HDC-TM700&HS700P&PC-VQT2M75_mst.book 1 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Operating Instructions High Definition Video Camera Model No. HDC-TM700P/PC HDC-HS700P/PC Before connecting, operating or adjusting this product, please read the instructions completely. Spanish Quick Use Guide is included. Guía para rápida consulta en español está incluida. For USA and Puerto Rico assistance, please call: 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 2 ページ Things You Should Know Thank you for choosing Panasonic! You have purchased one of the most sophisticated and reliable products on the market today. Used properly, we’re sure it will bring you and your family years of enjoyment. Please take time to fill in the information on the right. The serial number is on the tag located on the back of your camera. Be sure to retain this manual as your convenient camera information source.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 3 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 THE FOLLOWING APPLIES ONLY IN THE U.S.A. FCC Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 4 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Batteries 1 Battery pack (Lithium ion battery pack) ≥ Use the specified unit to recharge the battery pack. ≥ Do not use the battery pack with equipment other than the specified unit. ≥ Do not get dirt, sand, liquids, or other foreign matter on the terminals. ≥ Do not touch the plug terminals (i and j) with metal objects. ≥ Do not disassemble, remodel, heat or throw into fire.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 5 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 U.S.A./CANADA CONSUMERS: ATTENTION: A lithium ion/polymer battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY for information on how to recycle this battery. This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material – special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 6 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference. 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 7 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Precautions USE & LOCATION WARNING ≥ TO AVOID SHOCK HAZARD ... Your camera and power supply should not be exposed to rain or moisture. Do not connect the power supply or operate your camera if it gets wet. Your camera has been designed for outdoor use, however it is not designed to sustain direct exposure to water, rain, sleet, snow, sand, dust, or a direct splashing from a pool or even a cup of coffee.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 8 ページ ∫ Indemnity about recorded content Panasonic does not accept any responsibility for damages directly or indirectly due to any type of problems that result in loss of recording or edited content, and does not guarantee any content if recording or editing does not work properly. Likewise, the above also applies in a case where any type of repair is made to the unit (including any other non-built-in memory/ HDD related component).
HDC-TM700&HS700P&PC-VQT2M75_mst.book 9 ページ unit may stop the recording or playback operation in order to protect the HDD. ≥ HDD access lamp [ACCESS HDD] (l 21) illuminates while the HDD is being accessed (initialization, recording, playback, deleting etc.). Do not perform the following operations when the lamp illuminates. It may damage the HDD or cause a malfunction in the unit.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 10 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Contents Accessories............................................12 Quick Guide............................................13 Preparation Before using [1] Parts identification and handling ...................................... 16 [HDC-TM700]............................... 16 [HDC-HS700] ............................... 19 Setup [1] Power supply.............................. 22 Charging the battery ....................
HDC-TM700&HS700P&PC-VQT2M75_mst.book 11 ページ 火曜日 午前１０時３４分 With a PC Before using Setup [1] Installation ................................ 123 [2] Connecting to a PC.................. 125 About the PC display ................. 127 [1] Starting HD Writer AE 2.1 ........ 128 Reading the operating instructions of the software applications ....... 128 [2] If using Mac .............................. 129 With a TV Copy/Dubbing With this unit/other products [1] Copying between SD card and Built-in Memory/HDD ..
HDC-TM700&HS700P&PC-VQT2M75_mst.book 12 ページ ２０１０年２月２３日 火曜日 Accessories Check the accessories before using this unit. Product numbers correct as of Feb. 2010. These may be subject to change.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 13 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Quick Guide ∫ Charging the battery Charging lamp [CHARGE] A Lights up: Charging Goes off: Charging completed 1 Connect the AC cable to the AC adaptor and the AC outlet. 2 Insert the battery into the AC adaptor by aligning the arrows. ∫ Inserting the battery Install the battery by inserting it in the direction shown in the figure. 1) Open the LCD monitor. ≥ Check that the access lamp has gone off.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 14 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 To turn off the power ∫ Language selection 1) 2) Press the MENU button, then touch [SETUP] # [LANGUAGE]. Touch [English]. ∫ Selecting a media to record B The status indicator goes off. ∫ Selecting a mode Operate the mode dial to change the mode to , or . 1) 2) Change the mode to Select the menu. or . : [MEDIA SELECT] 3) Touch the media to record motion pictures or still pictures.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 15 ページ 5) ∫ Recording still pictures 1) 2) 3) Change the mode to . Open the LCD monitor or extend the viewfinder. Press the button fully to take the picture. ２０１０年２月２３日 火曜日 午前１０時３４分 Select the playback operation by touching the operation icon. 0h00m00s F A Operation icon ∫ Motion picture/Still picture playback 1) 2) Change the mode to . Touch the play mode select icon A. 3) Touch the desired media to be played back motion pictures or still pictures.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 16 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Preparation 1 Before using Parts identification and handling [HDC-TM700] 1 23 4 5 1 2 3 4 Speaker Power button [ ] (l 29) Inlet (cooling fan) (l 33) Intelligent auto/Manual button [iA/MANUAL] (l 39, 82) 5 Optical image stabilizer button [ /O.I.S.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 17 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 24 LCD monitor (Touch screen) (l 31) 24 25 ≥ It can open up to 90o. 26 27 28 29 30 ≥ It can rotate up to 180o A towards the lens or 90o B towards the viewfinder. Due to limitations in LCD production technology, there may be some tiny bright or dark spots on the LCD monitor screen. However, this is not a malfunction and does not affect the recorded picture.
HDC-TM700&HS700P&PC-VQT2M75_mst.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 19 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 [HDC-HS700] 1 2 3 4 1 2 3 4 5 6 7 8 9 10 11 12 13 15 14 16 17 18 19 20 21 22 23 Speaker Power button [ ] (l 29) Inlet (cooling fan) (l 33) Intelligent auto/Manual button [iA/MANUAL] (l 39, 82) 5 Optical image stabilizer button [ /O.I.S.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 20 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 25 LCD monitor (Touch screen) (l 31) 25 26 ≥ It can open up to 90o. 27 28 29 30 31 ≥ It can rotate up to 180o A towards the lens or 90o B towards the viewfinder. Due to limitations in LCD production technology, there may be some tiny bright or dark spots on the LCD monitor screen. However, this is not a malfunction and does not affect the recorded picture.
HDC-TM700&HS700P&PC-VQT2M75_mst.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 22 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Preparation Setup 1 Power supply ∫ About batteries that you can use with this unit The battery that can be used with this unit is VW-VBG130/VW-VBG260/VW-VBG6. ≥ This unit has a function to distinguish the batteries that can be used, and the batteries (VW-VBG130/VW-VBG260/VW-VBG6) that are compatible with this function. (The batteries that are not compatible with this function cannot be used.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 23 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 ≥ We recommend using Panasonic batteries (l 12, 24, 25, 155). ≥ If you use other batteries, we cannot guarantee the quality of this product. ≥ Do not heat or expose to flame. ≥ Do not leave the battery(ies) in an automobile exposed to direct sunlight for a long period of time with doors and windows closed. Inserting/removing the battery Install the battery by inserting it in the direction shown in the figure.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 24 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Charging and recording time ∫ Charging/Recording time ≥ Temperature: 25 oC (77 oF)/humidity: 60% HDC-TM700 Battery model number [Voltage/Capacity (minimum)] Charging time Supplied battery/ VW-VBG130 (optional) [7.2 V/1250 mAh] 2 h 35 min VW-VBG260 (optional) [7.2 V/2500 mAh] 4 h 40 min VW-VBG6 (optional)* [7.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 25 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 HDC-HS700 Battery model number [Voltage/Capacity (minimum)] Charging time Recording destination HDD Supplied battery/ VW-VBG130 (optional) [7.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 26 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Battery capacity indication ≥ The display changes as the battery capacity reduces. # # # # If there is less than 3 minutes remaining, then will become red. If the battery discharges, then will flash. ≥ The remaining battery capacity is displayed when using the Panasonic battery that you can use for this unit. The actual time can vary depending on your actual use.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 27 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Preparation Setup 2 Recording to a card The unit can record still pictures or motion pictures to an SD card, built-in memory or HDD. To record to an SD card, read the following. This unit (an SDXC compatible device) is compatible with SD Memory Cards, SDHC Memory Cards and SDXC Memory Cards. When using an SDHC memory card/SDXC memory card with other equipment, check the equipment is compatible with these memory cards.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 28 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Inserting/removing an SD card When using an SD card not from Panasonic, or one previously used on other equipment, for the first time on this unit, format the SD card. (l 51) When the SD card is formatted, all of the recorded data is deleted. Once the data is deleted, it cannot be restored. Caution: Check that the access lamp has gone off.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 29 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Preparation Setup 3 Turning the unit on/off You can turn the power on and off using the power button, the LCD monitor or the viewfinder. Turning the power on and off with the power button Press the power button to turn on the power To turn off the power Hold down the power button until the status indicator goes off. A The status indicator lights on.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 30 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Preparation Setup 4 Selecting a mode Change the mode to recording or playback. Operate the mode dial to change the mode to ≥ Align with the status indicator A. Motion Picture Recording Mode (l 35) Still Picture Recording Mode (l 37) Playback Mode (l 41, 86) 30 VQT2M75 , or .
HDC-TM700&HS700P&PC-VQT2M75_mst.book 31 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Preparation Setup 5 Adjusting LCD monitor/ viewfinder How to use the touch screen Viewfinder adjustment You can operate by directly touching the LCD monitor (touch screen) with your finger. It is easier to use the stylus pen (supplied) for detailed operation or if it is hard to operate with your fingers. ∫ Adjusting the field of view ∫ Touch It adjusts the field of view to show the images on the viewfinder clearly.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 32 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Preparation Setup 6 Setting date and time When the unit is turned on for the first time, a message asking you to set the date and time will appear. Select [YES] and perform steps 2 to 3 below to set the date and time. ¬ Change the mode to 1 or . Select the menu. : [SETUP] # [CLOCK SET] 2 Touch the date or time to be set, then set the desired value using / .
HDC-TM700&HS700P&PC-VQT2M75_mst.book 33 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Basic Recording/ Playback 1 Before recording ∫ Basic camera positioning 1 Hold the unit with both hands. 2 Put your hand through the grip belt. 3 It is convenient to use the Sub-recording Start/Stop button A when holding the unit at waist level. ≥ When recording, make sure your footing is stable and there is no danger of colliding with another person or object. ≥ When you are outdoors, record pictures with the sunlight behind you.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 34 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Basic Recording/ Playback 2 Selecting a media to record The card, built-in memory, and HDD media can be selected separately to record motion pictures or still pictures. 1 2 Change the mode to or . Select the menu. : [MEDIA SELECT] 3 Touch the media to record motion pictures or still pictures.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 35 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Basic Recording/ Playback 3 Recording motion pictures 1 2 Change the mode to 3 Press the recording start/stop button to start recording. . Open the LCD monitor or extend the viewfinder. B When you begin recording, ; changes to ¥. 4 Press the recording start/stop button again to pause recording. ≥ Align with the status indicator A. ≥ Still pictures can be recorded while recording the motion picture.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 36 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 ∫ Screen indications in the Motion Picture Recording Mode 0h00m00s HG R 1h20m A Recording mode B Remaining time left for recording (When the remaining time is less than 1 minute, [R 0h00m] flashes red.) C Recording time elapsed Each time the unit is put into recording pause, the counter display will be reset to “0h00m00s”.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 37 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Basic Recording/ Playback 4 Recording still pictures 1 2 Change the mode to 3 Press the button halfway. (For Auto focus only) 4 Press the . Open the LCD monitor or extend the viewfinder. button fully. ≥ Align with the status indicator A. Focus indication: A Focus indication ± (The white lamp flashes.): Focusing ¥ (The green lamp lights up.): When in focus No mark: When focusing is unsuccessful.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 38 ページ ∫ About the screen indications in Still Picture Recording MEGA 14.2M R3000 : ß: ßj: : MEGA : : : 14.2M : R3000: : Still picture operation indicator (l 131) Flash (l 61) Flash level (l 61) Red-eye reduction (l 62) MEGA optical image stabilizer (l 37) Optical image stabilizer (l 56) Quality of still pictures (l 79) Size of still pictures (l 78) Remaining number of still pictures (Flashes in red when [0] appears.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 39 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Basic 5 Recording/ Playback Intelligent Auto Mode The following modes appropriate for the condition are set just by pointing the unit to what you want to record. /MANUAL Intelligent auto/Manual button Press this button to switch Intelligent Auto Mode/Manual Mode. ≥ Please refer to page 82 for details about Manual Mode.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 40 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 ≥ Optical Image Stabilizer function (l 56) is set to Active Mode/ON in all modes. ≥ Faces cannot be detected depending on the recording conditions, such as when faces are of certain sizes or at certain tilts or when digital zoom is used. ≥ The microphone setup is set to surround in the Intelligent Auto Mode.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 41 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Basic Recording/ Playback 6 Motion picture/Still picture playback ≥ Align with the status indicator A. 1 2 Change the mode to 3 Touch the desired media to be played back motion pictures or still pictures. Touch the play mode select icon B. 4 .
HDC-TM700&HS700P&PC-VQT2M75_mst.book 42 ページ 5 ２０１０年２月２３日 火曜日 午前１０時３４分 Select the playback operation by touching the operation icon. A Operation icon 0h00m00s ≥ Touch icon. F / to display/not-display the operation F F Motion picture playback 1/;: 6: 5: ∫: 1: Playback/Pause Rewind playback Fast forward playback Stops the playback and shows the thumbnails. Displays the direct playback bar.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 43 ページ ∫ Change the thumbnail display While the thumbnail is displayed, the thumbnail display changes in the following order if the zoom lever or adjust zoom buttons are operated to side or side. 20 scenes () 9 scenes () 1 scene () Highlight&Time frame index* (l 88) * Highlight&Time frame index can only set in Motion Picture Playback Mode. ≥ 9 scenes display returns if the power is turned off or the mode is changed.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 44 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Basic Setup 1 2 3 1 Using the menu screen Press the MENU button. 4 Touch the desired item to enter the setting. 5 Touch [EXIT] or press the MENU button to exit the menu setting. Touch the top menu A. Touch the submenu B. ∫ About ≥ Next (previous) page can be displayed by touching / .
HDC-TM700&HS700P&PC-VQT2M75_mst.book 45 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Using the quick menu This allows quick setting of some of the menus. 1 Press the Q.MENU button. The following menus can be set. Touch the desired menu. ≥ The items displayed differ depending on the position of the mode dial or settings. Icon 14.2M / 13.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 46 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Basic 2 Setup Using the Setup Menu ≥ The items displayed differ depending on the position or settings of the mode dial. Select the menu. : [SETUP] # desired setting [DISPLAY] [OFF]/[ON] The screen indications are selected as shown in the illustration. ≥ It is possible to set from the quick menu. (l 45) [OFF] [ON] 1h30m A R 1h20m NOV 15 2010 NOV 15 2010 [CLOCK SET] Please refer to page 32.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 47 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 ≥ When the home region is set for the first time, the screen for selecting home/travel destination appears after setting the home region successively. If the home region has already been set once, execute the menu operation for Step 1. 5 (Only when setting the region of your travel destination) Touch / to select your travel destination and touch [ENTER]. ≥ Touch [SUMMER TIME SET] to set daylight saving time.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 48 ページ [QUICK START] ２０１０年２月２３日 火曜日 午前１０時３４分 [OFF]/[ON] This unit is put into recording pause approx. 0.6 seconds after the LCD monitor is reopened or the viewfinder is extended. ≥ When in Quick start standby mode about 80% of the power used in Recording pause mode is being consumed, so the recording time will be reduced. ≥ Start time will not be shortened if there is no SD card inserted.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 49 ペ ペ ペ [REC LAMP] ２ ２ ２ ２ 年２ 月２ ２ 日 火火日 午午２ ２ 時２ ３ 分 [OFF]/[ON] The recording lamp lights up during recording and flashes when the unit receives a signal from the remote control or when the Self-timer is counting down. When this is set to [OFF], it does not light during recording. [ALERT SOUND] [OFF]/ / Touch screen operation, starting and stopping of recording and power on/off can be confirmed with this sound.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 50 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 [EVF SET] It adjusts the brightness of the viewfinder. ≥ These settings will not affect the images actually recorded. 1 2 Extend the viewfinder and open the LCD monitor. Touch [EVF SET]. ≥ The viewfinder turns on. 3 Touch / to adjust the setting. ≥ Adjust while checking the picture in the viewfinder. 4 Touch [ENTER]. ≥ Touch [EXIT] or press the MENU button to complete the setting.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 51 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 [FORMAT MEDIA] Please be aware that if a medium is formatted, then all the data recorded on the medium will be erased and cannot be restored. Back up important data on a PC, DVD disc etc. (l 109, 117) 1 2 Touch [FORMAT MEDIA]. Touch [SD CARD] or [Built-inMemory]. Touch [SD CARD] or [HDD]. ≥ When formatting is complete, touch [EXIT] to exit the message screen.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 52 ページ [DEMO MODE] ２０１０年２月２３日 火曜日 午前１０時３４分 [OFF]/[ON] This item is used to start the unit demonstration. (Only when the mode is at the or position) If [DEMO MODE] is switched to [ON] when there is no SD card inserted and while this unit is connected to the AC adaptor, the demonstration automatically starts. If any operation takes place, the demonstration is canceled. However if no operations take place for approx.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 53 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Basic Using with the remote control 3 Setup 10 Menu button [MENU]* 11 OK button [OK] * means that these buttons function in the same manner as the corresponding buttons on the unit. Select the menu. : [SETUP] # [REMOTE CONTROL] # [ON] 1 2 3 4 START/ STOP /VOL DATE/TIME EXT DISPLAY SEARCH PLAY SEARCH STILL ADV PAUSE STILL ADV SKIP STOP 5 6 7 Remove the insulation sheet A before using.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 54 ページ CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions. Replace battery with Panasonic PART NO. CR2025 only. Use of another battery may present a risk of fire or explosion. Caution: Battery may explode if mistreated. Dispose of used battery promptly. Keep away from children.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 55 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Advanced Zoom in/out function 1 Recording (Advanced) The maximum optical zoom ratio is 12k. The default setting of the [ZOOM MODE] is [i.Zoom 18k]. It can be extended to a maximum of 18k during Motion Picture Recording Mode. (l 66) ¬ Change the mode to or .
HDC-TM700&HS700P&PC-VQT2M75_mst.book 56 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Advanced Recording (Advanced) Optical Image Stabilizer Function 2 Optical Image Stabilizer can stabilize the image without decreasing the image quality as much. ¬ Change the mode to or O.I.S. . Optical image stabilizer button Pressing the button changes the Optical image stabilizer setting.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 57 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Advanced Recording (Advanced) 3 AF/AE tracking It is possible to set the focus and exposure to the subject specified on the touch screen. The focus and exposure will keep following the subject automatically even if it moves. (Dynamic tracking) ¬ Change the mode to 1 Touch or . . ≥ will be displayed on the screen. ≥ When [FACE RECOG.] (l 68) is [ON] and a registered face is detected, the target is automatically locked.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 58 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Advanced Recording (Advanced) 1080/60p recording 4 This is a 1080/60p (1920k1080/60 progressive) recording mode that can record in maximum quality*. * This means the highest quality for this unit. ¬ Change the mode to . 1080 60p 1080/60p button To set to 1080/60p recording mode, press and hold the button until is displayed. ≥ To return to normal recording mode, press and hold the button until disappears.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 59 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Advanced Recording functions of operation icons 5 Recording (Advanced) Select the operation icons to add different effects to the images to be recorded. ¬ Change the mode to 1 or . Touch to display the operation icons on the screen. F F A ≥ Touch 1 at the bottom right of the screen to change the page and touch F / F to display/not-display the operation icon. 2 (e.g. Backlight compensation) Select an operation icon.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 60 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Fade When you start recording, the image/audio gradually appears. (Fade in) When you pause recording, the image/audio gradually disappears. (Fade out) ≥ The Fade setting is canceled when the recording stops. (Fade in) ∫ To select the color for Fade in/out : [RECORD SETUP] # [FADE COLOR] # [WHITE] or [BLACK] (Fade out) ≥ The thumbnails of scenes recorded using fade in become black (or white).
HDC-TM700&HS700P&PC-VQT2M75_mst.book 61 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Smile shot When a smiling face is detected during motion picture recording, the unit automatically records a still picture. The icon changes each time it is touched. (ON) # (Face Recognition) # OFF : : OFF: The unit records a still picture on detecting a smiling face. Still pictures are only recorded when the face of a person registered using Face Recognition (l 68) is detected. Cancel the setting.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 62 ページ ≥ If the ß indication etc. flashes when the button is pressed halfway, the flash is not activated. ２０１０年２月２３日 火曜日 午前１０時３４分 ≥ The available range of the flash is approx. 1 m to 2.5 m (3.3 feet to 8.2 feet) in dark places. ≥ Using the flash fixes a shutter speed to 1/500 or slower. Red-Eye Reduction Reduces the phenomena where human eyes become red from flashes. ≥ The flash is activated 2 times.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 63 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Soft skin mode This makes skin colors appear softer for a more attractive appearance. This is more effective if you record a person closely from the torso up. ≥ If the background or anything else in the scene has colors similar to the skin color, they will also be smoothed. ≥ If the brightness is insufficient, the effect may not be clear. ≥ If you record a person in the distance, the face may not be recorded clearly.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 64 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Color Night Rec This function allows you to record color images in very low light situations. (Minimum required illumination: approx. 1 lx) ≥ Recorded scene is seen as if frames were missed. ≥ If set in a bright place, the screen may become washed out for a while. ≥ Bright dots that are usually invisible may be seen, but this is not a malfunction. ≥ Using a tripod is recommended. ≥ In darker areas, Auto Focus may focus a bit slower.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 65 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Advanced Recording (Advanced) 6 Recording functions of menus [SCENE MODE] When you record images in different situations, this mode automatically sets optimum shutter speeds and apertures. ≥ Change the mode to or .
HDC-TM700&HS700P&PC-VQT2M75_mst.book 66 ページ ≥ (Fireworks) j The shutter speed is 1/30. j Image may get washed out when recorded in bright surroundings. ２０１０年２月２３日 火曜日 午前１０時３４分 ≥ (Night scenery/Night portrait) j The shutter speed is 1/2 or more in Still Picture Recording Mode. j Using a tripod is recommended. ≥ (Night portrait) j The flash is set to [ON]. [ZOOM MODE] Set the maximum zoom ratio for the Motion Picture Recording Mode. ≥ Change the mode to .
HDC-TM700&HS700P&PC-VQT2M75_mst.book 67 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 [TIME LAPSE REC] A scene that moves slowly for long period of time is recorded frame by frame with an interval, and is recorded as a short time motion picture. A frame is recorded with a set recording interval. 30 frames will make up motion picture of 1 second. ≥ Change the mode to . : [RECORD SETUP] # [TIME LAPSE REC] # desired setting ≥ It is possible to set from the quick menu.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 68 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 [RELAY REC] It is possible to continuously record motion picture to an SD card when there is no space available in the built-in memory. (It allows you to record only to SD card from built-in memory.) ≥ Change the mode to . : [RECORD SETUP] # [RELAY REC] # [ON] ≥ is displayed on the screen. will disappear when space in the built-in memory is gone and the recording to the SD card starts. ≥ Relay recording can only be performed once.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 69 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 ∫ Registering a face for face recognition [RECORD SETUP] # [FACE RECOG.] # [SET] # [SAVE] ≥ Up to a maximum of 6 people can be registered. 1 Align the person’s face with the guide. ≥ Take a picture of the persons face from the front, ensuring that their hair does not hide the outline of their face, their eyes or their eyebrows. 2 Touch [REC] or press the button fully. ≥ Touch [ENTER].
HDC-TM700&HS700P&PC-VQT2M75_mst.book 70 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 ∫ Changing the information of a registered person 1 Select the menu. [RECORD SETUP] # [FACE RECOG.] # [SET] # [EDIT] 2 Touch the desired item to enter the setting. ≥ Up to 3 face shots can be registered. To additionally register or to change/delete the registered face shots, touch or the face shot. [SET NAME]: Change the name.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 71 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 [NAME DISPLAY] When a registered person is detected by face recognition during recording, the name registered for that person is displayed. ≥ Change the mode to or . : [RECORD SETUP] # [NAME DISPLAY] # desired number [OFF]/[1]/[2]/[3] ≥ Displayed name will disappear after a while. ≥ It is displayed according to the registration order setting from the first person.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 72 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 [AUTO SLOW SHTR] You can record bright pictures even in dark places by slowing the shutter speed. ≥ Change the mode to . ≥ Switch to Manual Mode. (l 82) : [RECORD SETUP] # [AUTO SLOW SHTR] # [ON] ≥ The shutter speed is set to 1/30 or more depending on the surrounding brightness. ≥ This function cannot be used in Still Picture Recording Mode.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 73 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 [WIND NOISE CANCELER] This will reduce the wind noise coming into the built-in microphones while maintaining the realism. ≥ Change the mode to . ≥ Switch to Manual Mode. (l 82) : [RECORD SETUP] # [WIND NOISE CANCELER] # [ON] ≥ When switching to Intelligent Auto Mode, [WIND NOISE CANCELER] is set to [ON], and the setting cannot be changed. ≥ You may not see the full effect depending on the recording conditions.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 74 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 [MIC LEVEL] When recording, the input level from the built-in microphones and the external microphone terminal can be adjusted. ≥ Change the mode to . ≥ Switch to Manual Mode. (l 82) 1 Select the menu. : [RECORD SETUP] # [MIC LEVEL] # desired setting [AUTO]: [SETr AGC is activated, and the recording level is adjusted automatically. ]/[SET]: The desired recording level can be set.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 75 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 [BASS SETTING] Change the lower setting of the built-in microphone according to your choice. ≥ Change the mode to . ≥ Switch to Manual Mode. (l 82) : [RECORD SETUP] # [BASS SETTING] # desired setting [0dB]/[+3dB]/[+6dB]/[LOWCUT] ≥ Normally set to [0dB]. ≥ Select [+3dB] or [+6dB] to get strong power feeling at bass level. [PICTURE ADJUST] Adjust the quality of the image while recording.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 76 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 [ZEBRA] Parts where white saturation (color saturation) is likely to occur (extremely brightly lit or shiny parts) are displayed with diagonal lines (zebra pattern). ≥ Change the mode to or . ≥ Switch to Manual Mode. (l 82) : [RECORD SETUP] # [ZEBRA] # [ON] ≥ It is possible to set from the quick menu in Manual Mode.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 77 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 [HISTOGRAM] A graph with brightness as horizontal axis and number of pixels at that brightness as vertical axis is displayed. It is possible to determine the exposure of the whole image by looking at the distribution in the graph. Adjust the brightness using [IRIS]. (l 84) ≥ Change the mode to or . ≥ Switch to Manual Mode. (l 82) : [RECORD SETUP] # [HISTOGRAM] # desired setting ≥ It is possible to set from the quick menu in Manual Mode.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 78 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 [PICTURE SIZE] The higher the number of pixels, the higher the clarity of the picture when printing. ≥ Change the mode to . : [PICTURE] # [PICTURE SIZE] # desired setting ≥ It is possible to set from the quick menu. (l 45) ≥ The number of recording pixels that can be set changes depending on selected screen aspect ratio. (l 79) ∫ Picture size and Maximum zoom ratio Aspect ratio Picture size Extra optical zoom (l 55) 12.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 79 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 [QUALITY] Selecting the picture quality. ≥ Change the mode to or . : [PICTURE] # [QUALITY] # desired setting : : Still pictures with a high picture quality are recorded. Priority is given to the number of still pictures recorded. Still pictures are recorded in normal picture quality. [ASPECT RATIO] This allows you to select the aspect ratio of the pictures to suit printing or the playback method. ≥ Change the mode to .
HDC-TM700&HS700P&PC-VQT2M75_mst.book 80 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 [HI-SPEED BURST] Recording is done continuously at the rate of 60 still pictures per second. Use this function to record an object with fast movement. ≥ Change the mode to . 1 Select the menu. : [PICTURE] # [HI-SPEED BURST] # desired setting [OFF]: Cancel the setting. [60 frames/sec]: 180 still pictures are recorded continuously at the rate of 60 per second. The picture size is 2.1 M (1920k1080).
HDC-TM700&HS700P&PC-VQT2M75_mst.book 81 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 [AF ASSIST LAMP] Illuminating the subject makes it easier for the camera to focus when recording in low light conditions that make focusing difficult. ≥ Change the mode to . ≥ Switch to Manual Mode. (l 82) : [PICTURE] # [AF ASSIST LAMP] # [AUTO] ≥ The available distance of the AF assist lamp is approx. 1.5 m (5 feet). ≥ A conversion lens (optional) can block the AF assist lamp, and it will become harder to adjust the focus.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 82 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Advanced Recording manually by setting white balance, shutter speed or iris adjustment 7 Recording (Advanced) The operation sequence differs for the LCD monitor and viewfinder. ¬ Change the mode to or . Press the iA/MANUAL button or CAMERA FUNCTION button to switch to Manual Mode. ≥ appears on the screen.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 83 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 White balance Automatic white balance function may not reproduce natural colors depending on the scenes or lighting conditions. If so, you can adjust the white balance manually. ≥ Press the iA/MANUAL button or CAMERA FUNCTION button to switch to Manual Mode. (l 82) ≥ For how to perform the settings when using the viewfinder, refer to page 82 1 2 Touch [WB]. ∫ To set the white balance manually Touch / to select White balance mode.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 84 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Manual shutter speed/iris adjustment Shutter Speed: Adjust it when recording fast-moving subjects. Iris: Adjust it when the screen is too bright or too dark. ≥ Press the iA/MANUAL button or CAMERA FUNCTION button to switch to Manual Mode. (l 82) ≥ For how to perform the settings when using the viewfinder, refer to page 82 1 2 Touch [SHTR] or [IRIS]. Touch / to adjust settings.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 85 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Advanced 8 Recording (Advanced) Recording with Manual focus Perform focus adjustments using the multi manual ring. If auto focusing is difficult due to the conditions, then use Manual Focus. ¬ Change the mode to or . ≥ Press the iA/MANUAL button or CAMERA FUNCTION button to switch to Manual Mode.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 86 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Advanced Playback (Advanced) 1 Playback Operations Motion picture playback using operation icon For details on the basic playback operations, refer to page 41. Playback operation Playback display Fast forward/ rewind playback During Playback Frame-by-frame playback The motion picture is advanced one frame at a time. 86 VQT2M75 Touch 5 during playback to fast forward. (Touch 6 to rewind.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 87 ページ Playback operation ２０１０年２月２３日 Playback display 火曜日 午前１０時３４分 Operating steps Touch 1 to display the direct playback bar A. 2) Touch the direct playback bar. ≥ The playback is paused and the image is skipped until the position you touched. ≥ Playback starts again when you release the touch screen. ≥ Touch 2 to display the operation icon. ≥ Direct playback bar cannot be operated with the remote control.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 88 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Highlight&Time frame index An image of one scene is displayed as a thumbnail at set search condition. Scene can be played back from any midway point of the scene you wish to see. ≥ Operate the zoom lever or the adjust zoom buttons to side and change over the thumbnail display to Highlight&Time frame index. (l 43) 1 Touch selected search condition. ≥ Next (previous) scene can be displayed by touching / .
HDC-TM700&HS700P&PC-VQT2M75_mst.book 89 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Resuming the previous playback If playback of a scene was stopped halfway, the playback can be resumed from where it was stopped. : [VIDEO SETUP] # [RESUME PLAY] # [ON] If playback of a motion picture is stopped, scene. appears on the thumbnail view of the stopped ≥ The memorized resume position is cleared if you turn off the power or change the mode. (The setting of [RESUME PLAY] does not change.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 90 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Advanced Playback (Advanced) 2 Various playback functions Playing back motion pictures/still pictures by date The scenes or the still pictures recorded on the same day can be played back in succession. 1 Touch the date select icon. A Date select icon 2 Touch the playback date. The scenes or the still pictures recorded on the date selected are displayed as thumbnails.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 91 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Face Highlight Playback/Highlight Playback/Intelligent Scene Selection A part can be extracted and played back even when not set to normal playback. 1 2 Touch . Touch the desired playback mode. [FACE HIGHLIGHT]: Giving priority to the parts with detected faces, the part that was recognized as clearly recorded is extracted from a long recording, and it can be played back in a short time with music added.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 92 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 ≥ Playing back of all the scenes returns if the power is turned off or the mode is changed. (Highlight playback) ≥ Highlight playback cannot be performed with interval-recorded motion pictures. (l 67) (Intelligent scene selection) ≥ Up to 9 sections can be skipped for a single scene. ≥ When motion pictures are skipped, the image stops momentarily. ≥ Divided scene will not be skipped.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 93 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 ∫ Playback time setting Touch the playback time to set. ≥ The playback time of [AUTO] is a maximum of approx. 5 minutes. ≥ Playback time may become shorter than the setting, or it may not even play back if the part recognized as clearly recorded is short. ∫ Date setting Touch the playback date. ∫ Music setting 1 Touch your favorite music. ≥ When [NO MUSIC] is selected, the audio recorded at the time of shooting is played back.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 94 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Changing the playback settings and playing back the slide show 1 Touch 2 Touch the desired item. . [DATE SETUP]: Select the date to be played back. [SLIDE INTERVAL]: Selects the interval between still pictures at playback. [MUSIC SELECT]: Select the music to be played on playback. 3 (When [DATE SETUP] is selected) Touch the playback date.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 95 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Advanced Deleting scenes/still pictures 1 Editing Deleted scenes/still pictures cannot be restored, so perform appropriate confirmation of the contents before proceeding with deletion. ¬ Change the mode to . To delete by confirming images being played back 0h00m00s Press the button while scenes or still pictures to be deleted are being played back.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 96 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 ≥ You can also delete scenes by pressing the MENU button, selecting [EDIT SCENE] # [DELETE] # [ALL SCENES] or [SELECT]. ≥ You can also delete still pictures by pressing the MENU button, selecting [PICT. SETUP] # [DELETE] # [ALL SCENES] or [SELECT]. ≥ During Face Highlight Playback, Highlight Playback, Intelligent Scene Selection, or Disc Playback when connected to a DVD burner (optional), scenes/still pictures cannot be deleted.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 97 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Deleting personal information Deletes face recognition information from scenes in which faces were recognized. ≥ Change the mode to 1 Select the menu. : [VIDEO SETUP] # [DELETE PERSONAL INFO] 2 Touch the desired scenes with personal information to be deleted. ≥ appears at scenes for which faces were recognized. Touch one of the scenes where appears. ≥ will change to (red) when touched.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 98 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Advanced 2 Editing DPOF setting You can write the data selecting still pictures to be printed and the number of prints (DPOF data) onto the SD card. (Copy still pictures recorded to the built-in memory or HDD to the SD card before setting DPOF.) ¬ Change the mode to and touch the play mode select icon to select [PICTURE/SD CARD].
HDC-TM700&HS700P&PC-VQT2M75_mst.book 99 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Advanced Editing Relay scene combining 3 [HDC-TM700] You can combine the relayed scene (l 68) in the built-in memory and the continued scene in the SD card to be one into the SD card. Relay-recorded scene Relay scene combining A Built-in memory B SD card C Range of Relay recording ≥ Change the mode to media. (l 41) 1 2 and touch the play mode select icon to select desired Insert the SD card that was used for Relay recording.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 100 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 To cancel relay information [EDIT SCENE] # [RELAY INFO CANCEL] ≥ When the relay information is canceled, combining of the relayed scenes will not be possible anymore. Combining of the relay scene cannot be performed if the available space on the SD card is less than the volume of the relayed scene in the built-in memory. It is recommended to combine the relay scene using a DVD burner or the HD Writer AE 2.1.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 101 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Advanced With a TV 1 Watching Video/Pictures on your TV Confirm the terminals on your TV and use a cable compatible with the terminals. Image quality may vary with the connected terminals. 1 High quality 2 HDMI terminal 3 Component terminal 4 Video terminal ≥ Use the supplied AV multi cable. Check the output settings when connecting the component terminal or the video terminal with the AV multi cable.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 102 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 ≥ Check that the plugs are inserted as far as they go. ≥ Do not use any other cables except a genuine Panasonic HDMI mini cable (RP-CDHM15, RP-CDHM30; optional). ≥ Do not use any other AV multi cables except the supplied one. ≥ When connecting to the component terminal of the TV, the yellow plug of the AV multi cable is not required.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 103 ページ ∫ To watch images on a regular TV (4:3) or when both sides of the images do not appear on the screen Change the menu setting to display the images correctly. (Check the TV setting.) : [SETUP] # [TV ASPECT] # ２０１０年２月２３日 火曜日 午前１０時３４分 ∫ To display the on-screen information on the TV When the EXT DISPLAY button on the remote control is pressed, the information displayed on the screen (operation icon and time code etc.) can be displayed/not displayed on the TV.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 104 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Connecting with a HDMI mini cable Select the desired method of HDMI output. : [SETUP] # [HDMI RESOLUTION] # [AUTO]/[1080p]/[1080i]/[480p] ≥ [AUTO] determines the output resolution automatically based on information from the connected TV. If the images are not output on the TV when the setting is [AUTO], switch to the method [1080p], [1080i] or [480p] which enables the images to be displayed on your TV.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 105 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Advanced With a TV Playback using VIERA Link™ (HDAVI Control™) 2 What is the VIERA Link? ≥ VIERA Link™ is a new name for EZ Sync™. ≥ This function allows you to use your remote control for the Panasonic TV for easy operations when this unit has been connected to a VIERA Link compatible device using a HDMI mini cable (optional) for automatic linked operations. (Not all operations are possible.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 106 ページ 3 ２０１０年２月２３日 火曜日 午前１０時３４分 Operate with the remote control for the TV. 1) 2) 1) Press the button up, down, left or right to select a scene or still picture to be played back, and then press the button in the center to set it. 2) Activate the operation icons that are displayed on TV screen with the remote control for the TV.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 107 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Copy/Dubbing With this unit/other products 1 Copying between SD card and Built-in Memory/HDD Motion pictures or still pictures recorded with this unit can be copied between an SD card inserted in this unit and a built-in memory/HDD. ∫ Confirming remaining capacity on the copy destination [MEDIA STATUS] (l 51) allows you to confirm how much capacity remains on the SD card, built-in memory or HDD.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 108 ページ 3 ２０１０年２月２３日 火曜日 午前１０時３４分 Touch desired items following the screen display. ≥ It will return to the previous step by touching . ≥ (When [SELECT SCENES] is selected) When touched, the scene/still picture is selected and the indication appears on the thumbnail. Touch the scene/still picture again to cancel the operation. ≥ (When [SELECT DATE] is selected) When touched, the date is selected and surrounded by red. Touch the date again to cancel the operation.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 109 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Copy/Dubbing With this unit/other products 2 Connecting a DVD burner to copy to/play back a disc Motion pictures or still pictures recorded with this unit can be copied to a DVD disc by connecting a DVD burner (optional) to this unit using a Mini AB USB Connection Cable (supplied with DVD burner). The copied DVD disc can also be played back. ≥ Please read the operating instructions of the DVD burner for how to use it.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 110 ページ 1 ２０１０年２月２３日 火曜日 午前１０時３４分 Connect the AC adaptor (supplied with DVD burner) to the DVD burner. ≥ You cannot supply power to the DVD burner from this unit. 2 3 Connect this unit to the AC adaptor and change the mode to Connect this unit to the DVD burner with the Mini AB USB Connection Cable (supplied with DVD burner). A Mini AB USB Connection Cable (supplied with DVD burner) B DVD burner (optional) ≥ Insert the plugs as far as they will go.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 111 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Copying to discs ≥ You cannot copy from multiple SD cards to 1 disc. (You can additionally copy only to a DVD-RAM.) ≥ You cannot copy motion pictures together with still pictures or motion pictures in a different picture quality (AVCHD picture quality and conventional normal picture quality) to the same disc.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 112 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 ∫ About recording formats when copying motion pictures [AVCHD] ([HA]/[HG]/[HX]/[HE]): The scenes recorded in 1080/60p by this unit will be copied after converting to AVCHD picture quality. Normal scenes will be copied as high definition picture quality as recorded. ≥ When copying scenes recorded in 1080/60p, select the recording picture quality ([HA]/ [HG]/[HX]/[HE]).
HDC-TM700&HS700P&PC-VQT2M75_mst.book 113 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Approximate time for copying to a disc To copy motion pictures to the full capacity of a disc Copy time Disc type [AVCHD] DVD-RAM Approx. 50 min to 80 min DVD-RW*/ +RW* Approx. 35 min to 75 min DVD-R*/+R* Approx. 15 min to 45 min [Standard] ([XP]) [Standard] ([SP]) Approx. 90 min to 120 min Approx.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 114 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 ≥ The disc that was copied to can be played back by connecting this unit and a DVD burner. ≥ Do not turn off this unit or the DVD burner or disconnect the Mini AB USB Connection Cable while copying. Also, do not shake this unit or the DVD burner. ≥ It is impossible to stop copying halfway. ≥ The order in which the scenes were copied cannot be changed. ≥ Data that has been recorded on another device may not be copied.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 115 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Managing the copied disc ≥ Connect this unit to the DVD burner and then touch [PLAY DISC]. (l 110) ∫ Formatting discs This is for initializing DVD-RAM, DVD-RW and +RW discs. Please be aware that if a disc is formatted, then all the data recorded on the disc will be erased. Back up important data on a PC etc. : [DISC SETUP] # [FORMAT DISC] ≥ When formatting is complete, touch [EXIT] to exit the message screen.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 116 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Copy/Dubbing With this unit/other products 3 Dubbing images onto other video devices Images played back on this unit can be dubbed onto a DVD recorder or video device. ≥ Images are dubbed in standard quality. ≥ Use the AC adaptor to free you from worrying about the battery running down. Change the video input on the video device and TV that this unit is connected to.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 117 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 With a PC Before using 1 What you can do with a PC HD Writer AE 2.1 You can copy the motion/still picture data to the HDD of PCs or write to media like Blu-ray discs (BD), DVD discs or SD cards using HD Writer AE 2.1, the software installed in the supplied CD-ROM. Refer to the operating instructions of HD Writer AE 2.1 (PDF file) for details on how to use it.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 118 ページ Available function ２０１０年２月２３日 Data type Playing back on a PC Still picture Copying still pictures to a PC (l 127) 火曜日 午前１０時３４分 Software required HD Writer AE 2.1 or Standard Windows picture viewer or a commercially available picture viewer Windows Explorer Refer to page 129 if using a Mac. Important Notice ≥ When using an SDXC Memory Card, check the following support site. http://panasonic.net/avc/sdcard/information/SDXC.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 119 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 End User License Agreement Before opening the CD-ROM package, please read the following. You (“Licensee”) are granted a license for the Software defined in this End User License Agreement (“Agreement”) on condition that you agree to the terms and conditions of this Agreement.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 120 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 With a PC Before using 2 Operating environment ≥ Even if the system requirements mentioned in these operating instructions are fulfilled, some PCs cannot be used. ≥ A CD-ROM drive is necessary to install the supplied software applications. (A compatible BD/DVD writer drive and media are necessary for writing to a BD/DVD.) ≥ Operation is not guaranteed in the following cases.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 121 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Display High Color (16 bit) or more (32 bit or more recommended) Desktop resolution of 1024k768 pixels or more (1280k1024 pixels or more recommended) Windows Vista/Windows 7: DirectX 9.0c compatible video card (DirectX 10 recommended) Windows XP: DirectX 9.
HDC-TM700&HS700P&PC-VQT2M75_mst.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 123 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 With a PC Setup 1 Installation When installing the software, log on to your computer as the Administrator or with a user name with equivalent authorization. (If you do not have authorization to do this, consult your manager.) ≥ Before starting the installation, close all applications that are running. ≥ Do not perform any other operations on your PC while the software is being installed.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 124 ページ 7 ２０１０年２月２３日 火曜日 午前１０時３４分 When installation is complete, some notes will appear. Check the contents, then close the window. 8 Select [Yes, I want to restart my computer now.], then click [Finish]. The PC must be rebooted for the application to work. ∫ Uninstalling HD Writer AE 2.1 Follow the steps below to uninstall any software applications that you no longer require. 1 Select [Start] # [Control Panel] # [Uninstall a Program].
HDC-TM700&HS700P&PC-VQT2M75_mst.book 125 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 With a PC Setup 2 Connecting to a PC ≥ Connect this unit to the PC after the software applications are installed. ≥ Remove the supplied CD-ROM from your PC. A USB cable (supplied) 1 Connect this unit to the AC adaptor. ≥ It is possible to use the unit connected to the PC with the batteries only, but you will not be able to write data into the unit. ≥ Connect with the AC adaptor when using the Conversion Assist Function.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 126 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 ≥ When the unit is connected to a PC, its power cannot be turned off. Disconnect the USB cable, before turning this unit off. ≥ Do not disconnect the USB cable or the AC adaptor while the access lamp is on or card access icon ( ) appears on the unit screen. ≥ Do not disconnect the USB cable or the AC adaptor while the access lamp is on or built-in memory access icon ( ) appears on the unit screen.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 127 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 About the PC display When the unit is connected to a PC, it is recognized as an external drive. ≥ Removable disk (Example: ) is displayed in [Computer]. We recommend using HD Writer AE 2.1 to copy or write back motion picture data. Using Windows Explorer or other programs on the PC to copy, move or rename files and folders recorded with this unit will result in them being unusable with HD Writer AE 2.1.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 128 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 With a PC Using with a PC 1 Starting HD Writer AE 2.1 ≥ When using HD Writer AE 2.1 on Windows XP, log on to your computer as Administrator (or with a login name equally authorized). If you log on with a login name other than Administrator, you cannot use the applications. ≥ When using HD Writer AE 2.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 129 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 With a PC Using with a PC 2 If using Mac ≥ HD Writer AE 2.1 is not available for Mac. ≥ iMovie’09 supported. For details about iMovie’09, please contact Apple Inc. ≥ 1080/60p scenes cannot be imported to a Mac. Import after converting to a normal scene using [ ]/[ ]. (l 107) ∫ Operating environment PC Mac OS Mac OS X 10.5.8 Mac OS X 10.
HDC-TM700&HS700P&PC-VQT2M75_mst.
HDC-TM700&HS700P&PC-VQT2M75_mst.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 132 ページ ∫ Indication of connection to other devices Accessing the card (l 126) Accessing the built-in memory (l 126)*1 Accessing the HDD (l 126)*2 ∫ Confirmatory indications –– (Time display) The built-in battery is low.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 133 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Others Indications 2 Messages Major confirmation/error messages to be indicated on the screen in text. * only RECOMMEND DATA BACK UP PERIODICALLY. We recommend backing up important recorded motion pictures and still pictures periodically to a PC, DVD disc etc. to protect it. (l 109, 117) This message does not indicate that there is a problem with this unit. HDD BACKUP RECOMMENDED.* There is a possible problem with the HDD.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 134 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 PLEASE CHECK EXTERNAL DRIVE OR DISC. A disc that cannot be used when connecting the unit to the DVD burner has been inserted, or the DVD burner is not recognized properly. Connect the Mini AB USB Connection Cable again and insert a disc to copy the data. (l 109) About recovery If faulty management information is found, the messages may appear and a repair is performed. (Repairing may take time depending on the error.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 135 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Others Troubleshooting Problem This unit cannot be turned on. This unit does not stay on long enough. Battery runs down quickly. Check points ≥ Charge the battery again to ensure it is sufficiently charged. (l 22) ≥ In cold places, the battery using time becomes shorter. ≥ The battery has a limited life.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 136 ページ Problem ２０１０年２月２３日 火曜日 午前１０時３４分 Check points Item other than the touched one is selected. ≥ Calibrate the touch screen. (l 51) The remote control does not function. ≥ [REMOTE CONTROL] of the [SETUP] is [OFF]. (l 53) ≥ The button-type battery of the remote control may have run out. Replace it with a new button-type battery. (l 53) The remaining time indication or the elapsed time indication is not shown. ≥ [DISPLAY] of the [SETUP] is [OFF].
HDC-TM700&HS700P&PC-VQT2M75_mst.book 137 ページ Problem ２０１０年２月２３日 火曜日 午前１０時３４分 Check points Any scenes/still pictures cannot be played back. ≥ Any scenes/still pictures where the thumbnails are displayed as cannot be played back. Although this unit is correctly connected to a TV, images cannot be seen. ≥ Please read the operating instructions of your TV and select the channel that matches the input used for the connection. ≥ Change the [TV ASPECT] setting to match the aspect ratio of the TV.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 138 ページ Problem Object seems to be warped. White round spots like soap bubbles appear on the recorded picture. ２０１０年２月２３日 火曜日 午前１０時３４分 Check points ≥ Object seems to be warped slightly when the object moves across the image very fast, but this is because the unit is using MOS for the image sensor. This is not a malfunction.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 139 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Problem Check points When connected by the USB cable, this unit is not detected by the PC. ≥ After re-inserting the SD card into the unit, reconnect the supplied USB cable. ≥ Select another USB terminal on the PC. ≥ Check the operating environment. (l 120) ≥ Connect the supplied USB cable again after restarting the PC and turning on this unit again. When the USB cable is disconnected, an error message will appear on the PC.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 140 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 ∫ If scenes do not change smoothly when played back on another device The images may be still for several seconds at the joins between the scenes if the following operations are performed when multiple scenes have been continuously played back using another unit. ≥ Just how smoothly the scenes will be played back depends on the playback unit.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 141 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Others Cautions for use About this unit The unit and the SD card become warm during use. This is not a malfunction. Keep the High Definition Video Camera as far away as possible from electromagnetic equipment (such as microwave ovens, TVs, video games etc.).
HDC-TM700&HS700P&PC-VQT2M75_mst.book 142 ページ Do not use the unit for surveillance purposes or other business uses. ≥ This unit was designed for consumer intermittent use. It was not intended for continuous use, or for any industrial or commercial application resulting in prolonged use. ≥ In certain situations, continuous use could cause the unit to overheat and cause a malfunction. Such use is strongly discouraged.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 143 ページ temperature as possible. (Recommended temperature: 15 °C to 25 °C (59 °F to 77 °F), Recommended humidity: 40% to 60%) ≥ Extremely high temperatures or low temperatures will shorten the life of the battery. ≥ If the battery is kept in high-temperature, high-humidity, or oily-smoky places, the terminals may rust and cause malfunctions.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 144 ページ About the SD card When disposing of or giving away the SD card, note that: ≥ Formatting and deletion of this unit or computer only changes the file management information and does not completely delete the data in the SD card. ≥ It is recommended that the SD card is physically destroyed or the SD card is physically formatted using this unit when disposing of or giving away the SD card.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 145 ページ About personal information After you have set up the face recognition function, personal information will be held in this unit and included in recorded images. ≥ When the unit is serviced, or given away/ disposed of, the personal information should be deleted in the interests of protecting personal information.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 146 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Others About copyright ∫ Carefully observe copyright laws Whatever you have recorded and created can be used for your personal entertainment only. Under copyright laws, other materials cannot be used without obtaining permission from the holders of the copyrights. ∫ Licenses ≥ SDXC Logo is a trademark of SD-3C, LLC. ≥ “AVCHD” and the “AVCHD” Logo are trademarks of Panasonic Corporation and Sony Corporation.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 147 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Others Recording modes/approximate recordable time ≥ SD cards are only mentioned with their main memory size.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 148 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Others Number of recordable pictures ≥ SD cards are only mentioned with their main memory size. (In Still Picture Recording Mode) Aspect ratio 7.7M 4.9M 0.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 149 ページ Aspect ratio Picture size Picture quality 512 MB 1 GB 2 GB 4 GB 8 GB SD card 16 GB 24 GB 32 GB 48 GB 64 GB Built-in memory HDD ２０１０年２月２３日 火曜日 午前１０時３４分 16:9 13.3M 8.3 M 5.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 150 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Others Specifications High Definition Video Camera Information for your safety Power source: Power consumption: DC 9.3 V (When using AC adaptor) DC 7.2 V (When using battery) Recording: 6.0 W 6.3 W Signal system 1080/60p, 1080/60i Recording format 1080/60p: Original format HA/HG/HX/HE: AVCHD format compliant Image sensor 1/4.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 151 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Monitor 3z wide LCD monitor (Approx. 230 K dots) Viewfinder 0.27z wide EVF (Approx. 123 K dots) Microphone 5.1 channel surround microphone (with a zoom microphone/ focus microphone function) Speaker 1 round speaker, dynamic type White balance adjustment Auto tracking white balance system Standard illumination 1,400 lx Minimum required illumination Approx. 1.6 lx (1/30 in Low light mode) Approx.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 152 ページ Dimensions ２０１０年２月２３日 火曜日 午前１０時３４分 66 mm (W)k69 mm (H)k138 mm (D) [2.59 q (W)k2.71 q (H)k5.43 q (D)] (excluding projecting parts) 65 mm (W)k69 mm (H)k138 mm (D) [2.55 q (W)k2.71 q (H)k5.43 q (D)] (excluding projecting parts) Approx. 380 g (Approx. 0.84 lbs.) [without battery (supplied)] Mass (Weight) Approx. 450 g (Approx. 0.99 lbs.) [without battery (supplied)] Approx. 440 g (Approx. 0.97 lbs.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 153 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Still pictures Recording media SD card SD Memory Card (FAT12 and FAT16 system compliant) SDHC Memory Card (FAT32 system compliant) SDXC Memory Card (exFAT system compliant) Refer to page 27 for details on SD cards usable in this unit. Built-in memory 32 GB HDD 240 GB Compression JPEG (Design rule for Camera File system, based on Exif 2.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 154 ページ ２０１０年２月２３日 AC adaptor Information for your safety Power source: Power consumption: DC output: AC 110 V to 240 V, 50/60 Hz 19 W DC 9.3 V, 1.2 A (Unit operation) DC 8.4 V, 0.65 A (Battery charging) Dimensions 92 mm (W)k33 mm (H)k61 mm (D) [3.6 q (W)k1.3 q (H)k2.4 q (D)] Mass (Weight) Approx. 115 g (Approx. 0.25 lbs.) Specifications may change without prior notice.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 155 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Others Optional accessories Accessory No. Figure Description VW-AD21PP-K*1 AC adaptor with AC Cable and DC Cables VW-VBG130*2 Rechargeable Lithium Ion Battery Pack VW-VBG260*2 Rechargeable Lithium Ion Battery Pack VW-VBG6*2 Rechargeable Lithium Ion Battery Pack ≥ The battery pack holder kit/ VW-VH04 (optional) is necessary.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 156 ページ Accessory No.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 157 ページ ∫ Attaching the battery pack holder kit To use the VW-VBG6 for this unit, the battery pack holder kit/VW-VH04 (optional) is required. ２０１０年２月２３日 火曜日 午前１０時３４分 ∫ Attaching the optional accessories on the shoe adaptor/accessory shoe The video DC light/VW-LDC103PP (optional) etc. can be mounted on the shoe adaptor (supplied). 1 Open the shoe adaptor cover. 2 Attach the shoe adaptor to this unit. 3 Attach the video DC light to this unit.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 158 ページ ≥ When removing the shoe adaptor, slide the SHOE ADAPTOR RELEASE lever, and remove the shoe adaptor while sliding the lever. SHOE ADAPTOR RELEASE ２０１０年２月２３日 火曜日 午前１０時３４分 ∫ Attaching the conversion lens/ filter kit Attach the wide conversion lens (VW-W4607H; optional), the wide end conversion lens (VW-WE08H; optional), ND filter or MC protector of the Filter kit (VW-LF46N; optional) in front of the lens.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 159 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Accessory Order Form (For USA and Puerto Rico Customers) Please photocopy this form when placing an order. 1. Model # 2. Items Ordered Accessory # Description Price Each Quantity Total Price Subtotal Your State & Local Sales Tax Shipping & Handling 6.95 Total Enclosed 3. Method of payment (check one) Check of Money Order enclosed (NO C.O.D.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 160 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Limited Warranty (ONLY FOR U.S.A.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 161 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED WARRANTY COVERAGE”. THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. (As examples, this excludes damages for lost time, travel to and from the servicer, loss of or damage to media or images, data or other memory or recorded content.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 162 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Warranty (For Canadian Customers) Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 PANASONIC PRODUCT – LIMITED WARRANTY Panasonic Canada Inc.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 163 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Index ∫ Numerics 1080/60p recording . . . . . . . . . . . . . . . 58 5.1 channel . . . . . . . . . . . . . . . . . . . . 104 ∫A AC adaptor . . . . . . . . . . . . . . 22, 26, 143 Accessory shoe . . . . . . . . . . . . . . . . . . 19 AF assist lamp . . . . . . . . . . . . . . . . . . . 81 AF/AE tracking . . . . . . . . . . . . . . . . . . 57 Alert sound . . . . . . . . . . . . . . . . . . . . . 49 Aspect ratio . . . . . . . . . . . . .
HDC-TM700&HS700P&PC-VQT2M75_mst.book 164 ページ Limited Warranty (Canada) . . . . . . . . 162 Limited Warranty (USA and Puerto Rico) . . . . . . . . . . . 160 Luminance . . . . . . . . . . . . . . . . . . . . . 76 ∫M Manual focus . . . . . . . . . . . . . . . . . . . . 85 Manual recording . . . . . . . . . . . . . . . . . 82 Media select . . . . . . . . . . . . . . . . . 34, 41 Media status . . . . . . . . . . . . . . . . . . . . 51 Menu . . . . . . . . . . . . . . . . . . . . . . . . . 44 MF assist . . . .
HDC-TM700&HS700P&PC-VQT2M75_mst.book 165 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Spanish Quick Use Guide/Guía española para el uso rápido ∫ Carga de la batería Luz indicadora de carga [CHARGE] A Encendida: Carga en curso Apagada: Carga completada 1 Conecte el cable de CA al adaptador de CA y a la toma de CA. 2 Inserte la batería en el adaptador de CA alineando las flechas. ∫ Insertar la batería Meta la batería insertándola en la dirección señalada en la figura.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 166 ページ Para encender el dispositivo ２０１０年２月２３日 火曜日 午前１０時３４分 Toque y suelte la pantalla táctil para seleccionar el icono o la imagen. A El indicador de estado se ilumina. Para apagar el dispositivo ∫ Selección del idioma 1) 2) B El indicador de estado se apaga. ∫ Selección del modo Utilizando el selector de modo, cambie el modo a , o . ∫ Seleccionar un medio para grabar 1) 2) Modo de grabación de fotografías (l 37) Cambie el modo a Seleccione el menú.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 167 ページ ∫ Grabación de películas 1) 2) 3) Cambie el modo a . Abra el monitor LCD o extienda el visor. Para tomar una imagen pulse el botón a tope. ２０１０年２月２３日 火曜日 午前１０時３４分 ≥ Puede visualizarse la página siguiente (anterior) tocando / . 5) Seleccione la operación de reproducción tocando el icono de operación. 0h00m00s F A Icono de funcionamiento ∫ Reproducción de película/ fotografía 1) 2) Cambie el modo a .
HDC-TM700&HS700P&PC-VQT2M75_mst.book 168 ページ ２０１０年２月２３日 火曜日 午前１０時３４分 Panasonic Consumer Electronics Company, Division of Panasonic Corporation of North America One Panasonic Way, Secaucus, NJ 07094 Panasonic Canada Inc.
