HDCSD100P-VQT1T64_ENG.book 1 ページ ２００８年７月１４日 月曜日 午後８時２分 Operating Instructions High Definition Video Camera Model No. HDC-SD100P/PC Before connecting, operating or adjusting this product, please read the instructions completely. Spanish Quick Use Guide is included. Guía para rápida consulta en español está incluida. For USA assistance, please call: 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.
HDCSD100P-VQT1T64_ENG.book 2 ページ ２００８年７月１４日 月曜日 午後８時２分 Things You Should Know Date of Purchase Thank you for choosing Panasonic! You have purchased one of the most sophisticated and reliable products on the market today. Used properly, we’re sure it will bring you and your family years of enjoyment. Please take time to fill in the information on the right. The serial number is on the tag located on the underside of your camera.
HDCSD100P-VQT1T64_ENG.book 3 ページ ２００８年７月１４日 月曜日 午後８時２分 THE FOLLOWING APPLIES ONLY IN THE U.S.A. FCC Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
HDCSD100P-VQT1T64_ENG.book 4 ページ ２００８年７月１４日 月曜日 午後８時２分 Batteries 1 Battery pack (Lithium ion battery pack) ≥ Use the specified unit to recharge the battery pack. ≥ Do not use the battery pack with equipment other than the specified unit. ≥ Do not get dirt, sand, liquids, or other foreign matter on the terminals. ≥ Do not touch the plug terminals (i and j) with metal objects. ≥ Do not disassemble, remodel, heat or throw into fire. 2 Button-type battery (Lithium battery) ≥ Insert with poles aligned.
HDCSD100P-VQT1T64_ENG.book 5 ページ ２００８年７月１４日 月曜日 午後８時２分 IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference. 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water.
HDCSD100P-VQT1T64_ENG.book 6 ページ ２００８年７月１４日 月曜日 午後８時２分 Precautions USE & LOCATION WARNING ≥ TO AVOID SHOCK HAZARD ... Your camera and power supply should not be exposed to rain or moisture. Do not connect the power supply or operate your camera if it gets wet. Your camera has been designed for outdoor use, however it is not designed to sustain direct exposure to water, rain, sleet, snow, sand, dust, or a direct splashing from a pool or even a cup of coffee.
HDCSD100P-VQT1T64_ENG.book 7 ページ ２００８年７月１４日 IMPORTANT ∫ Carefully observe copyright laws Whatever you have recorded and created can be used for your personal entertainment only. Under copyright laws, other materials cannot be used without obtaining permission from the holders of the copyrights. ∫ Cards that you can use with this unit SD Memory Card and SDHC Memory Card ≥ 4 GB (or more) Memory Cards that do not have the SDHC logo are not based on SD Memory Card Specifications.
HDCSD100P-VQT1T64_ENG.book 8 ページ ２００８年７月１４日 月曜日 午後８時２分 Contents Accessories ........................................ 10 Features .............................................. 11 Quick Guide ........................................ 12 Recording (Basic) Preparation Before using [1] Parts identification and handling.......................................... 16 Remote control ................................ 20 Setup [1] Power supply ................................. Charging the battery ...............
HDCSD100P-VQT1T64_ENG.book 9 ページ ２００８年７月１４日 月曜日 Playback With a PC Playback Before using [1] Motion picture playback ............... Creating still picture from motion picture .................................. Playing back motion pictures by date............................................. Intelligent scene selection ............... Repeat playback.............................. Resuming the previous playback..... [2] Still picture playback..................... Playing back still pictures by date...
HDCSD100P-VQT1T64_ENG.book 10 ページ ２００８年７月１４日 月曜日 午後８時２分 Accessories Check the accessories before using this unit.
HDCSD100P-VQT1T64_ENG.book 11 ページ ２００８年７月１４日 月曜日 午後８時２分 Features ∫ Very clear high definition pictures This unit can record detailed high definition images to an SD card.
HDCSD100P-VQT1T64_ENG.book 12 ページ ２００８年７月１４日 月曜日 午後８時２分 Quick Guide ∫ Charging the battery ∫ Inserting/removing an SD card Charging lamp [CHARGE] A Lights up: Charging Goes off: Charging completed 1) Connect the AC cable to the AC adaptor and the AC outlet. 2) Insert the battery into the battery charger by aligning the arrows. ∫ Inserting the battery Install the battery by inserting it in the direction shown in the figure. A Insert the battery until it clicks and locks.
HDCSD100P-VQT1T64_ENG.book 13 ページ ２００８年７月１４日 月曜日 午後８時２分 ∫ Language selection ∫ Recording motion pictures 1) Press the MENU button, then select [LANGUAGE] and press the cursor button. 2) Select [English] and press the cursor button. 1) Rotate the mode dial to select . 2) Set the LCD/EVF select switch to LCD or EVF. ≥ Open the LCD monitor when it is set to LCD. 3) Press the recording start/stop button to start recording. ∫ Help mode The help mode explains the operation icons displayed.
HDCSD100P-VQT1T64_ENG.book 14 ページ ２００８年７月１４日 月曜日 午後８時２分 ∫ Motion picture playback ∫ Still picture playback 1) Rotate the mode dial to select . 2) Select [ ] (motion picture playback) A with the cursor button. 1) Rotate the mode dial to select . 2) Select [ ] (still picture playback) A with the cursor button. 3) Select the scene to be played back and press the cursor button. 3) Select the still picture to be played back and press the cursor button.
HDCSD100P-VQT1T64_ENG.
HDCSD100P-VQT1T64_ENG.book 16 ページ Before using 1 ２００８年７月１４日 月曜日 午後８時２分 Parts identification and handling 3 45 6 7 8 9 2 10 1 11 20 19 16 17 18 AV/ 1 LCD monitor open 2 LCD monitor (l 35) Pull the LCD monitor out in the direction of the arrow with your fingers. 14 15 12 13 Due to limitations in LCD production technology, there may be some tiny bright or dark spots on the LCD monitor screen. However, this is not a malfunction and does not affect the recorded picture.
HDCSD100P-VQT1T64_ENG.book 17 ページ ２００８年７月１４日 7 8 9 10 11 12 13 14 Intelligent auto button [iA] (l 51) PRE-REC button [PRE-REC] (l 45) Menu button [MENU] (l 29) Battery holder (l 23) DC input terminal [DC IN] (l 25) USB terminal [ ] (l 96, 105, 115) HDMI mini connector [HDMI] (l 88, 93) Audio-video/headphone output terminal [AV/ ] (l 31, 56, 88, 104) ≥ Use the AV cable (only the supplied cable) or headphones. ≥ Setup the [AV JACK] in the menu when the headphones are used.
HDCSD100P-VQT1T64_ENG.book 18 ページ ２００８年７月１４日 37 38 月曜日 39 午後８時２分 40 36 35 34 33 32 31 42 31 32 33 34 35 Mode dial (l 28) Recording start/stop button (l 41) Status indicator (l 28) LCD/EVF select switch [EVF/LCD] (l 35) Viewfinder (l 35) 41 39 Accessory shoe ≥ The video DC light/VW-LDC103PP (optional) should be mounted here. Due to limitations in LCD production technology, there may be some tiny bright or dark spots on the viewfinder screen.
HDCSD100P-VQT1T64_ENG.book 19 ページ ２００８年７月１４日 月曜日 午後８時２分 41 Grip belt Adjust the length of the grip belt so that it fits your hand. 1 2 3 42 Flip the belt. Adjust the length. Replace the belt. Shoulder strap fixture 43 44 43 Battery release lever [BATTERY] (l 23) 44 Tripod receptacle This is a hole for attaching the unit to the optional tripod. (For details on mounting the tripod, refer to the operating instructions for the tripod.
HDCSD100P-VQT1T64_ENG.book 20 ページ ２００８年７月１４日 Remote control 1 2 3 PHOTO EXT DISPLAY SHOT DATE/ TIME 5 6 While pressing the stopper A, pull out the battery holder. 2 Set the buttontype battery with its (i) mark facing upward and then put the battery holder back in place.
HDCSD100P-VQT1T64_ENG.book 21 ページ ２００８年７月１４日 月曜日 午後８時２分 ∫ Remote control usable range A Remote control sensor Distance: Within approx. 5 m (16 feet) Angle: Approx. 10o up and 15o down, left, and right ≥ The remote control is intended for indoor operation. Outdoors or under strong light, the unit may not operate properly even within the usable ranges.
HDCSD100P-VQT1T64_ENG.book 22 ページ Setup 1 ２００８年７月１４日 月曜日 午後８時２分 Power supply ∫ About batteries that you can use with this unit The Panasonic battery that can be used with this unit is VW-VBG130/VW-VBG260/VW-VBG6. VW-VBG130/VW-VBG260/VW-VBG6 come with a function to check whether the battery and unit can be safely used together. ≥ To use the VW-VBG6 for this unit, the battery pack holder kit VW-VH04 (optional) is required.
HDCSD100P-VQT1T64_ENG.book 23 ページ ２００８年７月１４日 月曜日 午後８時２分 ≥ We recommend using Panasonic batteries (l 10, 24, 143). ≥ If you use other batteries, we cannot guarantee the quality of this product. ≥ Do not heat or expose to flame. ≥ Do not leave the battery(ies) in an automobile exposed to direct sunlight for a long period of time with doors and windows closed. Inserting/removing the battery Install the battery by inserting it in the direction shown in the figure.
HDCSD100P-VQT1T64_ENG.
HDCSD100P-VQT1T64_ENG.book 25 ページ ２００８年７月１４日 月曜日 午後８時２分 Connecting to the AC outlet Important: While the DC cable is connected to the AC adaptor, the battery will not charge. ≥ Do not use the AC cable with any other equipment as it is designed only for this unit. Do not use the AC cable from other equipment with this unit. DC IN A DC output terminal B DC input terminal Insert the DC cable so the [ terminal.
HDCSD100P-VQT1T64_ENG.book 26 ページ Setup 2 ２００８年７月１４日 月曜日 午後８時２分 Preparation of SD cards This unit (an SDHC compatible device) is compatible with both SD Memory Cards and SDHC Memory Cards. You cannot use SDHC Memory Cards on devices that are only compatible with SD Memory Cards. When using an SDHC Memory Card on another device, confirm that the device supports the SDHC Memory Card.
HDCSD100P-VQT1T64_ENG.book 27 ページ ２００８年７月１４日 月曜日 午後８時２分 Inserting/removing an SD card When using an SD card not from Panasonic, or one previously used on other equipment, for the first time on this unit, format the SD card. (l 87) When the SD card is formatted, all of the recorded data is deleted. Once the data is deleted, it cannot be restored. Copy valuable data onto a PC, DVD disc etc. before proceeding with the formatting.
HDCSD100P-VQT1T64_ENG.book 28 ページ 3 Setup ２００８年７月１４日 月曜日 午後８時２分 Selecting a mode (Turning the unit on/off) Rotate the mode dial to switch to recording, playback or power OFF. Turn on the power by turning the mode dial to lock release button A. or while pressing the ≥ Rotate the mode dial while at the same time pressing in the lock release button if changing from OFF to another mode. ≥ Status indicator B ≥ Align with the mark C. The status indicator lights and the power turns on.
HDCSD100P-VQT1T64_ENG.book 29 ページ Setup 4 ２００８年７月１４日 月曜日 午後８時２分 Using the menu screen Operate the displayed menu screens with the cursor button. MENU 1 Press the MENU button. ≥ Descriptions of submenus and current settings on menus are displayed scrolling at the bottom of the screen. MENU ≥ The menu displayed differs depending on the position of the mode dial. 2 4 Select the desired setting and press the cursor button to enter the selection.
HDCSD100P-VQT1T64_ENG.book 30 ページ ２００８年７月１４日 月曜日 午後８時２分 Language selection You can select the language on the screen display and the menu screen. 1 Press the MENU button, then select [LANGUAGE] and press the cursor button. 2 Select [English] and press the cursor button. Menu list Recording mode *1 It is not displayed when the AUTO/MANUAL switch is set to AUTO. *2 It is not displayed when the Intelligent auto mode is [ON]. Part of the menu will not be used depending on the used functions.
HDCSD100P-VQT1T64_ENG.book 31 ページ ２００８年７月１４日 ∫ [SETUP] [CLOCK SET] (l 33) [DISPLAY] The screen indications are selected as shown in the illustration below. [OFF] [ON] 1h30m R 1h20m NOV 15 2008 NOV 15 2008 [DATE/TIME] (l 33) [DATE FORMAT] (l 33) [POWER SAVE] [OFF]: The power saving function is not activated. [5 MINUTES]: When about 5 minutes have passed without any operation, this unit automatically turns off to save battery life.
HDCSD100P-VQT1T64_ENG.book 32 ページ ２００８年７月１４日 月曜日 午後８時２分 Playback mode *1 When the disc playback tab [ ] is selected while a DVD burner (optional) is connected, or when [INTEL. SCENE] (l 78) is selected, this does not appear. *2 Only when the disc playback tab [ ] is selected while a DVD burner (optional) is connected, this appears.
HDCSD100P-VQT1T64_ENG.book 33 ページ Setup 5 ２００８年７月１４日 月曜日 午後８時２分 Setting date and time When the unit is turned on for the first time, a message asking you to set the date and time will appear. Select [YES] and perform steps 2 to 3 below to set the date and time. ¬ Rotate the mode dial to select 1 . [DATE] [D/T] Select the menu. (l 29) [SETUP] # [CLOCK SET] # [YES] NOV 15 2008 NOV 15 2008 12:34PM [OFF] 2 Select the date or time to be set, then set the desired value with the cursor button.
HDCSD100P-VQT1T64_ENG.book 34 ページ ２００８年７月１４日 月曜日 午後８時２分 World time setting (Displaying the time of the travel destination) It is possible to display and record the time at the travel destination by selecting your home region and the travel destination. 1 Select the menu. (l 29) [BASIC] # [SET WORLD TIME] # [YES] ≥ If the clock is not set, adjust the clock to the current time. (l 33) ≥ When the [HOME] (your home region) is not set, such as the time for the initial settings, the message appears.
HDCSD100P-VQT1T64_ENG.book 35 ページ Setup 6 ２００８年７月１４日 月曜日 午後８時２分 Adjusting LCD monitor/ viewfinder ≥ These settings will not affect the images actually recorded. ≥ When the [POWER LCD] or [LCD SET] is set, set the LCD/EVF select switch to LCD. When the [EVF SET] is set or the viewfinder field of view is corrected, set the LCD/EVF select switch to EVF.
HDCSD100P-VQT1T64_ENG.book 36 ページ ２００８年７月１４日 Adjusting the viewfinder field of view Adjust the focus by rotating the eyepiece corrector dial. Recording showing the contents to a partner ¬ Rotate the mode dial to select . Rotate the LCD monitor towards the lens side. ≥ Both the LCD monitor and the viewfinder are turned on during the face-to-face recording regardless of the position of the LCD/EVF select switch. ≥ The image is horizontally flipped as if you see a mirror image.
HDCSD100P-VQT1T64_ENG.
HDCSD100P-VQT1T64_ENG.book 38 ページ Recording (Basic) 1 ２００８年７月１４日 月曜日 午後８時２分 Before recording ∫ Basic camera positioning ≥ When you are outdoors, record pictures with the sunlight behind you. If the subject is backlit, it will become dark in the recording. ≥ When recording, make sure your footing is stable and there is no danger of colliding with another person or object. 1 Hold the unit with both hands. 2 Put your hand through the grip belt. 3 Do not cover the microphones A.
HDCSD100P-VQT1T64_ENG.book 39 ページ ２００８年７月１４日 About auto mode AUTO MANUAL FOCUS/ZOOM Color balance (white balance) and focusing are adjusted automatically. Depending on the brightness of the subject etc., the aperture and shutter speed are automatically adjusted for an optimum brightness. (The shutter speed is adjusted to a maximum of 1/250 in recording mode.
HDCSD100P-VQT1T64_ENG.book 40 ページ ２００８年７月１４日 Quick start This unit will resume recording pause mode about 0.6 seconds after the LCD monitor is reopened. ≥ When in quick start standby mode about 60% of the power used in recording pause mode is being consumed, so the recording time will be reduced. ¬ Rotate the mode dial to select . 1 Set the LCD/EVF select switch to LCD. (l 35) 2 Select the menu. (l 29) [SETUP] # [QUICK START] # [ON] 3 Close the LCD monitor while the mode dial is set to .
HDCSD100P-VQT1T64_ENG.book 41 ページ Recording (Basic) 2 ２００８年７月１４日 月曜日 午後８時２分 Recording motion pictures This unit records high definition images that are compatible with the AVCHD format on an SD card. Sound is recorded with the Dolby Digital 5.1 Creator. Use an SD card that can be used for motion picture recording. (l 26) ≥ Rotate the mode dial while at the same time pressing in the lock release button A if changing from OFF to another mode. ≥ Align with the mark B.
HDCSD100P-VQT1T64_ENG.book 42 ページ ２００８年７月１４日 月曜日 午後８時２分 About the compatibility of the recorded motion pictures ≥ They are not compatible with devices other than those that support AVCHD. Images cannot be played with equipment that does not support AVCHD (ordinary DVD recorders). Confirm that your equipment supports AVCHD by referring to the operating instructions. ≥ There are some cases where the recorded motion pictures cannot be played back, even if the device supports AVCHD.
HDCSD100P-VQT1T64_ENG.book 43 ページ ２００８年７月１４日 ∫ Screen indications in the recording mode 0h00m00s HG R 1h20m 月曜日 午後８時２分 A Recording mode B Remaining time left for recording (When the remaining time is less than 1 minute, [R 0h00m] flashes red.) C Recording time elapsed Each time the unit is put into recording pause, the counter display will be reset to “0h00m00s”. When motion picture recording stops suddenly For some SD cards, the message appears suddenly, and recording stops.
HDCSD100P-VQT1T64_ENG.book 44 ページ ２００８年７月１４日 月曜日 午後８時２分 Recording modes/approximate recordable time Switch the picture quality of the motion pictures to be recorded. Select the menu.
HDCSD100P-VQT1T64_ENG.book 45 ページ ２００８年７月１４日 PRE-REC This prevents you from missing a shot. This allows recording of the pictures and sound to start approximately 3 seconds before the recording start/stop button is pressed. 1 Press the PRE-REC button. PRE-REC 月曜日 午後８時２分 ≥ The image when pressing the recording start/ stop button appears in thumbnail view, and it is different from the image when starting playback. Shooting guide Message is displayed when this unit is moved rapidly. Select the menu.
HDCSD100P-VQT1T64_ENG.book 46 ページ Recording (Basic) 3 ２００８年７月１４日 月曜日 午後８時２分 Recording still pictures The number of pixels recorded for still pictures is [ 2.1M 1920k1080] (16:9). Still pictures can also be recorded while recording motion pictures. ≥ Rotate the mode dial while at the same time pressing in the lock release button A if changing from OFF to another mode. ≥ Align with the mark B. 1 Rotate the mode dial to select . 2 Set the LCD/EVF select switch to LCD or EVF.
HDCSD100P-VQT1T64_ENG.book 47 ページ 4 Press the ２００８年７月１４日 button fully. 月曜日 午後８時２分 ∫ About the screen indications when the button is pressed ≥ In order to take better still pictures, the screen will brighten when the button is fully pressed. To record still pictures clearly ≥ While recording motion pictures or during the PRE-REC operation, the following arrangements are applied so that motion picture recording takes preference over still picture recording.
HDCSD100P-VQT1T64_ENG.book 48 ページ ２００８年７月１４日 ∫ About the focus indication ≥ The focus indication indicates the status of the auto focus. ≥ The focus indication does not appear in manual focus mode. ≥ You can record still pictures even if the focus indication does not appear, but pictures may be recorded without being focused. ≥ The focus indication does not appear or has difficulty focusing in the following cases. jWhen the zoom magnification is high. jWhen the unit is shaken. jWhen the subject is moving.
HDCSD100P-VQT1T64_ENG.book 49 ページ 4 Recording (Basic) ２００８年７月１４日 午後８時２分 Zoom in/out function The maximum optical zoom ratio is 12k. ¬ Rotate the mode dial to select . VOL W 月曜日 T 1.9 seconds. (The zoom speed does not vary when operating with the remote control.) When the zoom speed is high, the subject may not be focused easily. ≥ Zoom can also be operated using the multi manual ring.
HDCSD100P-VQT1T64_ENG.book 50 ページ Recording (Basic) 5 ２００８年７月１４日 月曜日 午後８時２分 Optical image stabilizer function Optical image stabilizer can stabilize the image without decreasing the image quality as much. ¬ Rotate the mode dial to select . O.I.S. Optical image stabilizer button Press this button to switch on/off the image stabilizer function. ≥[ ] appears on the screen. O.I.S.: Optical Image Stabilizer ≥ This function’s default setting is [ON].
HDCSD100P-VQT1T64_ENG.book 51 ページ 6 Recording (Basic) ２００８年７月１４日 月曜日 午後８時２分 Intelligent auto mode It will make an optimal setting automatically depending on the objects and recording conditions. ¬ Set the mode dial to , and set the AUTO/MANUAL switch to AUTO. (l 39) AUTO Intelligent auto button Press this button to switch on/off the Intelligent auto mode. MANUAL FOCUS/ZOOM It is automatically set to the following modes depending on the objects and recording conditions.
HDCSD100P-VQT1T64_ENG.book 52 ページ Recording (Advanced) 1 ２００８年７月１４日 月曜日 午後８時２分 Recording functions of operation icons Select the operation icons to add different effects to the images to be recorded. ¬ Rotate the mode dial to select 1 . Press the cursor button, and icons will be displayed on the screen. ≥ The indication changes each time the cursor button is moved down. ≥ The operation icon appears or disappears each time the cursor button is pressed. 2 (e.g.
HDCSD100P-VQT1T64_ENG.book 53 ページ Tele macro*1 ２００８年７月１４日 月曜日 午後８時２分 Headphone volume adjustment*3 *1 It is not displayed while recording. *2 It is not displayed when the Intelligent auto mode is [ON]. *3 It is displayed only when [AV JACK] is set to [HEADPHONE]. ≥ If you turn off the power or set the mode dial to , Help mode, MagicPix, Backlight compensation, self timer and tele macro functions are canceled. ≥ If you turn off the power, the fade function is canceled.
HDCSD100P-VQT1T64_ENG.book 54 ページ Function Self-timer ２００８年７月１４日 月曜日 午後８時２分 Effect This is for recording still pictures using the timer. Each time the [ ] icon is selected, the indication changes by one setting in the following order: [Ø10] # [Ø2] # setting canceled Ø10: Records after 10 seconds Ø2: Records after 2 seconds ≥ When the button is pressed, a still picture is recorded after the [Ø10] or [Ø2] display and the recording lamp flashes for the time which has been set.
HDCSD100P-VQT1T64_ENG.book 55 ページ Function Automatic face detection ２００８年７月１４日 月曜日 午後８時２分 Effect Brightness, quality, and focus are adjusted automatically so the face will be recorded clearly by detecting the face when it is recorded in the dark, such as when the light is shining from behind the objects. In the Automatic face detection mode, detected faces appear with frames. ≥ Up to 15 frames are indicated. Larger faces and faces nearer to the center of the screen take preference over others.
HDCSD100P-VQT1T64_ENG.book 56 ページ ２００８年７月１４日 Function Headphone volume adjustment Adjusts the volume of the headphone while recording. :Increases the volume :Decreases the volume ≥ Actual volume to be recorded does not change. Help mode: ≥ When the help mode is used, functions cannot be set. ≥ When the help mode is used, motion pictures and still pictures cannot be recorded.
HDCSD100P-VQT1T64_ENG.book 57 ページ ２００８年７月１４日 月曜日 午後８時２分 Soft skin mode: ≥ If the background or anything else in the scene has colors similar to the skin color, they will also be smoothed. ≥ If the brightness is insufficient, the effect may not be clear. ≥ If you record a person in the distance, the face may not be recorded clearly. In this case, cancel soft skin mode or zoom in on the face (close-up) to record. MagicPix: ≥ Recorded scene is seen as if frames were missed.
HDCSD100P-VQT1T64_ENG.book 58 ページ Recording (Advanced) 2 ２００８年７月１４日 月曜日 午後８時２分 Recording functions of menus ¬ Rotate the mode dial to select . ≥ Set to [OFF] when the menus are not used. Function Guide line Effect/Setting method You can check if the image is level while recording or playing back motion pictures and still pictures. The function can also be used to estimate the balance of the composition. A [HORIZONTAL] B [GRID1] C [GRID2] ≥ The Intelligent auto mode is set to [OFF].
HDCSD100P-VQT1T64_ENG.book 59 ページ Function Microphone setup [SURROUND]: Sound is recorded with 5.1 ch surround microphone. [ZOOM MIC]: Directivity of the microphone is synchronized with the zoom operation. Sounds near the front of the unit are recorded more clearly if you zoom in (close-up) and surrounding sounds are recorded more realistically if you zoom out (wide angle). [FOCUS MIC]: Directivity of the center is enhanced for recording audio near the front of the unit more clearly.
HDCSD100P-VQT1T64_ENG.book 60 ページ ２００８年７月１４日 Function HD hi-speed burst shooting 月曜日 午後８時２分 Effect/Setting method 72 still pictures are recorded at a rate of 24 per second. Use this function to record an object with fast movement. ≥ The Intelligent auto mode is set to [OFF]. (l 51) 1 Select the menu. (l 29) [RECORD SETUP] # [HI-SPEED BURST] # [ON] 2 Press the button. ≥ Up to 72 still pictures can be taken in burst mode. ([ red during recording.
HDCSD100P-VQT1T64_ENG.book 61 ページ Function Built-in flash ２００８年７月１４日 月曜日 午後８時２分 Effect/Setting method When the button is pressed, the flash is activated and the picture will be recorded. Use the built-in flash in order to record still pictures in dark places. Select the menu. (l 29) [RECORD SETUP] # [FLASH] # [AUTO] or [ON] ≥ This function’s default setting is [AUTO]. ≥ When the button is pressed halfway, the flash indicator will appear in the bottom left corner of the screen.
HDCSD100P-VQT1T64_ENG.book 62 ページ ２００８年７月１４日 Function Digital cinema color 月曜日 午後８時２分 Effect/Setting method Recording motion pictures with more vivid colors, using x.v.Color™ technology. Select the menu. (l 29) [ADVANCED] # [Digital Cinema Color] # [ON] ≥ For more realistic colors, use an HDMI mini cable with a TV that supports the x.v.Color™. 24p digital cinema: ≥ [Digital Cinema Color] is turned [ON] and is not changeable.
HDCSD100P-VQT1T64_ENG.book 63 ページ ２００８年７月１４日 月曜日 午後８時２分 Red eye reduction: ≥ The flash is activated 2 times. Do not move until the second flash is finished. ≥ Red eye phenomenon may appear depending on the recording conditions. Auto slow shutter: ≥ If the scene is low in brightness or contrast, the subject may not be focused in on. ≥ When the shutter speed becomes 1/30, the screen may be seen as if frames are missed and afterimages may appear.
HDCSD100P-VQT1T64_ENG.book 64 ページ Recording (Advanced) 3 ２００８年７月１４日 月曜日 午後８時２分 Recording manually by setting the menu ¬ Rotate the mode dial to select . Set the AUTO/MANUAL switch to MANUAL. [ MNL ] appears on the screen. AUTO MANUAL FOCUS/ZOOM Scene mode When you record images in different situations, this mode automatically sets optimum shutter speeds and apertures. Select the menu.
HDCSD100P-VQT1T64_ENG.book 65 ページ ２００８年７月１４日 Sports mode ≥ For slow-motion playback or playback pause of recorded pictures, this mode helps diminish camera shake. ≥ During normal playback, the image movement may not look smooth. ≥ Color or brightness of the screen might change under fluorescent light, mercury light or sodium light, etc. ≥ You may see a band of light around an object that is shining very bright, or highly reflective. ≥ If the brightness is insufficient, the sports mode does not function.
HDCSD100P-VQT1T64_ENG.book 66 ページ ２００８年７月１４日 月曜日 午後８時２分 Microphone level When recording, the input level from the built-in microphones and the external microphone terminal can be adjusted. ≥ Set the AUTO/MANUAL switch to MANUAL. (l 64) 1 Select the menu. (l 29) [RECORD SETUP] # [MIC LEVEL] # [SETr ] or [SET] ≥ Set to [AUTO] to return to normal setting. [AUTO]: AGC is activated, and the recording level is adjusted automatically. [SETr ]: The desired recording level can be set.
HDCSD100P-VQT1T64_ENG.book 67 ページ ２００８年７月１４日 月曜日 午後８時２分 Picture adjustment Adjust the quality of the image while recording. Adjust by outputting to a TV while adjusting the quality of the image. ≥ Set the AUTO/MANUAL switch to MANUAL. (l 64) 1 Select the menu. (l 29) [ADVANCED] # [PICTURE ADJUST] # [YES] 2 3 Adjust the settings with the cursor button. Select the item with the cursor button and press the cursor button.
HDCSD100P-VQT1T64_ENG.book 68 ページ ２００８年７月１４日 月曜日 午後８時２分 Luminance Displays the luminance level of the center of the screen (luminance display frame) in %. It makes the adjustment of the brightness of the object easier, by checking the luminance level of the object, when recording same object in different surroundings. Adjust the brightness using [IRIS]. (l 72) ≥ Set the AUTO/MANUAL switch to MANUAL. (l 64) Select the menu.
HDCSD100P-VQT1T64_ENG.book 69 ページ Recording (Advanced) 4 ２００８年７月１４日 月曜日 午後８時２分 Recording manually using the multi manual ring Perform zoom operation, focus, white balance, shutter speed, and iris adjustments using the multi manual ring. ¬ Rotate the mode dial to select . Set the AUTO/MANUAL switch to MANUAL.
HDCSD100P-VQT1T64_ENG.book 70 ページ ２００８年７月１４日 月曜日 午後８時２分 Zoom operation Zoom operation can be done using the multi manual ring. ≥ Move the AUTO/MANUAL switch from the MANUAL to FOCUS/ZOOM position, and display [ ]. (l 69) A side: Zoom by rotating the ring. Close-up recording (zoom in) A B side: Wide-angle recording (zoom out) ≥ The zoom speed varies depending on the B speed to rotate the ring. ≥ Auto focus is on when [ ] is displayed.
HDCSD100P-VQT1T64_ENG.book 71 ページ ２００８年７月１４日 月曜日 午後８時２分 White balance The automatic white balance function may not reproduce natural colors depending on the scenes or lighting conditions. If so, you can adjust the white balance manually. ≥ Set the AUTO/MANUAL switch to MANUAL. (l 64) 1 Press the camera function button and select [WHITE BALANCE] by rotating the ring. (l 69) CAM FUNC 2 Enter the selection by pressing the camera function button. 3 Select the white balance mode by rotating the ring.
HDCSD100P-VQT1T64_ENG.book 72 ページ ２００８年７月１４日 月曜日 午後８時２分 Manual shutter speed/iris adjustment Shutter Speed: Adjust it when recording fast-moving subjects. Iris: Adjust it when the screen is too bright or too dark. ≥ Set the AUTO/MANUAL switch to MANUAL. (l 64) 1 Press the camera function button and select [SHUTTER SPEED] or [IRIS] by rotating the ring. (l 69) CAM FUNC 2 3 Enter the selection by pressing the camera function button. Adjust by rotating the ring.
HDCSD100P-VQT1T64_ENG.
HDCSD100P-VQT1T64_ENG.book 74 ページ Playback 1 ２００８年７月１４日 月曜日 午後８時２分 Motion picture playback A Lock release button B Align with the mark. ≥ Rotate the mode dial while at the same time pressing in the lock release button if changing from OFF to another mode. 1 Rotate the mode dial to select . 2 Select [ ] (motion picture playback) with the cursor button. C Motion picture playback 74 VQT1T64 3 Select the scene to be played back and press the cursor button.
HDCSD100P-VQT1T64_ENG.book 75 ページ ２００８年７月１４日 ≥ The scene number display switches to the page number, except when thumbnails are selected. ≥ Press the cursor button while selecting the play mode select button to switch to the thumbnails of the following scenes.
HDCSD100P-VQT1T64_ENG.book 76 ページ ２００８年７月１４日 ∫ Slow-motion playback 1 2 Pause the playback. Move and hold the cursor button right. (Move and hold the cursor button left to play back slow-motion pictures in reverse.) It will playback in slow-motion while moving the cursor button. ≥ Normal playback is restored when you move the cursor button up. ≥ When slow-motion pictures are played back in reverse, they will be shown continuously at approximately 2/3rd the speed of normal playback (intervals of 0.
HDCSD100P-VQT1T64_ENG.book 77 ページ ２００８年７月１４日 Creating still picture from motion picture A single frame from the recorded motion picture can be saved as a still picture. 1 Pause at the scene you want to save as a still picture during playback. ≥ It is convenient to use slow-motion playback and frame-by-frame playback. 2 Press the 月曜日 午後８時２分 The scenes recorded on the date selected are displayed as thumbnails. ≥ Move the cursor button up or down to select the playback date.
HDCSD100P-VQT1T64_ENG.book 78 ページ ２００８年７月１４日 Intelligent scene selection (Extracting parts recorded clearly to play back) Motion pictures are played back after excepting some parts that may not have been recorded clearly such as image shaking or out-of-focus scenes. 1 月曜日 午後８時２分 ≥ Divided scene will not be skipped. ≥ Playing back all the scenes returns if the power is turned off or the mode dial is operated. ≥ For data that are edited with the easy editing function of HD Writer 2.
HDCSD100P-VQT1T64_ENG.book 79 ページ Playback 2 ２００８年７月１４日 月曜日 午後８時２分 Still picture playback A Lock release button B Align with the mark. ≥ Rotate the mode dial while at the same time pressing in the lock release button if changing from OFF to another mode. 1 Rotate the mode dial to select . 2 Select [ ] (still picture playback) with the cursor button. 3 Select the still picture to be played back and press the cursor button.
HDCSD100P-VQT1T64_ENG.book 80 ページ ２００８年７月１４日 ≥ The picture number display switches to the page number, except when thumbnails are selected. ≥ Select the play mode select button and press the cursor button to switch the following picture displays to thumbnail view. (All scenes): Playback of all still pictures (By date): Playback of still pictures recorded on a selected date (l 81) 4 Select the playback operation with the cursor button.
HDCSD100P-VQT1T64_ENG.book 81 ページ ２００８年７月１４日 Playing back still pictures by date Still pictures recorded on the same day can be played back in succession. 1 Select (By date), then press the cursor button. 2 Select the playback date, then press the cursor button. 月曜日 午後８時２分 ≥ Even if still pictures are recorded on the same day, they are grouped separately in the following cases.
HDCSD100P-VQT1T64_ENG.book 82 ページ 1 Editing ２００８年７月１４日 月曜日 午後８時２分 Deleting scenes/still pictures Deleted scenes/still pictures cannot be restored, so perform appropriate confirmation of the contents before proceeding with delete. ¬ Rotate the mode dial to select . To delete by confirming images being played back 0h00m00s Press the button while scenes or still pictures to be deleted are being played back. ≥ When the confirmation message appears, select [YES], then press the cursor button.
HDCSD100P-VQT1T64_ENG.book 83 ページ ２００８年７月１４日 月曜日 午後８時２分 When you stop deleting halfway Press the MENU button while deleting. ≥ The scenes or still pictures that have already been deleted when the deletion is canceled cannot be restored. To complete editing Press the MENU button. ≥ You can also delete scenes by pressing the MENU button, selecting [EDIT SCENE] # [DELETE] # [ALL SCENES] or [SELECT]. ≥ You can also delete still pictures by pressing the MENU button, selecting [PICT.
HDCSD100P-VQT1T64_ENG.book 84 ページ Editing 2 ２００８年７月１４日 月曜日 午後８時２分 Dividing a scene to delete To delete an unnecessary portion of a scene, first divide the scene and then delete the unnecessary portion. ¬ Select [ 1 ] (motion picture playback) while the mode dial is set to Select the menu. (l 29) [EDIT SCENE] # [DIVIDE] # [SET] 2 Select the scene to be divided, then press the cursor button. . (l 74) To continue dividing other scenes Repeat steps 2-3 before completing dividing in step 4.
HDCSD100P-VQT1T64_ENG.book 85 ページ Editing 3 ２００８年７月１４日 月曜日 午後８時２分 Protecting scenes/still pictures Scenes/still pictures can be protected so that they are not deleted by mistake. (Even if you protect some scenes/still pictures on an SD card, formatting the SD card will delete them.) ¬ Rotate the mode dial to select 1 . Select the menu. (l 29) [VIDEO SETUP] or [PICT. SETUP]# [SCENE PROTECT] # [YES] 2 Select the scene/still picture to be protected and then press the cursor button.
HDCSD100P-VQT1T64_ENG.book 86 ページ Editing 4 ２００８年７月１４日 月曜日 午後８時２分 DPOF setting You can write the data selecting still pictures to be printed and the number of prints (DPOF data) onto the SD card.
HDCSD100P-VQT1T64_ENG.book 87 ページ Editing 5 ２００８年７月１４日 月曜日 午後８時２分 SD card management Formatting Please be aware that if an SD card is formatted, then all the data recorded on the card will be erased. Back up important data on a PC, DVD disc etc. Select the menu. (l 29) ≥ When the confirmation message appears, select [YES], then press the cursor button. ≥ When formatting is complete, press the MENU button to exit the message screen.
HDCSD100P-VQT1T64_ENG.book 88 ページ With a TV 1 ２００８年７月１４日 月曜日 午後８時２分 Watching Video/Pictures on your TV The motion pictures and still pictures recorded on this unit can be played back on a TV screen. Confirm the terminals on your TV and use a cable compatible with the terminals. Image quality may vary with the connected terminals. 1 High quality 2 HDMI terminal 3 Component terminal 4 Video terminal ≥ Use the AC adaptor to free you from worrying about the battery running down.
HDCSD100P-VQT1T64_ENG.book 89 ページ ２００８年７月１４日 月曜日 午後８時２分 ≥ Check that the plugs are inserted as far as they go. ≥ We recommend using Panasonic HDMI mini cables (optional). Part numbers: RP-CDHM15 (1.5 m/4.9 feet), RP-CDHM30 (3.0 m/9.8 feet) ≥ Do not use any other component cables except the supplied one. ≥ The component terminal is for outputting images only so be sure to also connect the AV cable. (It is not necessary to connect the yellow plug.) ≥ Do not use any other AV cables except the supplied one.
HDCSD100P-VQT1T64_ENG.book 90 ページ ２００８年７月１４日 月曜日 午後８時２分 ∫ To watch images with a 16:9 aspect ratio on a regular TV (4:3) ∫ To display the on-screen information on the TV When playing back motion pictures or still pictures recorded on this unit with a 16:9 aspect ratio on a TV with a 4:3 aspect ratio, the images on the screen may be squeezed horizontally. In this case, change the menu setting to play back the pictures in the original aspect ratio.
HDCSD100P-VQT1T64_ENG.book 91 ページ ２００８年７月１４日 月曜日 午後８時２分 Connecting with a HDMI mini cable What is HDMI? HDMI is the interface for digital devices. When this unit is connected to a HDMI compatible device, the image and audio can be output with a digital signal. If you connect this unit to a HDMI compatible high definition TV and then play back the recorded high definition images, you can enjoy them in high resolution with high quality sound.
HDCSD100P-VQT1T64_ENG.book 92 ページ ２００８年７月１４日 月曜日 午後８時２分 Listening in 5.1 channel sound You still can listen to the 5.1 channel sound recorded from the internal microphones when this unit is connected to the 5.1 channel compatible AV amplifier or TV using the HDMI mini cable. Please read the AV amplifier and TV operating instructions for how to connect this unit to the AV amplifier and TV.
HDCSD100P-VQT1T64_ENG.book 93 ページ With a TV 2 ２００８年７月１４日 月曜日 午後８時２分 Playback using VIERA Link™ (HDAVI Control™) What is the VIERA Link? ≥ VIERA Link™ is a new name for EZ Sync™. ≥ This function allows you to use your remote control for the Panasonic TV for easy operations when this unit has been connected to a VIERA Link compatible device using a HDMI mini cable (optional) for automatic linked operations. (Not all operations are possible.
HDCSD100P-VQT1T64_ENG.book 94 ページ ２００８年７月１４日 月曜日 午後８時２分 ≥ It is recommended to connect this unit to an HDMI terminal other than the HDMI1 if there are 2 or more HDMI input terminals on the TV. ≥ VIERA Link must be activated on the connected TV. (Read the operating instructions of the TV for how to set etc.) ≥ If you are not using VIERA Link, set [VIERA Link] to [OFF].
HDCSD100P-VQT1T64_ENG.
HDCSD100P-VQT1T64_ENG.book 96 ページ With other products 1 ２００８年７月１４日 月曜日 午後８時２分 Connecting a DVD burner to copy to/play back a disc Motion pictures or still pictures recorded with this unit can be copied to a DVD disc by connecting a DVD burner VW-BN1 (optional) to this unit using a Mini AB USB Connection Cable (supplied with VW-BN1). The copied DVD disc can also be played back. ≥ Please read the operating instructions of the DVD burner for how to use it.
HDCSD100P-VQT1T64_ENG.book 97 ページ 1 ２００８年７月１４日 月曜日 午後８時２分 Connect the AC adaptor (supplied with VW-BN1) to the DVD burner. ≥ You cannot supply power to the DVD burner from this unit. 2 Connect this unit to the AC adaptor and set the mode dial to 3 Connect this unit to the DVD burner with the Mini AB USB Connection Cable (supplied with VW-BN1). . A Mini AB USB Connection Cable (supplied with VW-BN1) B DVD burner (optional) ≥ Insert the plugs as far as they will go.
HDCSD100P-VQT1T64_ENG.book 98 ページ ２００８年７月１４日 月曜日 午後８時２分 Copying to discs Motion pictures are copied as AVCHD format high definition images. ≥ We recommend preparing the necessary number of discs that can be used for copying (l 96), and spare discs. ≥ You cannot copy from multiple SD cards to 1 disc. (You can additionally copy only to a DVD-RAM.) ≥ Motion pictures and still pictures cannot both be copied to a single disc. ≥ Confirm that auto protection is [ON] before copying data.
HDCSD100P-VQT1T64_ENG.book 99 ページ ２００８年７月１４日 step 3) Press the DISC COPY button. Select the date you want to copy and press the cursor button. DISC COPY 6 5 (Only when [SELECT SCENES] is selected in step 3) Select [NEXT] and press the cursor button. 午後８時２分 (Only when [SELECT DATE] is selected in step 3) (Only when [SELECT DATE] is selected in ≥ When the cursor button is pressed again, the selected date will be canceled. ≥ Up to 99 dates can be selected in succession.
HDCSD100P-VQT1T64_ENG.book 100 ページ ２００８年７月１４日 月曜日 午後８時２分 Important Notice ≥ When connecting an optional DVD burner and this unit for copying a disc, do not insert a disc with recorded motion pictures into devices that do not support the AVCHD format. In some cases the disc may get stuck in the device. The disc will not play back on devices that do not support the AVCHD format.
HDCSD100P-VQT1T64_ENG.book 101 ページ ２００８年７月１４日 月曜日 午後８時２分 ∫ To copy the data on a new disc successively after confirming the contents of the copied disc by playing it back Press the DISC COPY button on the playback thumbnail view to display the selection screen in Step 2, so that you can copy data again. DISC COPY ≥ The disc that was copied to can be played back by connecting this unit and a DVD burner.
HDCSD100P-VQT1T64_ENG.book 102 ページ ２００８年７月１４日 月曜日 午後８時２分 Playing back the copied disc ≥ Only discs that have been copied by connecting this unit to the DVD burner or where motion pictures have been recorded in AVCHD format can be played back. It may not be possible to play back discs recorded on other devices. 1 Connect this unit to the DVD burner to prepare for playback. (l 96) ≥ When playing back on a TV, connect this unit to the TV with HDMI mini cable, component cable or AV cable.
HDCSD100P-VQT1T64_ENG.book 103 ページ ２００８年７月１４日 月曜日 午後８時２分 Managing the copied disc (Formatting, Auto protect, Displaying disc information) ≥ Connect this unit to the DVD burner and then select [PLAY DISC]. (l 96) ∫ Formatting discs This is for initializing DVD-RAM and DVD-RW discs. ≥ Select [ ] tab. Please be aware that if a disc is formatted, then all the data recorded on the disc will be erased. Back up important data on a PC etc. Select the menu.
HDCSD100P-VQT1T64_ENG.book 104 ページ With other products 2 ２００８年７月１４日 月曜日 午後８時２分 Dubbing images onto other video device Images played back on this unit can be dubbed onto a DVD recorder or video device. ≥ Images are dubbed in standard quality. ≥ Use the AC adaptor to free you from worrying about the battery running down. Change the video input on the video device and TV that this unit is connected to. AV/ 1 ≥ The channel set will differ depending on the terminal to which the unit is connected.
HDCSD100P-VQT1T64_ENG.book 105 ページ With other products 3 ２００８年７月１４日 月曜日 午後８時２分 With a printer (PictBridge) To print pictures by directly connecting this unit to the printer, use a printer compatible with PictBridge. (Read the operating instructions for the printer.) PictBridge is an industry standard from the Camera & Imaging Products Association (CIPA) for direct printing. It allows images to be printed directly from digital cameras to a printer, without having to connect the camera to a PC.
HDCSD100P-VQT1T64_ENG.book 106 ページ 5 ２００８年７月１４日 Press the MENU button to display the PictBridge menus. 9 月曜日 午後８時２分 Select [PRINT] # [YES] and press the cursor button to print the pictures. MENU 6 Select the date print setting on [DATE PRINT]. ≥ Exit PictBridge by disconnecting the USB cable (supplied) after the pictures have been printed. ≥ If the printer is not capable of date printing, this setting is unavailable. 7 Select the paper size setting on [PAPER SIZE].
HDCSD100P-VQT1T64_ENG.
HDCSD100P-VQT1T64_ENG.book 108 ページ Before using 1 ２００８年７月１４日 午後８時２分 What you can do with a PC Software required CD-ROM (supplied): HD Writer 2.6E for HDC*1 月曜日 Available function Data type Copying data to a PC: A Motion/Still pictures Copying in AVCHD format*2: A Motion/Still pictures B Motion pictures Copying in DVD-Video format*3: B Motion pictures ≥ Converted to conventional standard quality (MPEG2 format).
HDCSD100P-VQT1T64_ENG.book 109 ページ Software required ２００８年７月１４日 月曜日 午後８時２分 Available function Standard Windows picture viewer or a commercially available picture viewer Playing back on a PC Windows Explorer Copying still pictures to a PC (l 116) Data type Still picture Refer to page 118 if using a Macintosh. *1 Refer to the operating instructions of HD Writer 2.6E (PDF file) for details on how to use it. *2 Compatible media are SD card and discs (DVD-RAM, DVD-RW, DVD-R and DVD-R DL).
HDCSD100P-VQT1T64_ENG.book 110 ページ ２００８年７月１４日 月曜日 午後８時２分 End User License Agreement Before opening the CD-ROM package, please read the following. You (“Licensee”) are granted a license for the Software defined in this End User Software Agreement (“Agreement”) on condition that you agree to the terms and conditions of this Agreement. If Licensee does not agree to the terms and conditions of this Agreement, promptly return the Software to Matsushita Electric Industrial Co., Ltd.
HDCSD100P-VQT1T64_ENG.book 111 ページ Before using 2 ２００８年７月１４日 月曜日 午後８時２分 Operating environment ≥ Even if the system requirements mentioned in these operating instructions are fulfilled, some PCs cannot be used. ≥ A CD-ROM drive is necessary to install the supplied software applications. (A compatible DVD writer drive and media are necessary for writing to a DVD.) ≥ Operation is not guaranteed in the following cases.
HDCSD100P-VQT1T64_ENG.book 112 ページ ２００８年７月１４日 月曜日 午後８時２分 Necessary software Windows Vista: DirectX 10 Windows XP/2000: DirectX 9.0c ≥ If you install the software on a PC that is not compatible with DirectX 9.0c, the PC may not work properly. If you are unsure whether or not your PC is compatible, contact the maker of your PC. Sound DirectSound Support Interface USB port [Hi-Speed USB (USB 2.
HDCSD100P-VQT1T64_ENG.book 113 ページ Setup 1 ２００８年７月１４日 月曜日 午後８時２分 Installation When installing the software, log on to your PC as the Administrator (or with a user name with equivalent authorization) or with the user name for a standard user account. (If you do not have authorization to do this, consult your manager.) ≥ Before starting the installation, close all applications that are running. ≥ Do not perform any other operations on your PC while the software is being installed.
HDCSD100P-VQT1T64_ENG.book 114 ページ 5 ２００８年７月１４日 After the installation is complete, restrictions 6 月曜日 午後８時２分 Click [Finish]. are displayed. Check the contents, then close the window. The PC must be rebooted for the application to work. ∫ Uninstalling HD Writer 2.6E Follow the steps below to uninstall any software applications that you no longer require. 1 Select [start] # ([Settings] #) [Control Panel] # [Add or Remove Programs (Applications)] or [Uninstall a program]. 2 Select [HD Writer 2.
HDCSD100P-VQT1T64_ENG.book 115 ページ Setup 2 ２００８年７月１４日 月曜日 午後８時２分 Connection and recognition After the software applications are installed, this unit must be connected to the PC and be correctly recognized by the PC. ≥ Remove the supplied CD-ROM from your PC. A USB cable (supplied) 1 Connect this unit to the AC adaptor. 2 Turn on the unit. ≥ This function is available in all modes. Disconnect the USB cable, before turning this unit off.
HDCSD100P-VQT1T64_ENG.book 116 ページ ２００８年７月１４日 月曜日 午後８時２分 About the PC display When the unit is connected to a PC, it is recognized as an external drive. ≥ [Removable Disk] (Example: ) is displayed in [My Computer (Computer)]. Example folder structure of an SD card: Removable Disk DCIM 100CDPFQ 101CDPFR 102CDPFS MISC PRIVATE AVCHD AVCHDTN BDMV IISVPL We recommend using HD Writer 2.6E to copy or write back motion picture data recorded on an SD card.
HDCSD100P-VQT1T64_ENG.book 117 ページ Using with a PC 1 ２００８年７月１４日 月曜日 午後８時２分 Starting HD Writer 2.6E ≥ When using HD Writer 2.6E on Windows XP/2000, log on to your computer as Administrator (or with a login name equally authorized). If you log on with a login name other than Administrator, you cannot use the applications. ≥ When using HD Writer 2.6E on Windows Vista, log on to your computer as Administrator (or with a login name equally authorized) or with the user name for a standard user account.
HDCSD100P-VQT1T64_ENG.book 118 ページ Using with a PC 2 ２００８年７月１４日 月曜日 午後８時２分 If using Macintosh ≥ HD Writer 2.6E is not available for Macintosh. ∫ Operating environment for the card reader function (mass storage) PC Macintosh OS Mac OS X 10.4 Mac OS X 10.5 CPU PowerPC G5 (1.8 GHz or higher) Intel Core Duo Intel Core Solo RAM 64 MB or more Interface USB port ≥ Even if the system requirements mentioned in these operating instructions are fulfilled, some PCs cannot be used.
HDCSD100P-VQT1T64_ENG.
HDCSD100P-VQT1T64_ENG.
HDCSD100P-VQT1T64_ENG.
HDCSD100P-VQT1T64_ENG.book 122 ページ PictBridge 1 ２００８年７月１４日 When a printer compatible with PictBridge is connected (l 105) DPOF already set (to more than 1) (l 86) Protected motion pictures/still pictures (l 85) 2.1M Number of recording pixels for still pictures (l 48) 1920k1080 The picture size is not displayed for still pictures recorded with other products that have different picture sizes from the sizes shown above.
HDCSD100P-VQT1T64_ENG.book 123 ページ Indications 2 ２００８年７月１４日 月曜日 午後８時２分 Messages Major confirmation/error messages to be indicated on the LCD monitor or the viewfinder in text. CANNOT BE USED DUE TO INCOMPATIBLE DATA. CANNOT RECORD - INCOMPATIBLE CONTROL DATA. The recording format of the SD card is different so it cannot be used. Save the data on the SD card to a PC, then use the SD card after formatting it on this unit. CHECK CARD. This card is not compatible or it cannot be recognized by the unit.
HDCSD100P-VQT1T64_ENG.book 124 ページ ２００８年７月１４日 月曜日 午後８時２分 DISCONNECT USB CABLE. The unit cannot correctly establish the connection to the PC or printer. Disconnect and then reconnect the USB cable. DISCONNECT USB CABLE. You cannot turn off this unit while it is connected to a PC or a DVD burner. About recovery If faulty management information is found when an SD card is accessed, one of the following messages may appear. Be sure to follow directions in the messages.
HDCSD100P-VQT1T64_ENG.book 125 ページ Helpful hints 1 ２００８年７月１４日 月曜日 午後８時２分 Functions that cannot be used simultaneously Some functions in this unit are disabled or cannot be selected due to the unit’s specifications. Functions Motion picture recording Conditions which disable the functions ≥ When the HD hi-speed burst shooting mode is on PRE-REC Microphone setup ≥ An external microphone is used.
HDCSD100P-VQT1T64_ENG.
HDCSD100P-VQT1T64_ENG.book 127 ページ Helpful hints 2 Problem This unit cannot be turned on. This unit does not stay on long enough. Battery runs down quickly. ２００８年７月１４日 月曜日 午後８時２分 Troubleshooting Check points ≥ Charge the battery using the AC adaptor. (l 22) ≥ The battery protection circuit may have operated. Attach the battery to the AC adaptor for 5 to 10 seconds. If the unit still cannot be used, the battery is faulty. ≥ Make sure the LCD monitor is opened.
HDCSD100P-VQT1T64_ENG.book 128 ページ Problem This unit cannot be operated though it is turned on. This unit does not operate normally. ２００８年７月１４日 月曜日 午後８時２分 Check points ≥ The unit will not operate unless the LCD monitor is opened when the LCD/EVF select switch is set to LCD. ≥ Turn on the power again. If normal conditions are not restored yet, remove the battery or AC adaptor, wait about 1 minute and then reconnect the battery or AC adaptor. Then about 1 minute later, turn on the power again.
HDCSD100P-VQT1T64_ENG.book 129 ページ Problem Some playback images are skipped automatically. ２００８年７月１４日 月曜日 午後８時２分 Check points ≥ The playmode is set to Change the playmode to (Intelligent scene selection). (All scenes). (l 78) Scene does not playback to the end. Although this unit is correctly connected to a TV, images cannot be seen. The images are squeezed horizontally. ≥ Please read the operating instructions of your TV and select the channel that matches the input used for the connection.
HDCSD100P-VQT1T64_ENG.book 130 ページ Problem The indication disappears. The screen is frozen. No operation can be performed. ２００８年７月１４日 月曜日 午後８時２分 Check points ≥ No operation can be performed on this unit when it is connected to a PC. ≥ Turn off the power to this unit. If the power cannot be turned off, remove the battery or AC adaptor and then reattach it. Turn on the power again. If normal operation is still not restored, detach the power connected, and contact consumer support.
HDCSD100P-VQT1T64_ENG.book 131 ページ Problem ２００８年７月１４日 月曜日 午後８時２分 Check points VIERA Link does not work. ≥ Connect with a HDMI mini cable (optional). (l 93) ≥ Press the MENU button, then select [SETUP] # [VIERA Link] # [ON] with the cursor button. (l 93) ≥ Depending on HDMI terminal of the TV, the input channel may not switch automatically. In this case, use the remote control for the TV to switch input. (For details on how to switch input, please read the operating instructions for the TV.
HDCSD100P-VQT1T64_ENG.book 132 ページ ２００８年７月１４日 月曜日 午後８時２分 ∫ If scenes do not change smoothly when played back on another device The images may be still for several seconds at the joins between the scenes if the following operations are performed when multiple scenes have been continuously played back using another unit. ≥ Just how smoothly the scenes will be played back depends on the playback unit.
HDCSD100P-VQT1T64_ENG.book 133 ページ ２００８年７月１４日 月曜日 午後８時２分 ∫ When PRE-REC was used for recording 1 Normal recording 2 PRE-REC recording A The picture momentarily stops at the end of the last scene that was recorded normally before PREREC recording. ∫ When the recording mode was changed from HA/HG/HX to HE or from HE to HA/HG/HX A The picture momentarily stops where the scenes switch between HA/HG/HX and HE modes. B Playback is smooth if the same mode is used or the mode is switched among HA, HG and HX.
HDCSD100P-VQT1T64_ENG.book 134 ページ ２００８年７月１４日 月曜日 午後８時２分 ∫ When deleting scenes ∫ Example 1: Deleting scenes midway through a sequence of scenes. 1 Scene to be deleted A The image will be still for several seconds wherever a scene was deleted. B The images of consecutive scenes where they are no deletions are played back smoothly one after another. ∫ Example 2: When recording again after having deleted the last scene. 1 2 A B Scene to be deleted A new scene is recorded here.
HDCSD100P-VQT1T64_ENG.book 135 ページ ２００８年７月１４日 月曜日 午後８時２分 Cautions for use About this unit The unit and the SD card become warm during use. This is not a malfunction. Keep the High Definition Video Camera as far away as possible from electromagnetic equipment (such as microwave ovens, TVs, video games etc.). ≥ If you use the High Definition Video Camera on top of or near a TV, the pictures and sound on the High Definition Video Camera may be disrupted by electromagnetic wave radiation.
HDCSD100P-VQT1T64_ENG.book 136 ページ ２００８年７月１４日 About the battery The battery used in this unit is a rechargeable lithium-ion battery. It is susceptible to humidity and temperature and the effect increases the more the temperature rises or falls. In cold areas, the full charge indication may not appear or the low battery indication may appear about 5 minutes after starting use. At high temperatures, the protection function may be triggered, making it impossible to use the unit.
HDCSD100P-VQT1T64_ENG.book 137 ページ ２００８年７月１４日 LCD monitor/viewfinder ≥ When the LCD monitor gets dirty, wipe it with a dry soft cloth. ≥ In a place with drastic temperature changes, condensation may form on the LCD monitor. Wipe it with soft dry cloth. ≥ When the unit has become very cold, for example due to storage in a cold area, its LCD monitor will be slightly darker than usual immediately after the power is turned on. The normal brightness will be restored when the unit’s internal temperature rises.
HDCSD100P-VQT1T64_ENG.book 138 ページ ２００８年７月１４日 月曜日 午後８時２分 Explanation of terms Automatic white balance White balance adjustment recognizes the color of light and adjusts so the white color will become a purer white. The unit determines the hue of light that comes through the lens, thereby judging the recording condition, and selects the closest hue setting. This is called automatic white balance adjustment.
HDCSD100P-VQT1T64_ENG.book 139 ページ ２００８年７月１４日 月曜日 午後８時２分 Recording a subject behind dirty or dusty window The subject behind the window will not be focused because the focus is on the dirty window. Similarly, when recording something on the opposite side of a road with heavy traffic, a vehicle that happens to pass by may be brought into focus.
HDCSD100P-VQT1T64_ENG.book 140 ページ ２００８年７月１４日 月曜日 午後８時２分 Specifications High Definition Video Camera Information for your safety Power source: Power consumption: DC 9.3 V (When using AC adaptor) DC 7.2 V (When using battery) Recording: 5.7 W Signal system 1080/60i Recording format AVCHD format compliant Image sensor 1/6z 3MOS image sensor Total: 610 Kk3 Effective pixels: Motion picture: 520 Kk3 Still picture: 520 Kk3 Lens Auto Iris, F1.8 to F2.8 Focal length: 2.95 mm to 35.
HDCSD100P-VQT1T64_ENG.book 141 ページ ２００８年７月１４日 月曜日 午後８時２分 HDMI mini connector audio output level 5.1 ch (AC3)/2 ch (Linear PCM) MIC input j70 dBV (Mic sensitivity j50 dB equivalent, 0 dB=1 V/Pa, 1 kHz) (Stereo mini jack) USB Card reader/writer function (No copyright protection support) Hi-Speed USB (USB 2.0), USB terminal Type Mini AB PictBridge-compliant Flash Available range: Approx. 1.0 m to 2.5 m (3.3 feet to 8.2 feet) Dimensions 65 mm (W)k72 mm (H)k138 mm (D) [2.56 q (W)k2.835 q (H)k5.
HDCSD100P-VQT1T64_ENG.book 142 ページ ２００８年７月１４日 月曜日 午後８時２分 Still pictures Recording media SD Memory Card: 8 MB, 16 MB, 32 MB, 64 MB, 128 MB, 256 MB, 512 MB, 1 GB, 2 GB (FAT12 and FAT16 system corresponding) SDHC Memory Card: 4 GB, 6 GB, 8 GB, 12 GB, 16 GB, 32 GB (FAT32 system corresponding) Compression JPEG (Design rule for Camera File system, based on Exif 2.2 standard), DPOF corresponding Picture size 1920k1080 Refer to page 48 for the number of recordable pictures.
HDCSD100P-VQT1T64_ENG.book 143 ページ ２００８年７月１４日 月曜日 午後８時２分 Optional accessories Accessory No.
HDCSD100P-VQT1T64_ENG.book 144 ページ Accessory No.
HDCSD100P-VQT1T64_ENG.book 145 ページ ２００８年７月１４日 月曜日 午後８時２分 Accessory Order Form (For USA Customers) Please photocopy this form when placing an order. 1. Model # 2. Items Ordered Accessory # Description Price Each Quantity Total Price Subtotal Your State & Local Sales Tax Shipping & Handling 6.95 Total Enclosed 3. Method of payment (check one) Check of Money Order enclosed (NO C.O.D.
HDCSD100P-VQT1T64_ENG.book 146 ページ ２００８年７月１４日 月曜日 午後８時２分 Request for Service Notice (USA Only) Please photocopy this form when making a request for service notice, in the unlikely event this product needs service. Request for Service Notice: •Please include your proof of purchase. (Failure to do so will delay your repair.) •To further speed your repair, please provide an explanation of what is wrong with the unit and any symptom it is exhibiting.
HDCSD100P-VQT1T64_ENG.book 147 ページ ２００８年７月１４日 月曜日 午後８時２分 Limited Warranty (For USA Customers) PANASONIC CONSUMER ELECTRONICS COMPANY, DIVISION OF PANASONIC CORPORATION OF NORTH AMERICA One Panasonic Way, Secaucus, New Jersey 07094 PANASONIC PUERTO RICO, INC. Ave. 65 de Infantería, Km. 9.
HDCSD100P-VQT1T64_ENG.book 148 ページ ２００８年７月１４日 月曜日 午後８時２分 Customer Services Directory Service in Canada: As per Servicentre listed in Canadian warranty information on page 149. Obtain Product Information and Operating Assistance; locate your nearest Dealer or Service Center; purchase Parts and Accessories; or make Customer Service and Literature requests by visiting our Web Site at: http://www.panasonic.com/consumersupport or, contact us via the web at: http://www.panasonic.
HDCSD100P-VQT1T64_ENG.book 149 ページ ２００８年７月１４日 月曜日 午後８時２分 Warranty (For Canadian Customers) Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 PANASONIC PRODUCT – LIMITED WARRANTY Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship and agrees to remedy any such defect for a period as stated below from the date of original purchase.
HDCSD100P-VQT1T64_ENG.book 150 ページ ２００８年７月１４日 月曜日 午後８時２分 Index ∫ Numerics ∫G 24p digital cinema . . . . . . . . . . . . . . . . . . . . .58 5.1 channel . . . . . . . . . . . . . . . . . . . . . . . . . .92 Gain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 Grip belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Guide line . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 ∫A AC adaptor . . . . . . . . . . . . . . . . . . . .22, 25, 136 Accessory shoe . . . . . .
HDCSD100P-VQT1T64_ENG.book 151 ページ ２００８年７月１４日 月曜日 午後８時２分 ∫R Recordable time . . . . . . . . . . . . . . . . . . . .24, 44 Recording lamp . . . . . . . . . . . . . . . . . . . . . . .30 Recording modes . . . . . . . . . . . . . . . . . . . . . .44 Recording time elapsed . . . . . . . . . . . . . . . . .43 Recovery . . . . . . . . . . . . . . . . . . . . . . . . . . .124 Red eye reduction . . . . . . . . . . . . . . . . . . . . .61 Remaining number of still pictures . . . . . . . . .
HDCSD100P-VQT1T64_ENG.book 152 ページ ２００８年７月１４日 月曜日 午後８時２分 Spanish Quick Use Guide/Guía española para el uso rápido ∫ Carga de la batería Luz indicadora de carga [CHARGE] A Encendida: Carga en curso Apagada: Carga completada ≥ Gire el selector del modo mientras pulsa al mismo tiempo el botón de desbloqueo si cambia de OFF a otro modo. ≥ Indicador de estado B ≥ Alinee con la marca C. ≥ Para apagar la unidad, coloque el selector del modo en OFF.
HDCSD100P-VQT1T64_ENG.book 153 ページ ２００８年７月１４日 ≥ Coloque el lado de la etiqueta C en la dirección mostrada en la figura y empújela hasta que tope manteniéndola derecha. ≥ Para extraer la tarjeta SD, presione en el centro de la tarjeta SD y luego tire de ella derecho hacia fuera. 4) Cierre firmemente la tapa de la tarjeta SD. ≥ Ciérrela firmemente hasta que dispare. ∫ Selección del idioma 1) Pulse el botón MENU, seleccione [LANGUAGE] y, luego, pulse el botón cursor.
HDCSD100P-VQT1T64_ENG.book 154 ページ ２００８年７月１４日 月曜日 午後８時２分 ∫ Reproducción de películas ∫ Reproducción de fotografías 1) Gire el selector de modo para seleccionar . 2) Seleccione [ ] (reproducción de películas) A usando el botón cursor. 1) Gire el selector de modo para seleccionar . 2) Seleccione [ ] (reproducción de fotografías) A usando el botón cursor. 3) Seleccione la escena a ser reproducida, luego pulse el botón cursor. 3) Seleccione la fotografía a ser reproducida y pulse el botón cursor.
HDCSD100P-VQT1T64_ENG.
HDCSD100P-VQT1T64_ENG.book 156 ページ ２００８年７月１４日 月曜日 午後８時２分 Panasonic Consumer Electronics Company, Division of Panasonic Corporation of North America One Panasonic Way, Secaucus, NJ 07094 Panasonic Puerto Rico, Inc. Ave. 65 de Infantería, Km. 9.5, San Gabriel Industrial Park, Carolina, Puerto Rico 00985 Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 P VQT1T64 S0708TD0 C © 2008 Matsushita Electric Industrial Co., Ltd.
