午後１時４６分 Playback Editing 6 Relay scene combining [HDC-TM10/HDC-TM15] You can combine the relayed scene (l 58) in the built-in memory and the continued scene in the SD card to be one into the SD card. Relay recorded scene Relay scene combining A Built-in memory B SD card C Range of relay recording ≥ Change the mode to (l 70) and touch the play mode select icon to select the desired media.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 89 ページ ２００９年７月６日 月曜日 午後１時４６分 Playback Editing 7 Formatting Please be aware that if a medium is formatted, then all the data recorded on the medium will be erased and cannot be restored. Back up important data on a PC, DVD disc etc. (l 96, 107) ¬ Change the mode to 70, 77) or , and select desired media to be formatted. (l 42, Select the menu.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 90 ページ ２００９年７月６日 月曜日 午後１時４６分 Playback With a TV 1 Watching Video/Pictures on your TV Confirm the terminals on your TV and use a cable compatible with the terminals. Image quality may vary with the connected terminals. 1 High quality 2 HDMI terminal 3 Component terminal 4 Video terminal ≥ Use the supplied component cable and AV cable. Use of the following Panasonic HDMI mini cables is recommended to connect the unit to the HDMI terminal.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 91 ページ ２００９年７月６日 月曜日 午後１時４６分 ≥ Check that the plugs are inserted as far as they go. ≥ Do not use any other cables except a genuine Panasonic HDMI mini cable (RP-CDHM15, RP-CDHM30; optional). ≥ Do not use any other component cables except the supplied one. ≥ The component terminal is for outputting images only so be sure to also connect the AV cable. (It is not necessary to connect the yellow plug.) ≥ Do not use any other AV cables except the supplied one.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 92 ページ ２００９年７月６日 ∫ To watch images on a regular TV (4:3) or when both sides of the images do not appear on the screen Change the menu setting to display the images correctly. (Check the TV setting.) Select the menu. (l 29) [SETUP] # [TV ASPECT] # [4:3] Example of images with a 16:9 aspect ratio on a regular TV (4:3) [TV ASPECT] setting [16:9] [4:3] ≥ If a wide-screen TV is connected, adjust the aspect setting on the TV.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 93 ページ ２００９年７月６日 月曜日 午後１時４６分 Connecting with a HDMI mini cable What is HDMI? HDMI is the interface for digital devices. If you connect this unit to a HDMI compatible high definition TV and then play back the recorded high definition images, you can enjoy them in high resolution with high quality sound. If you connect this unit to a Panasonic TV compatible with VIERA Link, linked operations (VIERA Link) are possible. (l 94) Select the desired method of HDMI output.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 94 ページ ２００９年７月６日 月曜日 午後１時４６分 Playback With a TV 2 Playback using VIERA Link™ (HDAVI Control™) What is the VIERA Link? ≥ VIERA Link™ is a new name for EZ Sync™. ≥ This function allows you to use your remote control for the Panasonic TV for easy operations when this unit has been connected to a VIERA Link compatible device using a HDMI mini cable (optional) for automatic linked operations. (Not all operations are possible.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 95 ページ 3 ２００９年７月６日 月曜日 午後１時４６分 Operate with the remote control for the TV. 1) 2) 1) Press the button up, down, left or right to select a scene or still picture to be played back, and then press the button in the center to set it. 2) Activate the operation icons that are displayed on TV screen with the remote control for the TV.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 96 ページ ２００９年７月６日 月曜日 午後１時４６分 Backup With other products 1 Connecting a DVD burner to copy to/play back a disc Motion pictures or still pictures recorded with this unit can be copied to a DVD disc by connecting a DVD burner (optional) to this unit using a Mini AB USB Connection Cable (supplied with DVD burner). The copied DVD disc can also be played back. ≥ Please read the operating instructions of the DVD burner for how to use it.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 97 ページ 1 ２００９年７月６日 月曜日 午後１時４６分 Connect the AC adaptor (supplied with DVD burner) to the DVD burner. ≥ You cannot supply power to the DVD burner from this unit. 2 Connect this unit to the AC adaptor and change the mode to 3 Connect this unit to the DVD burner with the Mini AB USB Connection Cable (supplied with DVD burner). . A Mini AB USB Connection Cable (supplied with DVD burner) B DVD burner (optional) ≥ Insert the plugs as far as they will go.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 98 ページ ２００９年７月６日 月曜日 午後１時４６分 Copying to discs ≥ You cannot copy from multiple SD cards to 1 disc. (You can additionally copy only to a DVD-RAM.) ≥ Motion pictures and still pictures cannot both be copied to a single disc. ≥ Confirm that auto protection is [ON] before copying data.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 99 ページ 6 ２００９年７月６日 (Only when [SELECT SCENES] is selected 7 in step 5) Touch the scene you want to copy. step 5) Touch the date you want to copy. 午後１時４６分 (Only when [SELECT SCENES]/ [SELECT DATE] is selected in step 5) Touch [Enter]/[ENTER]. ≥ Touch [NEXT]. 8 ≥ When touched, the scene is selected and the indication appears on the thumbnail. Touch the scene again to cancel the operation. ≥ Up to 99 scenes can be selected in succession.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 100 ページ ２００９年７月６日 月曜日 午後１時４６分 Approximate time for copying to a disc To copy motion pictures to the full capacity of a disc Copy time Disc type [High Definition] DVD-RAM Approx. 50 min to 80 min DVD-RW* Approx. 35 min to 75 min DVD-R* Approx. 15 min to 45 min [Standard (XP)] [Standard (SP)] Approx. 90 min to 120 min Approx.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 101 ページ ２００９年７月６日 月曜日 午後１時４６分 Playing back the copied disc ≥ Only discs that have been copied by connecting this unit to the DVD burner or created with HD Writer AE 1.5 can be played back. It may not be possible to play back discs copied/played back on other devices or software. A Mini AB USB Connection Cable (supplied with DVD burner) 1 Connect this unit to the DVD burner to prepare for playback.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 102 ページ ２００９年７月６日 月曜日 午後１時４６分 Managing the copied disc (Formatting, Auto protect, Displaying disc information) ≥ Connect this unit to the DVD burner and then touch [PLAY DISC]. (l 96) ∫ Formatting discs ∫ Auto protect This is for initializing DVD-RAM and DVD-RW discs. You can protect (write protect) a DVD-RAM or DVD-RW disc when copying motion pictures or still pictures in high definition picture quality to the disc.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 103 ページ ２００９年７月６日 月曜日 午後１時４６分 Backup With other products 2 Dubbing images onto other video devices Images played back on this unit can be dubbed onto a DVD recorder or video device. ≥ Images are dubbed in standard quality. ≥ Use the AC adaptor to free you from worrying about the battery running down. Change the video input on the video device and TV that this unit is connected to.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 104 ページ ２００９年７月６日 月曜日 午後１時４６分 Backup With other products 3 With a printer (PictBridge) To print pictures by directly connecting this unit to the printer, use a printer compatible with PictBridge. (Read the operating instructions for the printer.) PictBridge is an industry standard from the Camera & Imaging Products Association (CIPA) for direct printing.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 105 ページ ２００９年７月６日 月曜日 午後１時４６分 4 Touch a still picture to be printed. 8 5 Touch prints. [STANDARD]: Size specific to the printer [4k5 INCH]: L size [5k7 INCH]: 2L size [4k6 INCH]: Postcard size [A4]: A4 size ≥ You cannot set paper sizes not supported on the printer. / to set the number of 9 ≥ Touch [ENTER] after the number of prints is set. ≥ You can set up to 9 prints. ≥ To cancel the setting, set the number of prints to [0].
HDCSD10_TM10_TM15P-VQT2H52_eng.book 106 ページ ２００９年７月６日 When you stop printing halfway Touch [CANCEL]. ≥ A confirmation message appears. If [YES] is selected, the number of prints set is canceled and the screen returns to step 4. If [NO] is selected, all the settings are kept and the screen returns to step 4. ≥ Avoid the following operations during printing. These operations disable proper printing.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 107 ページ ２００９年７月６日 月曜日 午後１時４６分 With a PC Before using 1 What you can do with a PC HD Writer AE 1.5 You can copy the motion/still picture data to the HDD of PCs or write to media like Blu-ray discs (BD), DVD discs or SD cards using HD Writer AE 1.5, the software installed in the supplied CD-ROM. Refer to the operating instructions of HD Writer AE 1.5 (PDF file) for details on how to use it.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 108 ページ Available function ２００９年７月６日 月曜日 Data type Playing back on a PC Still picture Copying still pictures to a PC (l 116) 午後１時４６分 Software required HD Writer AE 1.5 or standard Windows picture viewer or a commercially available picture viewer Windows Explorer Refer to page 118 if using a Mac. Important Notice ≥ Do not insert a disc recorded in AVCHD format with HD Writer AE 1.5 in a device that does not support the AVCHD format.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 109 ページ ２００９年７月６日 月曜日 午後１時４６分 End User License Agreement Before opening the CD-ROM package, please read the following. You (“Licensee”) are granted a license for the Software defined in this End User License Agreement (“Agreement”) on condition that you agree to the terms and conditions of this Agreement.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 110 ページ ２００９年７月６日 月曜日 午後１時４６分 With a PC Before using 2 Operating environment ≥ Even if the system requirements mentioned in these operating instructions are fulfilled, some PCs cannot be used. ≥ A CD-ROM drive is necessary to install the supplied software applications. (A compatible BD/DVD writer drive and media are necessary for writing to a BD/DVD.) ≥ Operation is not guaranteed in the following cases.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 111 ページ ２００９年７月６日 Sound DirectSound Support Interface USB port [Hi-Speed USB (USB 2.0)] Other requirements Mouse or equivalent pointing device Internet connection 月曜日 午後１時４６分 ≥ Supplied CD-ROM is available for Windows only. ≥ Input is not supported in languages other than English, German, French and Simplified Chinese. ≥ Operation cannot be guaranteed on all BD/DVD drives.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 112 ページ ２００９年７月６日 月曜日 午後１時４６分 With a PC Setup 1 Installation When installing the software, log on to your computer as the Administrator or with a user name with equivalent authorization. (If you do not have authorization to do this, consult your manager.) ≥ Before starting the installation, close all applications that are running. ≥ Do not perform any other operations on your PC while the software is being installed.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 113 ページ ２００９年７月６日 月曜日 午後１時４６分 ∫ Uninstalling HD Writer AE 1.5 7 When installation is complete, some notes will appear Check the contents, then close the window. 8 Follow the steps below to uninstall any software applications that you no longer require. 1 Select [start] # ([Settings] #) [Control Panel] # [Add or Remove Programs (Applications)] or [Uninstall a program]. 2 Select [HD Writer AE 1.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 114 ページ ２００９年７月６日 月曜日 午後１時４６分 With a PC Setup 2 Connecting to a PC ≥ Connect this unit to the PC after the software applications are installed. ≥ Remove the supplied CD-ROM from your PC. A USB cable (supplied) 1 Connect this unit to the AC adaptor. ≥ It is possible to use the unit connected to the PC with the batteries only, but you will not be able to write data into the unit. 2 Turn on the unit. ≥ This function is available in all modes.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 115 ページ ２００９年７月６日 月曜日 午後１時４６分 ∫ If the driver has not been recognized properly Use the following methods to enable it to be recognized. Method 1: Turn off the unit and your PC once and try verifying again. Method 2: Remove the SD card and try verifying again. Method 3: Try connecting the unit to another USB port on your PC. ∫ To disconnect USB cable safely 1 2 Double click the ( ) icon in task tray displayed on the PC.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 116 ページ ２００９年７月６日 月曜日 午後１時４６分 About the PC display When the unit is connected to a PC, it is recognized as an external drive. ≥ Removable disk (Example: ) is displayed in [My Computer (Computer)]. We recommend using HD Writer AE 1.5 to copy or write back motion picture data. Using Windows Explorer or other programs on the PC to copy, move or rename files and folders recorded with this unit will result in them being unusable with HD Writer AE 1.5.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 117 ページ ２００９年７月６日 月曜日 午後１時４６分 With a PC Using with a PC 1 Starting HD Writer AE 1.5 ≥ When using HD Writer AE 1.5 on Windows XP, log on to your computer as Administrator (or with a login name equally authorized). If you log on with a login name other than Administrator, you cannot use the applications. ≥ When using HD Writer AE 1.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 118 ページ ２００９年７月６日 月曜日 午後１時４６分 With a PC Using with a PC If using Mac 2 ≥ HD Writer AE 1.5 is not available for Mac. ≥ iMovie’09 supported. For details about iMovie’09, please contact Apple Inc. ∫ Operating environment PC Mac OS Mac OS X 10.5.6 CPU Intel Core Duo Intel Core 2 Duo RAM 1 GB or more Interface USB port ≥ Even if the system requirements mentioned in these operating instructions are fulfilled, some PCs cannot be used.
HDCSD10_TM10_TM15P-VQT2H52_eng.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 120 ページ ２００９年７月６日 月曜日 Red eye reduction (l 64) Scene mode (l 56) 5/ , Sports mode / Portrait mode / Spotlight mode / Snow mode / Beach mode Picture quality (l 47) Number of recording pixels for still pictures (l 48) 1920k1080 2.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 121 ページ ２００９年７月６日 ∫ Playback indications 1 Playback (l 70, 78) ; Pause (l 70, 78) 5, 6, / Last/first scene paused D/E Slow motion playback (l 71) ;1/2; Frame-by-frame playback (l 72) Next/Previous still picture (l 78) F F 0h00m00s Accessing the card (When connected to a PC) (l 114) Accessing the built-in memory (When connected to a PC) (l 114)* ∫ Confirmatory indications –– (Time display) The built-in battery is low.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 122 ページ ２００９年７月６日 月曜日 午後１時４６分 Others Messages 2 Indications Major confirmation/error messages to be indicated on the screen in text. RECOMMEND DATA BACK UP PERIODICALLY.* We recommend backing up important recorded motion pictures and still pictures periodically to a PC, DVD disc etc. to protect it. This message does not indicate that there is a problem with this unit. CHECK CARD. This card is not compatible or it cannot be recognized by the unit.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 123 ページ ２００９年７月６日 月曜日 午後１時４６分 About recovery If faulty management information is found, one of the following messages may appear. Be sure to follow directions in the messages. (Repairing may take time depending on the error.) CONTROL DATA ERROR HAS BEEN DETECTED. (SD CARD) CONTROL DATA ERROR DETECTED IN THE BUILT-IN MEMORY.* THUMBNAIL DATA ERROR IS DETECTED.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 124 ページ ２００９年７月６日 月曜日 午後１時４６分 Others Helpful hints 1 Functions that cannot be used simultaneously Some functions in this unit are disabled or cannot be selected due to the unit’s specifications.
HDCSD10_TM10_TM15P-VQT2H52_eng.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 126 ページ ２００９年７月６日 月曜日 午後１時４６分 Others Helpful hints 2 Problem This unit cannot be turned on. This unit does not stay on long enough. Battery runs down quickly. Troubleshooting Check points ≥ Charge the battery using the AC adaptor. (l 19) ≥ The battery protection circuit may have operated. Attach the battery to the AC adaptor for 5 to 10 seconds. If the unit still cannot be used, the battery is faulty. ≥ The battery is affected by ambient temperature.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 127 ページ Problem This unit cannot be operated though it is turned on. This unit does not operate normally. ２００９年７月６日 月曜日 午後１時４６分 Check points ≥ Turn on the power again. If normal conditions are not restored yet, remove the battery or AC adaptor, wait about 1 minute and then reconnect the battery or AC adaptor. Then about 1 minute later, turn on the power again. (Conducting the above operation while the media is being accessed may damage the data on the media.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 128 ページ Problem ２００９年７月６日 月曜日 午後１時４６分 Check points “ENVIRONMENT TOO DARK, OR LENS COVER CLOSED.” is displayed. ≥ Before turning on the power, open the lens cover. ≥ This message may also be displayed when recording in a very dark location. Color balance of images is strange when recording in a place such as a gymnasium. ≥ In a place with multiple light sources, such as a gymnasium or a hall, set the white balance setting to (Indoor mode2).
HDCSD10_TM10_TM15P-VQT2H52_eng.book 129 ページ ２００９年７月６日 月曜日 午後１時４６分 Problem Check points Color or brightness of the image changes, or you may see horizontal bars in the image. ≥ Color or brightness of the image may change, or you may see horizontal bars in the image when the object is recorded under fluorescent light, mercury light or sodium light, etc., but this is not a malfunction.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 130 ページ Problem ２００９年７月６日 月曜日 午後１時４６分 Check points When connected by the USB cable, this unit is not detected by the PC. ≥ Select another USB terminal on the PC. ≥ Check the operating environment. (l 110) ≥ Connect the supplied USB cable again after restarting the PC and turning on this unit again. When the USB cable is disconnected, an error message will appear on the PC.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 131 ページ ２００９年７月６日 月曜日 午後１時４６分 ∫ If scenes do not change smoothly when played back on another device The images may be still for several seconds at the joins between the scenes if the following operations are performed when multiple scenes have been continuously played back using another unit. ≥ Just how smoothly the scenes will be played back depends on the playback unit.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 132 ページ ２００９年７月６日 月曜日 午後１時４６分 ∫ When deleting scenes 1 Scene to be deleted A The image will be still for several seconds wherever a scene was deleted. B The images of consecutive scenes where there are no deletions are played back smoothly one after another. ∫ When selected scenes are copied between an SD card and the built-in memory or when selected scenes are copied to a disc in a connected DVD burner.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 133 ページ ２００９年７月６日 月曜日 午後１時４６分 Others Cautions for use About this unit The unit and the SD card become warm during use. This is not a malfunction. Keep the High Definition Video Camera as far away as possible from electromagnetic equipment (such as microwave ovens, TVs, video games etc.). ≥ If you use the High Definition Video Camera on top of or near a TV, the pictures and sound on the High Definition Video Camera may be disrupted by electromagnetic wave radiation.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 134 ページ ２００９年７月６日 / When disposing of or giving away this unit, note that: ≥ Formatting and deletion simply change the file management information and cannot be used to completely erase the data in built-in memory of this unit. The data can be recovered using commercially available software or the like. ≥ We recommend that you physically format the built-in memory before disposing of or giving away this unit.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 135 ページ ２００９年７月６日 Do not throw an old battery into fire. ≥ Heating a battery or throwing it into a fire may result in an explosion. If the operating time is very short even after the battery has been recharged, the battery has worn out. Please purchase a new battery. 月曜日 午後１時４６分 Extremely high precision technology is employed to produce the LCD Monitor screen featuring a total of approximately 230,000 pixels. The result is more than 99.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 136 ページ ２００９年７月６日 月曜日 午後１時４６分 Others Specifications High Definition Video Camera Information for your safety Power source: Power consumption: DC 9.3 V (When using AC adaptor) DC 7.2 V (When using battery) Recording: 5.5 W / 5.6 W HDC-SD10 HDC-TM10 HDC-TM15 Signal system 1080/60i Recording format AVCHD format compliant Image sensor 1/6z 1MOS image sensor Total: 1470 K Effective pixels: Motion picture: 1170 K Still picture: 1170 K Lens Auto Iris, F1.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 137 ページ ２００９年７月６日 HDC-SD10 月曜日 午後１時４６分 HDC-TM10 AV terminal video output level 1.0 Vp-p, 75 h, NTSC system Component terminal video output level Y: 1.0 Vp-p, 75 h Pb: 0.7 Vp-p, 75 h Pr: 0.7 Vp-p, 75 h HDMI mini connector video output level HDMI™ (x.v.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 138 ページ ２００９年７月６日 月曜日 午後１時４６分 Motion pictures HDC-SD10 Recording media SD card Built-in memory HDC-TM10 HDC-TM15 SD Memory Card: 1 GB, 2 GB (FAT12 and FAT16 system compliant) SDHC Memory Card: 4 GB, 6 GB, 8 GB, 12 GB, 16 GB, 32 GB (FAT32 system compliant) – 8 GB Compression MPEG-4 AVC/H.264 Recording mode and transfer rate HA: Approx. 17 Mbps (VBR) HG: Approx. 13 Mbps (VBR) HX: Approx. 9 Mbps (VBR) HE: Approx.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 139 ページ ２００９年７月６日 月曜日 午後１時４６分 AC adaptor Information for your safety Power source: Power consumption: DC output: AC 110 V to 240 V, 50/60 Hz 19 W DC 9.3 V, 1.2 A (Unit operation) DC 8.4 V, 0.65 A (Battery charging) Dimensions 92 mm (W)k33 mm (H)k61 mm (D) [3.6 q (W)k1.3 q (H)k2.4 q (D)] Mass (Weight) Approx. 115 g (Approx. 0.25 lbs.) Specifications may change without prior notice.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 140 ページ ２００９年７月６日 月曜日 午後１時４６分 Optional accessories Accessory No. Figure Description VW-AD21PP-K*1 AC adaptor with AC Cable and DC Cables VW-VBG070*2 Rechargeable Lithium Ion Battery Pack VW-VBG130*2 Rechargeable Lithium Ion Battery Pack VW-VBG260*2 Rechargeable Lithium Ion Battery Pack ≥ The battery pack holder kit VW-VH04 (optional) is necessary.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 141 ページ Accessory No.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 142 ページ ２００９年７月６日 月曜日 午後１時４６分 Accessory Order Form (For USA and Puerto Rico Customers) Please photocopy this form when placing an order. 1. Model # 2. Items Ordered Accessory # Description Price Each Quantity Total Price Subtotal Your State & Local Sales Tax Shipping & Handling 6.95 Total Enclosed 3. Method of payment (check one) Check of Money Order enclosed (NO C.O.D.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 143 ページ ２００９年７月６日 月曜日 午後１時４６分 Request for Service Notice (USA and Puerto Rico Only) Please photocopy this form when making a request for service notice, in the unlikely event this product needs service. Request for Service Notice: •Please include your proof of purchase. (Failure to do so will delay your repair.) •To further speed your repair, please provide an explanation of what is wrong with the unit and any symptom it is exhibiting.
HDCSD10_TM10_TM15P-VQT2H52_eng.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 145 ページ ２００９年７月６日 月曜日 午後１時４６分 Customer Services Directory (United States and Puerto Rico) Obtain Product Information and Operating Assistance; locate your nearest Dealer or Service Center; purchase Parts and Accessories; or make Customer Service and Literature requests by visiting our Web Site at: http://www.panasonic.com/help or, contact us via the web at: http://www.panasonic.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 146 ページ ２００９年７月６日 月曜日 午後１時４６分 Index ∫A ∫H A/V terminal . . . . . . . . . . . . . . . . . . .16, 90, 103 AC adaptor . . . . . . . . . . . . . . . . . . . .19, 23, 135 AF tracking . . . . . . . . . . . . . . . . . . . . . . . . . . .51 Alert sound . . . . . . . . . . . . . . . . . . . . . . . . . . .32 Auto focus . . . . . . . . . . . . . . . . . . . . . . . . . . .40 Auto Ground-Directional Standby (AGS) . . . .58 Auto slow shutter . . . . . . . . . . . . . . . . . .
HDCSD10_TM10_TM15P-VQT2H52_eng.book 147 ページ ２００９年７月６日 月曜日 午後１時４６分 ∫R Recordable time . . . . . . . . . . . . . . . . . . . .21, 44 Recording lamp . . . . . . . . . . . . . . . . . . . . . . .31 Recording modes . . . . . . . . . . . . . . . . . . . . . .44 Recording time elapsed . . . . . . . . . . . . . . . . .43 Recovery . . . . . . . . . . . . . . . . . . . . . . . . . . .123 Red eye reduction . . . . . . . . . . . . . . . . . . . . .64 Relay recording . . . . . . . . . . . . . . . . . . . . . . .
HDCSD10_TM10_TM15P-VQT2H52_eng.book 148 ページ ２００９年７月６日 月曜日 午後１時４６分 Spanish Quick Use Guide/Guía española para el uso rápido ∫ Carga de la batería Luz indicadora de carga [CHARGE] A Encendida: Carga en curso Apagada: Carga completada 1 Conecte el cable de CA al adaptador de CA y a la toma de CA. 2 Instale la batería el adaptador de CA alineando las flechas. ∫ Inserción de la batería 1) Abra la tapa de la tarjeta SD empujando la OPEN palanca B.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 149 ページ ２００９年７月６日 月曜日 午後１時４６分 ∫ Selección del modo ∫ Grabación de películas Utilice el selector de modo para cambiar el modo a o . 1) Cambie el modo a . 2) Abra la pantalla LCD. ≥ Para usuarios quienes tienen , proceda al Paso 4. 3) / Pulse el botón MENU, luego toque [SELEC MEDIO] # [MEM INTERNA] o [TARJETA SD]. 4) Pulse el botón de inicio/parada de grabación para iniciar la grabación.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 150 ページ ２００９年７月６日 月曜日 午後１時４６分 ∫ Reproducción de películas ∫ Reproducción de fotografías 1) Cambie el modo a . 2) Toque el icono A de selección del modo de reproducción para seleccionar el medio deseado a ser reproducido. 1) Cambie el modo a . 2) Toque el icono A de selección del modo de reproducción para seleccionar el medio deseado a ser reproducido. ≥ Toque [VÍDEO/TARJETA SD] para reproducir la tarjeta SD.
HDCSD10_TM10_TM15P-VQT2H52_eng.
HDCSD10_TM10_TM15P-VQT2H52_eng.
