HDCHS100P-VQT1T93_ENG.book 1 ページ ２００８年７月１４日 月曜日 午後１時３６分 Operating Instructions High Definition Video Camera Model No. HDC-HS100P/PC Before connecting, operating or adjusting this product, please read the instructions completely. Spanish Quick Use Guide is included. Guía para rápida consulta en español está incluida. For USA assistance, please call: 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.
HDCHS100P-VQT1T93_ENG.book 2 ページ ２００８年７月１４日 月曜日 午後１時３６分 Things You Should Know Date of Purchase Thank you for choosing Panasonic! You have purchased one of the most sophisticated and reliable products on the market today. Used properly, we’re sure it will bring you and your family years of enjoyment. Please take time to fill in the information on the right. The serial number is on the tag located on the underside of your camera.
HDCHS100P-VQT1T93_ENG.book 3 ページ ２００８年７月１４日 月曜日 午後１時３６分 THE FOLLOWING APPLIES ONLY IN THE U.S.A. FCC Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
HDCHS100P-VQT1T93_ENG.book 4 ページ ２００８年７月１４日 月曜日 午後１時３６分 Batteries 1 Battery pack (Lithium ion battery pack) ≥ Use the specified unit to recharge the battery pack. ≥ Do not use the battery pack with equipment other than the specified unit. ≥ Do not get dirt, sand, liquids, or other foreign matter on the terminals. ≥ Do not touch the plug terminals (i and j) with metal objects. ≥ Do not disassemble, remodel, heat or throw into fire. 2 Button-type battery (Lithium battery) ≥ Insert with poles aligned.
HDCHS100P-VQT1T93_ENG.book 5 ページ ２００８年７月１４日 月曜日 午後１時３６分 IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference. 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water.
HDCHS100P-VQT1T93_ENG.book 6 ページ ２００８年７月１４日 月曜日 午後１時３６分 Precautions USE & LOCATION WARNING ≥ TO AVOID SHOCK HAZARD ... Your camera and power supply should not be exposed to rain or moisture. Do not connect the power supply or operate your camera if it gets wet. Your camera has been designed for outdoor use, however it is not designed to sustain direct exposure to water, rain, sleet, snow, sand, dust, or a direct splashing from a pool or even a cup of coffee.
HDCHS100P-VQT1T93_ENG.book 7 ページ ２００８年７月１４日 IMPORTANT ∫ Carefully observe copyright laws Whatever you have recorded and created can be used for your personal entertainment only. Under copyright laws, other materials cannot be used without obtaining permission from the holders of the copyrights. ∫ Cards that you can use with this unit SD Memory Card and SDHC Memory Card ≥ 4 GB (or more) Memory Cards that do not have the SDHC logo are not based on SD Memory Card Specifications.
HDCHS100P-VQT1T93_ENG.book 8 ページ ２００８年７月１４日 月曜日 午後１時３６分 Contents Accessories ........................................ 10 Features .............................................. 11 Quick Guide ........................................ 12 Recording (Basic) Preparation Before using [1] Handling of HDD (Hard disk drive) ............................ 16 [2] Parts identification and handling.......................................... 17 Remote control ................................
HDCHS100P-VQT1T93_ENG.book 9 ページ ２００８年７月１４日 月曜日 Playback 午後１時３６分 With a PC Playback Before using [1] Motion picture playback ............... Creating still picture from motion picture .................................. Playing back motion pictures by date............................................. Intelligent scene selection ............... Repeat playback.............................. Resuming the previous playback..... [2] Still picture playback.....................
HDCHS100P-VQT1T93_ENG.book 10 ページ ２００８年７月１４日 月曜日 午後１時３６分 Accessories Check the accessories before using this unit.
HDCHS100P-VQT1T93_ENG.book 11 ページ ２００８年７月１４日 月曜日 午後１時３６分 Features ∫ Very clear high definition pictures This unit can record detailed high definition images to an SD card or HDD (hard disk drive).
HDCHS100P-VQT1T93_ENG.book 12 ページ ２００８年７月１４日 月曜日 午後１時３６分 Quick Guide ∫ Charging the battery ∫ Inserting/removing an SD card Charging lamp [CHARGE] A Lights up: Charging Goes off: Charging completed 1) Connect the AC cable to the AC adaptor and the AC outlet. 2) Insert the battery into the battery charger by aligning the arrows. ∫ Inserting the battery Install the battery by inserting it in the direction shown in the figure. A Insert the battery until it clicks and locks.
HDCHS100P-VQT1T93_ENG.book 13 ページ ２００８年７月１４日 月曜日 午後１時３６分 ∫ Language selection ∫ Recording motion pictures 1) Press the MENU button, then select [LANGUAGE] and press the cursor button. 2) Select [English] and press the cursor button. 1) Rotate the mode dial to select . 2) Set the LCD/EVF select switch to LCD or EVF. ≥ Open the LCD monitor when it is set to LCD. 3) Press the MENU button, then select [MEDIA SELECT] # [HDD] or [SD CARD] and press the cursor button.
HDCHS100P-VQT1T93_ENG.book 14 ページ ２００８年７月１４日 月曜日 午後１時３６分 ∫ Motion picture playback ∫ Still picture playback 1) Rotate the mode dial to select . 2) (When playing back from an SD card) Select [ ] (motion picture playback) B of [ ] (card playback) tab A with the cursor button. 1) Rotate the mode dial to select . 2) (When playing back from SD card) Select [ ] (still picture playback) B of [ ] (card playback) tab A with the cursor button.
HDCHS100P-VQT1T93_ENG.
HDCHS100P-VQT1T93_ENG.book 16 ページ Before using 1 ２００８年７月１４日 月曜日 午後１時３６分 Handling of HDD (Hard disk drive) The unit is equipped with the built-in 60 GB* HDD. While the HDD is capable of storing a large amount of data, there are a few things to look out for. When using this component, pay attention to the following points. * The usable HDD space is generally calculated as 1 GB=1,000,000,000 bytes. The capacities of this unit, PCs and software are expressed as 1 GB=1,024k1,024k1,024=1,073,741,824 bytes.
HDCHS100P-VQT1T93_ENG.book 17 ページ Before using 2 ２００８年７月１４日 月曜日 午後１時３６分 Parts identification and handling 3 456 7 8 9 2 10 11 1 20 19 AV/ 16 17 18 14 15 1 LCD monitor open 2 LCD monitor (l 35) Pull the LCD monitor out in the direction of the arrow with your fingers. 12 13 Due to limitations in LCD production technology, there may be some tiny bright or dark spots on the LCD monitor screen. However, this is not a malfunction and does not affect the recorded picture.
HDCHS100P-VQT1T93_ENG.book 18 ページ ２００８年７月１４日 7 8 9 10 11 12 13 14 Intelligent auto button [iA] (l 51) PRE-REC button [PRE-REC] (l 45) Menu button [MENU] (l 29) Battery holder (l 23) DC input terminal [DC IN] (l 25) USB terminal [ ] (l 100, 109, 119) HDMI mini connector [HDMI] (l 92, 97) Audio-video/headphone output terminal [AV/ ] (l 31, 56, 92, 108) ≥ Use the AV cable (only the supplied cable) or headphones. ≥ Setup the [AV JACK] in the menu when the headphones are used.
HDCHS100P-VQT1T93_ENG.book 19 ページ ２００８年７月１４日 30 Microphone terminal [MIC] ≥ A compatible plug-in powered microphone can be used as an external microphone. ≥ Audio will be stereo (2 ch) with the external microphone input. 月曜日 午後１時３６分 ≥ Make sure that the microphone cable is out of the way from the lens so it will not be recorded in the images. ≥ When the unit is connected with the AC adaptor, sometimes noise may be heard depending on the microphone type.
HDCHS100P-VQT1T93_ENG.book 20 ページ ２００８年７月１４日 42 Grip belt Adjust the length of the grip belt so that it fits your hand. 月曜日 午後１時３６分 Remote control 1 2 3 PHOTO EXT DISPLAY SHOT DATE/ TIME START/ STOP 7 ZOOM 8 VOL 4 1 2 3 43 Flip the belt. Adjust the length. Replace the belt.
HDCHS100P-VQT1T93_ENG.book 21 ページ ２００８年７月１４日 Install a button-type battery (supplied) 1 While pressing the stopper A, pull out the battery holder. 2 Set the buttontype battery with its (i) mark facing upward and then put the battery holder back in place. ≥ When the button-type battery runs down, replace it with a new battery (part number: CR2025). The battery should normally last about 1 year, however this depends on how frequently the unit is used.
HDCHS100P-VQT1T93_ENG.book 22 ページ Setup 1 ２００８年７月１４日 月曜日 午後１時３６分 Power supply ∫ About batteries that you can use with this unit The Panasonic battery that can be used with this unit is VW-VBG130/VW-VBG260/VW-VBG6. VW-VBG130/VW-VBG260/VW-VBG6 come with a function to check whether the battery and unit can be safely used together. ≥ To use the VW-VBG6 for this unit, the battery pack holder kit VW-VH04 (optional) is required.
HDCHS100P-VQT1T93_ENG.book 23 ページ ２００８年７月１４日 月曜日 午後１時３６分 ≥ We recommend using Panasonic batteries (l 10, 24, 148). ≥ If you use other batteries, we cannot guarantee the quality of this product. ≥ Do not heat or expose to flame. ≥ Do not leave the battery(ies) in an automobile exposed to direct sunlight for a long period of time with doors and windows closed. Inserting/removing the battery Install the battery by inserting it in the direction shown in the figure.
HDCHS100P-VQT1T93_ENG.
HDCHS100P-VQT1T93_ENG.book 25 ページ ２００８年７月１４日 月曜日 午後１時３６分 Battery capacity indication ≥ The display changes as the battery capacity reduces. # # # # If there is less than 3 minutes remaining, then will become red. If the battery discharges, then ( ) will flash. ≥ The remaining battery capacity is displayed when using the Panasonic battery that you can use for this unit. It may take time to display the remaining battery capacity. The actual time can vary depending on your actual use.
HDCHS100P-VQT1T93_ENG.book 26 ページ Setup 2 ２００８年７月１４日 月曜日 午後１時３６分 Preparation of SD cards This unit (an SDHC compatible device) is compatible with both SD Memory Cards and SDHC Memory Cards. You cannot use SDHC Memory Cards on devices that are only compatible with SD Memory Cards. When using an SDHC Memory Card on another device, confirm that the device supports the SDHC Memory Card.
HDCHS100P-VQT1T93_ENG.book 27 ページ ２００８年７月１４日 月曜日 午後１時３６分 Inserting/removing an SD card When using an SD card not from Panasonic, or one previously used on other equipment, for the first time on this unit, format the SD card. (l 91) When the SD card is formatted, all of the recorded data is deleted. Once the data is deleted, it cannot be restored. Copy valuable data onto a PC, DVD disc etc. before proceeding with the formatting.
HDCHS100P-VQT1T93_ENG.book 28 ページ 3 Setup ２００８年７月１４日 月曜日 午後１時３６分 Selecting a mode (Turning the unit on/off) Rotate the mode dial to switch to recording, playback or power OFF. Turn on the power by turning the mode dial to lock release button A. or while pressing the ≥ Rotate the mode dial while at the same time pressing in the lock release button if changing from OFF to another mode. ≥ Align with the status indicator B. The status indicator lights and the power turns on.
HDCHS100P-VQT1T93_ENG.book 29 ページ Setup 4 ２００８年７月１４日 月曜日 午後１時３６分 Using the menu screen Operate the displayed menu screens with the cursor button. MENU 1 Press the MENU button. MENU ≥ The menu displayed differs depending on the position of the mode dial. 2 C Current settings on menus ≥ Descriptions of submenus and current settings on menus are displayed scrolling at the bottom of the screen. 4 Select the top menu A and move the cursor button right or press the cursor button.
HDCHS100P-VQT1T93_ENG.book 30 ページ ２００８年７月１４日 月曜日 午後１時３６分 Language selection You can select the language on the screen display and the menu screen. 1 Press the MENU button, then select [LANGUAGE] and press the cursor button. 2 Select [English] and press the cursor button. Menu list Recording mode *1 It is not displayed when the AUTO/MANUAL switch is set to AUTO. *2 It is not displayed when the Intelligent auto mode is [ON]. *3 It will be displayed only when the [MEDIA SELECT] is set to [SD CARD].
HDCHS100P-VQT1T93_ENG.book 31 ページ ２００８年７月１４日 ∫ [SETUP] [CLOCK SET] (l 33) [DISPLAY] The screen indications are selected as shown in the illustration below. [OFF] [ON] 1h30m R 1h20m NOV 15 2008 NOV 15 2008 [DATE/TIME] (l 33) [DATE FORMAT] (l 33) [POWER SAVE] [OFF]: The power saving function is not activated. [5 MINUTES]: When about 5 minutes have passed without any operation, this unit automatically turns off to save battery life.
HDCHS100P-VQT1T93_ENG.book 32 ページ ２００８年７月１４日 月曜日 午後１時３６分 Playback mode *1 When the disc playback tab [ ] is selected while a DVD burner (optional) is connected, or when [INTEL. SCENE] (l 78) is selected, this does not appear. *2 Only when the disc playback tab [ ] is selected while a DVD burner (optional) is connected, this appears. *3 This appears only when the card playback tab [ ] is selected. *4 This appears only when the HDD playback tab [ ] is selected.
HDCHS100P-VQT1T93_ENG.book 33 ページ Setup 5 ２００８年７月１４日 月曜日 午後１時３６分 Setting date and time When the unit is turned on for the first time, a message asking you to set the date and time will appear. Select [YES] and perform steps 2 to 3 below to set the date and time. ¬ Rotate the mode dial to select 1 . [DATE] [D/T] Select the menu. (l 29) [SETUP] # [CLOCK SET] # [YES] NOV 15 2008 NOV 15 2008 12:34PM [OFF] 2 Select the date or time to be set, then set the desired value with the cursor button.
HDCHS100P-VQT1T93_ENG.book 34 ページ ２００８年７月１４日 月曜日 午後１時３６分 World time setting (Displaying the time of the travel destination) It is possible to display and record the time at the travel destination by selecting your home region and the travel destination. 1 Select the menu. (l 29) [BASIC] # [SET WORLD TIME] # [YES] ≥ If the clock is not set, adjust the clock to the current time. (l 33) ≥ When the [HOME] (your home region) is not set, such as the time for the initial settings, the message appears.
HDCHS100P-VQT1T93_ENG.book 35 ページ Setup 6 ２００８年７月１４日 月曜日 午後１時３６分 Adjusting LCD monitor/ viewfinder ≥ These settings will not affect the images actually recorded. ≥ When the [POWER LCD] or [LCD SET] is set, set the LCD/EVF select switch to LCD. When the [EVF SET] is set or the viewfinder field of view is corrected, set the LCD/EVF select switch to EVF.
HDCHS100P-VQT1T93_ENG.book 36 ページ ２００８年７月１４日 Adjusting the viewfinder field of view Adjust the focus by rotating the eyepiece corrector dial. Recording showing the contents to a partner ¬ Rotate the mode dial to select . Rotate the LCD monitor towards the lens side. ≥ Both the LCD monitor and the viewfinder are turned on during the face-to-face recording regardless of the position of the LCD/EVF select switch. ≥ The image is horizontally flipped as if you see a mirror image.
HDCHS100P-VQT1T93_ENG.
HDCHS100P-VQT1T93_ENG.book 38 ページ Recording (Basic) 1 ２００８年７月１４日 月曜日 午後１時３６分 Before recording ∫ Basic camera positioning ≥ When you are outdoors, record pictures with the sunlight behind you. If the subject is backlit, it will become dark in the recording. ≥ When recording, make sure your footing is stable and there is no danger of colliding with another person or object. 1 Hold the unit with both hands. 2 Put your hand through the grip belt. 3 Do not cover the microphones A.
HDCHS100P-VQT1T93_ENG.book 39 ページ ２００８年７月１４日 About auto mode AUTO MANUAL FOCUS/ZOOM Color balance (white balance) and focusing are adjusted automatically. Depending on the brightness of the subject etc., the aperture and shutter speed are automatically adjusted for an optimum brightness. (The shutter speed is adjusted to a maximum of 1/250 in recording mode.
HDCHS100P-VQT1T93_ENG.book 40 ページ ２００８年７月１４日 Quick start This unit will resume recording pause mode about 0.6 seconds after the LCD monitor is reopened. ≥ When in quick start standby mode about 70% of the power used in recording pause mode is being consumed, so the recording time will be reduced. ¬ Rotate the mode dial to select . 1 Set the LCD/EVF select switch to LCD. (l 35) 2 Select the menu. (l 29) [SETUP] # [QUICK START] # [ON] 3 Close the LCD monitor while the mode dial is set to .
HDCHS100P-VQT1T93_ENG.book 41 ページ Recording (Basic) 2 ２００８年７月１４日 月曜日 午後１時３６分 Recording motion pictures This unit records high definition images that are compatible with the AVCHD format on an SD card or HDD. Sound is recorded with the Dolby Digital 5.1 Creator. 0h00m00s R1h20m ≥ Rotate the mode dial while at the same time pressing in the lock release button A if changing from OFF to another mode. ≥ Align with the status indicator B. 1 Rotate the mode dial to select .
HDCHS100P-VQT1T93_ENG.book 42 ページ ２００８年７月１４日 月曜日 午後１時３６分 About the compatibility of the recorded motion pictures ≥ They are not compatible with devices other than those that support AVCHD. Images cannot be played with equipment that does not support AVCHD (ordinary DVD recorders). Confirm that your equipment supports AVCHD by referring to the operating instructions. ≥ There are some cases where the recorded motion pictures cannot be played back, even if the device supports AVCHD.
HDCHS100P-VQT1T93_ENG.book 43 ページ ２００８年７月１４日 ∫ Screen indications in the recording mode 0h00m00s HG R 1h20m 月曜日 午後１時３６分 A Recording mode B Remaining time left for recording (When the remaining time is less than 1 minute, [R 0h00m] flashes red.) C Recording time elapsed Each time the unit is put into recording pause, the counter display will be reset to “0h00m00s”. When motion picture recording stops suddenly For some SD cards, the message appears suddenly, and recording stops.
HDCHS100P-VQT1T93_ENG.book 44 ページ ２００８年７月１４日 月曜日 午後１時３６分 Recording modes/approximate recordable time Switch the picture quality of the motion pictures to be recorded. Select the menu.
HDCHS100P-VQT1T93_ENG.book 45 ページ ２００８年７月１４日 PRE-REC This prevents you from missing a shot. This allows recording of the pictures and sound to start approximately 3 seconds before the recording start/stop button is pressed. 1 Press the PRE-REC button. PRE-REC 月曜日 午後１時３６分 ≥ When the recording start/stop button is pressed, image shake and operation sound may be recorded.
HDCHS100P-VQT1T93_ENG.book 46 ページ Recording (Basic) 3 ２００８年７月１４日 月曜日 午後１時３６分 Recording still pictures The number of pixels recorded for still pictures is [ 2.1M 1920k1080] (16:9). Still pictures can also be recorded while recording motion pictures. ≥ Rotate the mode dial while at the same time pressing in the lock release button A if changing from OFF to another mode. ≥ Align with the status indicator B. 1 Rotate the mode dial to select . 2 Set the LCD/EVF select switch to LCD or EVF.
HDCHS100P-VQT1T93_ENG.book 47 ページ 5 Press the ２００８年７月１４日 button fully. 月曜日 午後１時３６分 ∫ About the screen indications when the button is pressed ≥ In order to take better still pictures, the screen will brighten when the button is fully pressed. To record still pictures clearly ≥ While recording motion pictures or during the PRE-REC operation, the following arrangements are applied so that motion picture recording takes preference over still picture recording.
HDCHS100P-VQT1T93_ENG.book 48 ページ ２００８年７月１４日 ∫ About the focus indication ≥ The focus indication indicates the status of the auto focus. ≥ The focus indication does not appear in manual focus mode. ≥ You can record still pictures even if the focus indication does not appear, but pictures may be recorded without being focused. ≥ The focus indication does not appear or has difficulty focusing in the following cases. jWhen the zoom magnification is high. jWhen the unit is shaken. jWhen the subject is moving.
HDCHS100P-VQT1T93_ENG.book 49 ページ Recording (Basic) 4 ２００８年７月１４日 午後１時３６分 Zoom in/out function The maximum optical zoom ratio is 12k. ¬ Rotate the mode dial to select . VOL W 月曜日 1.9 seconds. (The zoom speed does not vary when operating with the remote control.) When the zoom speed is high, the subject may not be focused easily. ≥ Zoom can also be operated using the multi manual ring.
HDCHS100P-VQT1T93_ENG.book 50 ページ Recording (Basic) 5 ２００８年７月１４日 月曜日 午後１時３６分 Optical image stabilizer function Optical image stabilizer can stabilize the image without decreasing the image quality as much. ¬ Rotate the mode dial to select . O.I.S. Optical image stabilizer button Press this button to switch on/off the image stabilizer function. ≥[ ] appears on the screen. O.I.S.: Optical Image Stabilizer ≥ This function’s default setting is [ON].
HDCHS100P-VQT1T93_ENG.book 51 ページ 6 Recording (Basic) ２００８年７月１４日 月曜日 午後１時３６分 Intelligent auto mode It will make an optimal setting automatically depending on the objects and recording conditions. ¬ Set the mode dial to , and set the AUTO/MANUAL switch to AUTO. (l 39) Intelligent auto button AUTO Press this button to switch on/off the Intelligent auto mode. MANUAL FOCUS/ZOOM It is automatically set to the following modes depending on the objects and recording conditions.
HDCHS100P-VQT1T93_ENG.book 52 ページ Recording (Advanced) 1 ２００８年７月１４日 月曜日 午後１時３６分 Recording functions of operation icons Select the operation icons to add different effects to the images to be recorded. ¬ Rotate the mode dial to select 1 . Press the cursor button, and icons will be displayed on the screen. ≥ The indication changes each time the cursor button is moved down. ≥ The operation icon appears or disappears each time the cursor button is pressed. 2 (e.g.
HDCHS100P-VQT1T93_ENG.book 53 ページ Tele macro*1 ２００８年７月１４日 月曜日 午後１時３６分 Headphone volume adjustment*3 *1 It is not displayed while recording. *2 It is not displayed when the Intelligent auto mode is [ON]. *3 It is displayed only when [AV JACK] is set to [HEADPHONE]. ≥ If you turn off the power or set the mode dial to , Help mode, MagicPix, Backlight compensation, self timer and tele macro functions are canceled. ≥ If you turn off the power, the fade function is canceled.
HDCHS100P-VQT1T93_ENG.book 54 ページ Function Self-timer ２００８年７月１４日 月曜日 午後１時３６分 Effect This is for recording still pictures using the timer. Each time the [ ] icon is selected, the indication changes by one setting in the following order: [Ø10] # [Ø2] # setting canceled Ø10: Records after 10 seconds Ø2: Records after 2 seconds ≥ When the button is pressed, a still picture is recorded after the [Ø10] or [Ø2] display and the recording lamp flashes for the time which has been set.
HDCHS100P-VQT1T93_ENG.book 55 ページ Function Automatic face detection ２００８年７月１４日 月曜日 午後１時３６分 Effect Brightness, quality, and focus are adjusted automatically so the face will be recorded clearly by detecting the face when it is recorded in the dark, such as when the light is shining from behind the objects. In the Automatic face detection mode, detected faces appear with frames. ≥ Up to 15 frames are indicated. Larger faces and faces nearer to the center of the screen take preference over others.
HDCHS100P-VQT1T93_ENG.book 56 ページ ２００８年７月１４日 Function Headphone volume adjustment Adjusts the volume of the headphone while recording. :Increases the volume :Decreases the volume ≥ Actual volume to be recorded does not change. Help mode: ≥ When the help mode is used, functions cannot be set. ≥ When the help mode is used, motion pictures and still pictures cannot be recorded.
HDCHS100P-VQT1T93_ENG.book 57 ページ ２００８年７月１４日 月曜日 午後１時３６分 Soft skin mode: ≥ If the background or anything else in the scene has colors similar to the skin color, they will also be smoothed. ≥ If the brightness is insufficient, the effect may not be clear. ≥ If you record a person in the distance, the face may not be recorded clearly. In this case, cancel soft skin mode or zoom in on the face (close-up) to record. MagicPix: ≥ Recorded scene is seen as if frames were missed.
HDCHS100P-VQT1T93_ENG.book 58 ページ Recording (Advanced) 2 ２００８年７月１４日 月曜日 午後１時３６分 Recording functions of menus ¬ Rotate the mode dial to select . ≥ Set to [OFF] when the menus are not used. Function Guide line Effect/Setting method You can check if the image is level while recording or playing back motion pictures and still pictures. The function can also be used to estimate the balance of the composition. A [HORIZONTAL] B [GRID1] C [GRID2] ≥ The Intelligent auto mode is set to [OFF].
HDCHS100P-VQT1T93_ENG.book 59 ページ Function Microphone setup [SURROUND]: Sound is recorded with 5.1 ch surround microphone. [ZOOM MIC]: Directivity of the microphone is synchronized with the zoom operation. Sounds near the front of the unit are recorded more clearly if you zoom in (close-up) and surrounding sounds are recorded more realistically if you zoom out (wide angle). [FOCUS MIC]: Directivity of the center is enhanced for recording audio near the front of the unit more clearly.
HDCHS100P-VQT1T93_ENG.book 60 ページ ２００８年７月１４日 Function HD hi-speed burst shooting 月曜日 午後１時３６分 Effect/Setting method 72 still pictures are recorded at a rate of 24 per second. Use this function to record an object with fast movement. ≥ The Intelligent auto mode is set to [OFF]. (l 51) 1 Select the menu. (l 29) [RECORD SETUP] # [HI-SPEED BURST] # [ON] 2 Press the button. ≥ Up to 72 still pictures can be taken in burst mode. ([ red during recording.
HDCHS100P-VQT1T93_ENG.book 61 ページ Function Built-in flash ２００８年７月１４日 月曜日 午後１時３６分 Effect/Setting method When the button is pressed, the flash is activated and the picture will be recorded. Use the built-in flash in order to record still pictures in dark places. Select the menu. (l 29) [RECORD SETUP] # [FLASH] # [AUTO] or [ON] ≥ This function’s default setting is [AUTO]. ≥ When the button is pressed halfway, the flash indicator will appear in the bottom left corner of the screen.
HDCHS100P-VQT1T93_ENG.book 62 ページ ２００８年７月１４日 Function Digital cinema color 月曜日 午後１時３６分 Effect/Setting method Recording motion pictures with more vivid colors, using x.v.Color™ technology. Select the menu. (l 29) [ADVANCED] # [Digital Cinema Color] # [ON] ≥ For more realistic colors, use an HDMI mini cable with a TV that supports the x.v.Color™. 24p digital cinema: ≥ [Digital Cinema Color] is turned [ON] and is not changeable.
HDCHS100P-VQT1T93_ENG.book 63 ページ ２００８年７月１４日 月曜日 午後１時３６分 Red eye reduction: ≥ The flash is activated 2 times. Do not move until the second flash is finished. ≥ Red eye phenomenon may appear depending on the recording conditions. Auto slow shutter: ≥ If the scene is low in brightness or contrast, the subject may not be focused in on. ≥ When the shutter speed becomes 1/30, the screen may be seen as if frames are missed and afterimages may appear.
HDCHS100P-VQT1T93_ENG.book 64 ページ Recording (Advanced) 3 ２００８年７月１４日 月曜日 午後１時３６分 Recording manually by setting the menu ¬ Rotate the mode dial to select . Set the AUTO/MANUAL switch to MANUAL. [ MNL ] appears on the screen. AUTO MANUAL FOCUS/ZOOM Scene mode When you record images in different situations, this mode automatically sets optimum shutter speeds and apertures. Select the menu.
HDCHS100P-VQT1T93_ENG.book 65 ページ ２００８年７月１４日 Sports mode ≥ For slow-motion playback or playback pause of recorded pictures, this mode helps diminish camera shake. ≥ During normal playback, the image movement may not look smooth. ≥ Color or brightness of the screen might change under fluorescent light, mercury light or sodium light, etc. ≥ You may see a band of light around an object that is shining very bright, or highly reflective. ≥ If the brightness is insufficient, the sports mode does not function.
HDCHS100P-VQT1T93_ENG.book 66 ページ ２００８年７月１４日 月曜日 午後１時３６分 Microphone level When recording, the input level from the built-in microphones and the external microphone terminal can be adjusted. ≥ Set the AUTO/MANUAL switch to MANUAL. (l 64) 1 Select the menu. (l 29) [RECORD SETUP] # [MIC LEVEL] # [SETr ] or [SET] ≥ Set to [AUTO] to return to normal setting. [AUTO]: AGC is activated, and the recording level is adjusted automatically. [SETr ]: The desired recording level can be set.
HDCHS100P-VQT1T93_ENG.book 67 ページ ２００８年７月１４日 月曜日 午後１時３６分 Picture adjustment Adjust the quality of the image while recording. Adjust by outputting to a TV while adjusting the quality of the image. ≥ Set the AUTO/MANUAL switch to MANUAL. (l 64) 1 Select the menu. (l 29) [ADVANCED] # [PICTURE ADJUST] # [YES] 2 3 Adjust the settings with the cursor button. Select the item with the cursor button and press the cursor button.
HDCHS100P-VQT1T93_ENG.book 68 ページ ２００８年７月１４日 月曜日 午後１時３６分 Luminance Displays the luminance level of the center of the screen (luminance display frame) in %. It makes the adjustment of the brightness of the object easier, by checking the luminance level of the object, when recording same object in different surroundings. Adjust the brightness using [IRIS]. (l 72) ≥ Set the AUTO/MANUAL switch to MANUAL. (l 64) Select the menu.
HDCHS100P-VQT1T93_ENG.book 69 ページ Recording (Advanced) 4 ２００８年７月１４日 月曜日 午後１時３６分 Recording manually using the multi manual ring Perform zoom operation, focus, white balance, shutter speed, and iris adjustments using the multi manual ring. ¬ Rotate the mode dial to select . Set the AUTO/MANUAL switch to MANUAL.
HDCHS100P-VQT1T93_ENG.book 70 ページ ２００８年７月１４日 月曜日 午後１時３６分 Zoom operation Zoom operation can be done using the multi manual ring. ≥ Move the AUTO/MANUAL switch from the MANUAL to FOCUS/ZOOM position, and display [ ]. (l 69) A side: Zoom by rotating the ring. Close-up recording (zoom in) A B side: Wide-angle recording (zoom out) ≥ The zoom speed varies depending on the speed to rotate the ring. B ≥ Auto focus is on when [ ] is displayed.
HDCHS100P-VQT1T93_ENG.book 71 ページ ２００８年７月１４日 月曜日 午後１時３６分 White balance The automatic white balance function may not reproduce natural colors depending on the scenes or lighting conditions. If so, you can adjust the white balance manually. ≥ Set the AUTO/MANUAL switch to MANUAL. (l 64) 1 Press the camera function button and select [WHITE BALANCE] by rotating the ring. (l 69) CAM FUNC 2 Enter the selection by pressing the camera function button. 3 Select the white balance mode by rotating the ring.
HDCHS100P-VQT1T93_ENG.book 72 ページ ２００８年７月１４日 月曜日 午後１時３６分 Manual shutter speed/iris adjustment Shutter Speed: Adjust it when recording fast-moving subjects. Iris: Adjust it when the screen is too bright or too dark. ≥ Set the AUTO/MANUAL switch to MANUAL. (l 64) 1 Press the camera function button and select [SHUTTER SPEED] or [IRIS] by rotating the ring. (l 69) CAM FUNC 2 3 Enter the selection by pressing the camera function button. Adjust by rotating the ring.
HDCHS100P-VQT1T93_ENG.
HDCHS100P-VQT1T93_ENG.book 74 ページ Playback 1 ２００８年７月１４日 月曜日 午後１時３６分 Motion picture playback A Lock release button B Align with the status indicator. ≥ Rotate the mode dial while at the same time pressing in the lock release button if changing from OFF to another mode. 1 2 Rotate the mode dial to select . (When playing back from an SD card) Select [ ] (motion picture playback) of [ ] (card playback) tab with the cursor button.
HDCHS100P-VQT1T93_ENG.book 75 ページ 3 ２００８年７月１４日 Select the scene to be played back and press the cursor button. G Thumbnail display H Previous page I Next page J Play mode select button K Scene number The selected scene is played back on the full screen, and the operation icon is automatically displayed on the screen. ≥ If 9 or more scenes have been recorded, the next (or previous) page can be displayed by moving the cursor button left and right or selecting / and then pressing the cursor button.
HDCHS100P-VQT1T93_ENG.book 76 ページ ２００８年７月１４日 Operating with the remote control Press the 6 or 5 button during playback. 月曜日 午後１時３６分 Operating with the remote control Press the E or D button during playback. VOL SEARCH PLAY SEARCH SEARCH PLAY SEARCH STILL ADV PAUSE STILL ADV STILL ADV PAUSE STILL ADV SKIP STOP SKIP ∫ Skip playback (to the start of a scene) (Operation is possible with the remote control only.) Press the : or 9 button during playback.
HDCHS100P-VQT1T93_ENG.book 77 ページ ２００８年７月１４日 Motion picture compatibility ≥ This unit is based on the AVCHD format. ≥ The video signal that can be played back on this unit is 1920k1080/60i, 1920k1080/24p or 1440k1080/60i. ≥ This unit may degrade or not play back motion pictures recorded or created on other products, and other products may degrade or not play back motion pictures recorded on this unit, even if the products support AVCHD. ≥ Sound will be heard only during normal playback.
HDCHS100P-VQT1T93_ENG.book 78 ページ ２００８年７月１４日 The scenes recorded on the date selected are displayed as thumbnails. ≥ Move the cursor button up or down to select the playback date. Move the cursor button left to select the last date of the previous month, and move it to the right to select the last date of the following month. 3 Select the scene to be played back, then press the cursor button. 月曜日 午後１時３６分 1 Select (Intelligent scene selection), then press the cursor button.
HDCHS100P-VQT1T93_ENG.book 79 ページ ２００８年７月１４日 月曜日 午後１時３６分 Repeat playback Playback of the first scene starts after playback of the last scene finishes. Select the menu. (l 29) [VIDEO SETUP] # [REPEAT PLAY] # [ON] The [ ] indication appears on the thumbnail and full screen views. ≥ All the scenes on the SD card or HDD are played back repeatedly. (When the play mode is set to , all the scenes on the selected date are played back repeatedly.
HDCHS100P-VQT1T93_ENG.book 80 ページ Playback 2 ２００８年７月１４日 月曜日 午後１時３６分 Still picture playback A Lock release button B Align with the status indicator. ≥ Rotate the mode dial while at the same time pressing in the lock release button if changing from OFF to another mode. 1 2 Rotate the mode dial to select . (When playing back from SD card) Select [ ] (still picture playback) of [ ] (card playback) tab with the cursor button.
HDCHS100P-VQT1T93_ENG.book 81 ページ 3 ２００８年７月１４日 Select the still picture to be played back and press the cursor button. G Play mode select button H Thumbnail display I Previous page J Next page K Still picture number L Folder/file name The selected still picture is played back on the full screen, and the operation icon is automatically displayed on the screen.
HDCHS100P-VQT1T93_ENG.book 82 ページ ２００８年７月１４日 Playing back still pictures by date Still pictures recorded on the same day can be played back in succession. 1 Select (By date), then press the cursor button. 2 Select the playback date, then press the cursor button. The still pictures recorded on the date selected are displayed as thumbnails. ≥ Move the cursor button up or down to select the playback date.
HDCHS100P-VQT1T93_ENG.book 83 ページ 1 Editing ２００８年７月１４日 月曜日 午後１時３６分 Deleting scenes/still pictures Deleted scenes/still pictures cannot be restored, so perform appropriate confirmation of the contents before proceeding with delete. ¬ Rotate the mode dial to select . To delete by confirming images being played back 0h00m00s Press the button while scenes or still pictures to be deleted are being played back. ≥ When the confirmation message appears, select [YES], then press the cursor button.
HDCHS100P-VQT1T93_ENG.book 84 ページ 3 ２００８年７月１４日 (Only when [SELECT] is selected in step 2) Select the scene/still picture to be deleted, then press the cursor button. 月曜日 午後１時３６分 When you stop deleting halfway Press the MENU button while deleting. ≥ The scenes or still pictures that have already been deleted when the deletion is canceled cannot be restored. To complete editing Press the MENU button. ≥ To unselect the scene/still picture, press the cursor button again.
HDCHS100P-VQT1T93_ENG.book 85 ページ Editing 2 ２００８年７月１４日 月曜日 午後１時３６分 Dividing a scene to delete To delete an unnecessary portion of a scene, first divide the scene and then delete the unnecessary portion. ¬ Select [ is set to 1 ] (motion picture playback) of [ . (l 74) Select the menu. (l 29) [EDIT SCENE] # [DIVIDE] # [SET] 2 Select the scene to be divided, then press the cursor button.
HDCHS100P-VQT1T93_ENG.book 86 ページ Editing 3 ２００８年７月１４日 月曜日 午後１時３６分 Protecting scenes/still pictures Scenes/still pictures can be protected so that they are not deleted by mistake. (Even if you protect some scenes/still pictures on an SD card or HDD, formatting the SD card or HDD will delete them.) ¬ Rotate the mode dial to select 1 . Select the menu. (l 29) [VIDEO SETUP] or [PICT. SETUP]# [SCENE PROTECT] # [YES] 2 Select the scene/still picture to be protected and then press the cursor button.
HDCHS100P-VQT1T93_ENG.book 87 ページ Editing 4 ２００８年７月１４日 月曜日 午後１時３６分 DPOF setting You can write the data selecting still pictures to be printed and the number of prints (DPOF data) onto the SD card. ¬ Select [ (l 80) ] (still picture playback) of [ ∫ What is DPOF? DPOF (Digital Print Order Format) is a format which allows the user of a digital camera to define which captured images on the SD card are to be printed, together with information on the number of copies they wish to print.
HDCHS100P-VQT1T93_ENG.book 88 ページ Editing 5 ２００８年７月１４日 月曜日 午後１時３６分 Copying between SD card and HDD Motion pictures and still pictures recorded with this unit can be copied between an SD card inserted in this unit and HDD. Confirming remaining capacity on the copy destination ≥ When copying to the HDD, it cannot be copied if there is not enough remaining capacity on the HDD.
HDCHS100P-VQT1T93_ENG.book 89 ページ 3 ２００８年７月１４日 Select the item and press the cursor button. 5 月曜日 午後１時３６分 (Only when [SELECT SCENES] is selected in step 4) Select the scene/still picture to be copied and press the cursor button. [VIDEO & PICTURE]: All scenes are copied in order of motion pictures, then still pictures. Proceed to step 7. [VIDEO]: Motion pictures are copied. [PICTURE]: Still pictures are copied.
HDCHS100P-VQT1T93_ENG.book 90 ページ ２００８年７月１４日 (Only when [SELECT DATE] is selected in step 4) Press the MENU button. MENU 7 When the confirmation message appears, select [YES], then press the cursor button. ≥ If more than 2 SD cards are necessary to copy, change the card following the instructions on the screen. 8 Press the MENU button when the copy complete message is displayed. ≥ The thumbnail view of the copy destination is indicated.
HDCHS100P-VQT1T93_ENG.book 91 ページ Editing 6 ２００８年７月１４日 月曜日 午後１時３６分 Formatting SD cards and HDD Please be aware that if an SD card or HDD is formatted, then all the data recorded on the SD card or HDD will be erased. Back up important data on a PC, DVD disc etc. ∫ Formatting SD cards ¬ Set the mode dial to and set the [MEDIA SELECT] to [SD CARD] (l 41), or set to and select [ ] tab. (l 74) Select the menu.
HDCHS100P-VQT1T93_ENG.book 92 ページ With a TV 1 ２００８年７月１４日 月曜日 午後１時３６分 Watching Video/Pictures on your TV The motion pictures and still pictures recorded on this unit can be played back on a TV screen. Confirm the terminals on your TV and use a cable compatible with the terminals. Image quality may vary with the connected terminals. 1 High quality 2 HDMI terminal 3 Component terminal 4 Video terminal ≥ Use the AC adaptor to free you from worrying about the battery running down.
HDCHS100P-VQT1T93_ENG.book 93 ページ ２００８年７月１４日 月曜日 午後１時３６分 ≥ Check that the plugs are inserted as far as they go. ≥ We recommend using Panasonic HDMI mini cables (optional). Part numbers: RP-CDHM15 (1.5 m/4.9 feet), RP-CDHM30 (3.0 m/9.8 feet) ≥ Do not use any other component cables except the supplied one. ≥ The component terminal is for outputting images only so be sure to also connect the AV cable. (It is not necessary to connect the yellow plug.
HDCHS100P-VQT1T93_ENG.book 94 ページ ２００８年７月１４日 月曜日 午後１時３６分 ∫ To watch images with a 16:9 aspect ratio on a regular TV (4:3) ∫ To display the on-screen information on the TV When playing back motion pictures or still pictures recorded on this unit with a 16:9 aspect ratio on a TV with a 4:3 aspect ratio, the images on the screen may be squeezed horizontally. In this case, change the menu setting to play back the pictures in the original aspect ratio.
HDCHS100P-VQT1T93_ENG.book 95 ページ ２００８年７月１４日 月曜日 午後１時３６分 Connecting with a HDMI mini cable What is HDMI? HDMI is the interface for digital devices. When this unit is connected to a HDMI compatible device, the image and audio can be output with a digital signal. If you connect this unit to a HDMI compatible high definition TV and then play back the recorded high definition images, you can enjoy them in high resolution with high quality sound.
HDCHS100P-VQT1T93_ENG.book 96 ページ ２００８年７月１４日 月曜日 午後１時３６分 Listening in 5.1 channel sound You still can listen to the 5.1 channel sound recorded from the internal microphones when this unit is connected to the 5.1 channel compatible AV amplifier or TV using the HDMI mini cable. Please read the AV amplifier and TV operating instructions for how to connect this unit to the AV amplifier and TV.
HDCHS100P-VQT1T93_ENG.book 97 ページ With a TV 2 ２００８年７月１４日 月曜日 午後１時３６分 Playback using VIERA Link™ (HDAVI Control™) What is the VIERA Link? ≥ VIERA Link™ is a new name for EZ Sync™. ≥ This function allows you to use your remote control for the Panasonic TV for easy operations when this unit has been connected to a VIERA Link compatible device using a HDMI mini cable (optional) for automatic linked operations. (Not all operations are possible.
HDCHS100P-VQT1T93_ENG.book 98 ページ ２００８年７月１４日 月曜日 午後１時３６分 ≥ It is recommended to connect this unit to an HDMI terminal other than the HDMI1 if there are 2 or more HDMI input terminals on the TV. ≥ VIERA Link must be activated on the connected TV. (Read the operating instructions of the TV for how to set etc.) ≥ If you are not using VIERA Link, set [VIERA Link] to [OFF].
HDCHS100P-VQT1T93_ENG.
HDCHS100P-VQT1T93_ENG.book 100 ページ With other products 1 ２００８年７月１４日 月曜日 午後１時３６分 Connecting a DVD burner to copy to/play back a disc Motion pictures or still pictures recorded with this unit can be copied to a DVD disc by connecting a DVD burner VW-BN1 (optional) to this unit using a Mini AB USB Connection Cable (supplied with VW-BN1). The copied DVD disc can also be played back. ≥ Please read the operating instructions of the DVD burner for how to use it.
HDCHS100P-VQT1T93_ENG.book 101 ページ 1 ２００８年７月１４日 月曜日 午後１時３６分 Connect the AC adaptor (supplied with VW-BN1) to the DVD burner. ≥ You cannot supply power to the DVD burner from this unit. 2 Connect this unit to the AC adaptor and set the mode dial to 3 Connect this unit to the DVD burner with the Mini AB USB Connection Cable (supplied with VW-BN1). . A Mini AB USB Connection Cable (supplied with VW-BN1) B DVD burner (optional) ≥ Insert the plugs as far as they will go.
HDCHS100P-VQT1T93_ENG.book 102 ページ ２００８年７月１４日 月曜日 午後１時３６分 Copying to discs Motion pictures are copied as AVCHD format high definition images. ≥ We recommend preparing the necessary number of discs that can be used for copying (l 100), and spare discs. ≥ You cannot copy from multiple SD cards to 1 disc. (You can additionally copy only to a DVD-RAM.) ≥ Motion pictures and still pictures cannot both be copied to a single disc. ≥ Confirm that auto protection is [ON] before copying data.
HDCHS100P-VQT1T93_ENG.book 103 ページ ２００８年７月１４日 step 4) Press the DISC COPY button. Select the date you want to copy and press the cursor button. DISC COPY 7 6 (Only when [SELECT SCENES] is selected in step 4) Select [NEXT] and press the cursor button. 午後１時３６分 (Only when [SELECT DATE] is selected in step 4) (Only when [SELECT DATE] is selected in ≥ When the cursor button is pressed again, the selected date will be canceled. ≥ Up to 99 dates can be selected in succession.
HDCHS100P-VQT1T93_ENG.book 104 ページ ２００８年７月１４日 月曜日 午後１時３６分 Important Notice ≥ When connecting an optional DVD burner and this unit for copying a disc, do not insert a disc with recorded motion pictures into devices that do not support the AVCHD format. In some cases the disc may get stuck in the device. The disc will not play back on devices that do not support the AVCHD format.
HDCHS100P-VQT1T93_ENG.book 105 ページ ２００８年７月１４日 月曜日 午後１時３６分 ∫ To copy the data on a new disc successively after confirming the contents of the copied disc by playing it back Press the DISC COPY button on the playback thumbnail view to display the selection screen in Step 2, so that you can copy data again. DISC COPY ≥ The disc that was copied to can be played back by connecting this unit and a DVD burner.
HDCHS100P-VQT1T93_ENG.book 106 ページ ２００８年７月１４日 月曜日 午後１時３６分 Playing back the copied disc ≥ Only discs that have been copied by connecting this unit to the DVD burner or where motion pictures have been recorded in AVCHD format can be played back. It may not be possible to play back discs recorded on other devices. 1 Connect this unit to the DVD burner to prepare for playback. (l 100) ≥ When playing back on a TV, connect this unit to the TV with HDMI mini cable, component cable or AV cable.
HDCHS100P-VQT1T93_ENG.book 107 ページ ２００８年７月１４日 月曜日 午後１時３６分 Managing the copied disc (Formatting, Auto protect, Displaying disc information) ≥ Connect this unit to the DVD burner and then select [PLAY DISC]. (l 100) ∫ Formatting discs This is for initializing DVD-RAM and DVD-RW discs. ≥ Select [ ] tab. Please be aware that if a disc is formatted, then all the data recorded on the disc will be erased. Back up important data on a PC etc. Select the menu.
HDCHS100P-VQT1T93_ENG.book 108 ページ With other products 2 ２００８年７月１４日 月曜日 午後１時３６分 Dubbing images onto other video device Images played back on this unit can be dubbed onto a DVD recorder or video device. ≥ Images are dubbed in standard quality. ≥ Use the AC adaptor to free you from worrying about the battery running down. Change the video input on the video device and TV that this unit is connected to. AV/ 1 ≥ The channel set will differ depending on the terminal to which the unit is connected.
HDCHS100P-VQT1T93_ENG.book 109 ページ With other products 3 ２００８年７月１４日 月曜日 午後１時３６分 With a printer (PictBridge) To print pictures by directly connecting this unit to the printer, use a printer compatible with PictBridge. (Read the operating instructions for the printer.) PictBridge is an industry standard from the Camera & Imaging Products Association (CIPA) for direct printing. It allows images to be printed directly from digital cameras to a printer, without having to connect the camera to a PC.
HDCHS100P-VQT1T93_ENG.book 110 ページ ２００８年７月１４日 月曜日 午後１時３６分 ≥ To cancel the setting, set the number of prints to [0]. ≥ Up to 8 files can be set in succession by repeating steps 4 and 5. [ 6 10 Select [PRINT] # [YES] and Press the MENU button to display the PictBridge menus. ]: No frame print [ ]: Frame print ≥ You cannot set page layouts not supported on the printer. press the cursor button to print the pictures. MENU 7 Select the date print setting on [DATE PRINT].
HDCHS100P-VQT1T93_ENG.
HDCHS100P-VQT1T93_ENG.book 112 ページ Before using 1 Software required CD-ROM (supplied): HD Writer 2.
HDCHS100P-VQT1T93_ENG.book 113 ページ Software required ２００８年７月１４日 月曜日 午後１時３６分 Available function Standard Windows picture viewer or a commercially available picture viewer Playing back on a PC Windows Explorer Copying still pictures to a PC (l 120) Data type Still picture Refer to page 122 if using a Macintosh. *1 Refer to the operating instructions of HD Writer 2.6E (PDF file) for details on how to use it. *2 Compatible media are SD card and discs (DVD-RAM, DVD-RW, DVD-R and DVD-R DL).
HDCHS100P-VQT1T93_ENG.book 114 ページ ２００８年７月１４日 月曜日 午後１時３６分 End User License Agreement Before opening the CD-ROM package, please read the following. You (“Licensee”) are granted a license for the Software defined in this End User Software Agreement (“Agreement”) on condition that you agree to the terms and conditions of this Agreement. If Licensee does not agree to the terms and conditions of this Agreement, promptly return the Software to Matsushita Electric Industrial Co., Ltd.
HDCHS100P-VQT1T93_ENG.book 115 ページ Before using 2 ２００８年７月１４日 月曜日 午後１時３６分 Operating environment ≥ Even if the system requirements mentioned in these operating instructions are fulfilled, some PCs cannot be used. ≥ A CD-ROM drive is necessary to install the supplied software applications. (A compatible DVD writer drive and media are necessary for writing to a DVD.) ≥ Operation is not guaranteed in the following cases.
HDCHS100P-VQT1T93_ENG.book 116 ページ ２００８年７月１４日 月曜日 午後１時３６分 Necessary software Windows Vista: DirectX 10 Windows XP/2000: DirectX 9.0c ≥ If you install the software on a PC that is not compatible with DirectX 9.0c, the PC may not work properly. If you are unsure whether or not your PC is compatible, contact the maker of your PC. Sound DirectSound Support Interface USB port [Hi-Speed USB (USB 2.
HDCHS100P-VQT1T93_ENG.book 117 ページ Setup 1 ２００８年７月１４日 月曜日 午後１時３６分 Installation When installing the software, log on to your PC as the Administrator (or with a user name with equivalent authorization) or with the user name for a standard user account. (If you do not have authorization to do this, consult your manager.) ≥ Before starting the installation, close all applications that are running. ≥ Do not perform any other operations on your PC while the software is being installed.
HDCHS100P-VQT1T93_ENG.book 118 ページ 5 ２００８年７月１４日 After the installation is complete, restrictions 6 月曜日 午後１時３６分 Click [Finish]. are displayed. Check the contents, then close the window. The PC must be rebooted for the application to work. ∫ Uninstalling HD Writer 2.6E Follow the steps below to uninstall any software applications that you no longer require. 1 Select [start] # ([Settings] #) [Control Panel] # [Add or Remove Programs (Applications)] or [Uninstall a program].
HDCHS100P-VQT1T93_ENG.book 119 ページ Setup 2 ２００８年７月１４日 月曜日 午後１時３６分 Connection and recognition After the software applications are installed, this unit must be connected to the PC and be correctly recognized by the PC. ≥ Remove the supplied CD-ROM from your PC. A USB cable (supplied) 1 Connect this unit to the AC adaptor. 2 Turn on the unit. ≥ This function is available in all modes. 3 Connect this unit to a PC. The USB function selection screen will appear.
HDCHS100P-VQT1T93_ENG.book 120 ページ ２００８年７月１４日 月曜日 午後１時３６分 About the PC display When the unit is connected to a PC, it is recognized as an external drive. ≥ [Removable Disk] (Example: ) is displayed in [My Computer (Computer)]. Example folder structure of an SD card: Removable Disk DCIM 100CDPFQ 101CDPFR 102CDPFS MISC PRIVATE AVCHD AVCHDTN BDMV IISVPL We recommend using HD Writer 2.6E to copy or write back motion picture data recorded on an SD card.
HDCHS100P-VQT1T93_ENG.book 121 ページ Using with a PC 1 ２００８年７月１４日 月曜日 午後１時３６分 Starting HD Writer 2.6E ≥ When using HD Writer 2.6E on Windows XP/2000, log on to your computer as Administrator (or with a login name equally authorized). If you log on with a login name other than Administrator, you cannot use the applications. ≥ When using HD Writer 2.6E on Windows Vista, log on to your computer as Administrator (or with a login name equally authorized) or with the user name for a standard user account.
HDCHS100P-VQT1T93_ENG.book 122 ページ Using with a PC 2 ２００８年７月１４日 月曜日 午後１時３６分 If using Macintosh ≥ HD Writer 2.6E is not available for Macintosh. ∫ Operating environment for the card reader function (mass storage) PC Macintosh OS Mac OS X 10.4 Mac OS X 10.5 CPU PowerPC G5 (1.8 GHz or higher) Intel Core Duo Intel Core Solo RAM 64 MB or more Interface USB port ≥ Even if the system requirements mentioned in these operating instructions are fulfilled, some PCs cannot be used.
HDCHS100P-VQT1T93_ENG.
HDCHS100P-VQT1T93_ENG.
HDCHS100P-VQT1T93_ENG.
HDCHS100P-VQT1T93_ENG.book 126 ページ 1 ２００８年７月１４日 DPOF already set (to more than 1) (l 87) Protected motion pictures/still pictures (l 86) 2.1M Number of recording pixels for still pictures (l 48) 1920k1080 The picture size is not displayed for still pictures recorded with other products that have different picture sizes from the sizes shown above.
HDCHS100P-VQT1T93_ENG.book 127 ページ Indications 2 ２００８年７月１４日 月曜日 午後１時３６分 Messages Major confirmation/error messages to be indicated on the LCD monitor or the viewfinder in text. RECOMMEND DATA BACK UP PERIODICALLY. We recommend backing up important recorded motion pictures and still pictures periodically to a PC, DVD disc etc. to protect it. This message does not indicate that there is a problem with this unit. HDD BACKUP RECOMMENDED. There is a possible problem with the HDD.
HDCHS100P-VQT1T93_ENG.book 128 ページ ２００８年７月１４日 月曜日 午後１時３６分 THIS BATTERY CANNOT BE USED. ≥ Use a battery that is compatible with this unit. (l 22) If using a Panasonic battery compatible with this unit, remove the battery and then insert it again. If the message appears even after repeating this several times, this unit needs repair. Detach the power and contact consumer support. (l 153, 154) Do not attempt to repair it by yourself.
HDCHS100P-VQT1T93_ENG.book 129 ページ ２００８年７月１４日 月曜日 午後１時３６分 About recovery If faulty management information is found when the HDD or an SD card is accessed, one of the following messages may appear. Be sure to follow directions in the messages. (Repairing may take time depending on the error.) CONTROL DATA ERROR HAS BEEN DETECTED. (SD CARD) CONTROL DATA ERROR HAS BEEN DETECTED. (HDD) THUMBNAIL DATA ERROR IS DETECTED.
HDCHS100P-VQT1T93_ENG.book 130 ページ Helpful hints 1 ２００８年７月１４日 月曜日 午後１時３６分 Functions that cannot be used simultaneously Some functions in this unit are disabled or cannot be selected due to the unit’s specifications. Functions Motion picture recording Conditions which disable the functions ≥ When the HD hi-speed burst shooting mode is on PRE-REC Microphone setup ≥ An external microphone is used.
HDCHS100P-VQT1T93_ENG.
HDCHS100P-VQT1T93_ENG.book 132 ページ Helpful hints 2 Problem This unit cannot be turned on. This unit does not stay on long enough. Battery runs down quickly. ２００８年７月１４日 月曜日 午後１時３６分 Troubleshooting Check points ≥ Charge the battery using the AC adaptor. (l 22) ≥ The battery protection circuit may have operated. Attach the battery to the AC adaptor for 5 to 10 seconds. If the unit still cannot be used, the battery is faulty. ≥ Make sure the LCD monitor is opened.
HDCHS100P-VQT1T93_ENG.book 133 ページ Problem This unit cannot be operated though it is turned on. This unit does not operate normally. ２００８年７月１４日 月曜日 午後１時３６分 Check points ≥ The unit will not operate unless the LCD monitor is opened when the LCD/EVF select switch is set to LCD. ≥ Turn on the power again. If normal conditions are not restored yet, remove the battery or AC adaptor, wait about 1 minute and then reconnect the battery or AC adaptor. Then about 1 minute later, turn on the power again.
HDCHS100P-VQT1T93_ENG.book 134 ページ ２００８年７月１４日 月曜日 午後１時３６分 Problem Check points Color balance of images is strange when recording in a place such as a gymnasium. ≥ In a place with multiple light sources, such as a gymnasium or a hall, the auto white balance function may not operate properly. In this case, set the white balance setting to [ (Indoor mode2)]. If you cannot record clearly with the [ (Indoor mode2)], set it to [ (Manual adjustment mode)].
HDCHS100P-VQT1T93_ENG.book 135 ページ ２００８年７月１４日 月曜日 午後１時３６分 Problem Check points If the SD card is inserted in another device, it is not recognized. ≥ Check that the device is compatible with the capacity or type of SD card (SD Memory Card/SDHC Memory Card) that you inserted. Refer to the operating instructions of the device for details. The indication disappears. ≥ No operation can be performed on this unit when it is connected to a PC. ≥ Turn off the power to this unit.
HDCHS100P-VQT1T93_ENG.book 136 ページ Problem ２００８年７月１４日 月曜日 午後１時３６分 Check points VIERA Link does not work. ≥ Connect with a HDMI mini cable (optional). (l 97) ≥ Press the MENU button, then select [SETUP] # [VIERA Link] # [ON] with the cursor button. (l 97) ≥ Depending on HDMI terminal of the TV, the input channel may not switch automatically. In this case, use the remote control for the TV to switch input. (For details on how to switch input, please read the operating instructions for the TV.
HDCHS100P-VQT1T93_ENG.book 137 ページ ２００８年７月１４日 月曜日 午後１時３６分 ∫ If scenes do not change smoothly when played back on another device The images may be still for several seconds at the joins between the scenes if the following operations are performed when multiple scenes have been continuously played back using another unit. ≥ Just how smoothly the scenes will be played back depends on the playback unit.
HDCHS100P-VQT1T93_ENG.book 138 ページ ２００８年７月１４日 月曜日 午後１時３６分 ∫ When PRE-REC was used for recording 1 Normal recording 2 PRE-REC recording A The picture momentarily stops at the end of the last scene that was recorded normally before PREREC recording. ∫ When the recording mode was changed from HA/HG/HX to HE or from HE to HA/HG/HX A The picture momentarily stops where the scenes switch between HA/HG/HX and HE modes.
HDCHS100P-VQT1T93_ENG.book 139 ページ ２００８年７月１４日 月曜日 午後１時３６分 ∫ When deleting scenes ∫ Example 1: Deleting scenes midway through a sequence of scenes. 1 Scene to be deleted A The image will be still for several seconds wherever a scene was deleted. B The images of consecutive scenes where they are no deletions are played back smoothly one after another. ∫ Example 2: When recording again after having deleted the last scene. 1 2 A B Scene to be deleted A new scene is recorded here.
HDCHS100P-VQT1T93_ENG.book 140 ページ ２００８年７月１４日 月曜日 午後１時３６分 Cautions for use About this unit The unit and the SD card become warm during use. This is not a malfunction. Keep the High Definition Video Camera as far away as possible from electromagnetic equipment (such as microwave ovens, TVs, video games etc.). ≥ If you use the High Definition Video Camera on top of or near a TV, the pictures and sound on the High Definition Video Camera may be disrupted by electromagnetic wave radiation.
HDCHS100P-VQT1T93_ENG.book 141 ページ ２００８年７月１４日 When disposing of or giving away this unit, note that: ≥ Formatting and deletion simply change the file management information and cannot be used to completely erase the data in HDD of this unit. The data can be recovered using commercially available software or the like. ≥ We recommend that you physically format the HDD before disposing of or giving away this unit.
HDCHS100P-VQT1T93_ENG.book 142 ページ ２００８年７月１４日 adaptor 1 m (3.3 feet) or more away from the radio. ≥ When using the AC adaptor, it may generate whirring sounds. However, this is normal. ≥ After use, be sure to disconnect the AC adaptor. (If it is left connected, a minute amount of current is consumed.) ≥ Always keep the electrodes of the AC adaptor and battery clean. LCD monitor/viewfinder ≥ When the LCD monitor gets dirty, wipe it with a dry soft cloth.
HDCHS100P-VQT1T93_ENG.book 143 ページ ２００８年７月１４日 月曜日 午後１時３６分 Explanation of terms Automatic white balance White balance adjustment recognizes the color of light and adjusts so the white color will become a purer white. The unit determines the hue of light that comes through the lens, thereby judging the recording condition, and selects the closest hue setting. This is called automatic white balance adjustment.
HDCHS100P-VQT1T93_ENG.book 144 ページ ２００８年７月１４日 Recording a subject behind dirty or dusty window The subject behind the window will not be focused because the focus is on the dirty window. Similarly, when recording something on the opposite side of a road with heavy traffic, a vehicle that happens to pass by may be brought into focus.
HDCHS100P-VQT1T93_ENG.book 145 ページ ２００８年７月１４日 月曜日 午後１時３６分 Specifications High Definition Video Camera Information for your safety Power source: Power consumption: DC 9.3 V (When using AC adaptor) DC 7.2 V (When using battery) Recording: 6.7 W Signal system 1080/60i Recording format AVCHD format compliant Image sensor 1/6z 3MOS image sensor Total: 610 Kk3 Effective pixels: Motion picture: 520 Kk3 Still picture: 520 Kk3 Lens Auto Iris, F1.8 to F2.8 Focal length: 2.95 mm to 35.
HDCHS100P-VQT1T93_ENG.book 146 ページ ２００８年７月１４日 月曜日 午後１時３６分 HDMI mini connector audio output level 5.1 ch (AC3)/2 ch (Linear PCM) MIC input j70 dBV (Mic sensitivity j50 dB equivalent, 0 dB=1 V/Pa, 1 kHz) (Stereo mini jack) USB Reader/writer function: SD card: Read/Write (No copyright protection support) HDD: Read only Hi-Speed USB (USB 2.0), USB terminal Type Mini AB PictBridge-compliant Flash Available range: Approx. 1.0 m to 2.5 m (3.3 feet to 8.
HDCHS100P-VQT1T93_ENG.book 147 ページ ２００８年７月１４日 月曜日 午後１時３６分 Still pictures Recording media SD Memory Card: 8 MB, 16 MB, 32 MB, 64 MB, 128 MB, 256 MB, 512 MB, 1 GB, 2 GB (FAT12 and FAT16 system corresponding) SDHC Memory Card: 4 GB, 6 GB, 8 GB, 12 GB, 16 GB, 32 GB (FAT32 system corresponding) HDD: 60 GB Compression JPEG (Design rule for Camera File system, based on Exif 2.2 standard), DPOF corresponding Picture size 1920k1080 Refer to page 48 for the number of recordable pictures.
HDCHS100P-VQT1T93_ENG.book 148 ページ ２００８年７月１４日 月曜日 午後１時３６分 Optional accessories Accessory No.
HDCHS100P-VQT1T93_ENG.book 149 ページ Accessory No.
HDCHS100P-VQT1T93_ENG.book 150 ページ ２００８年７月１４日 月曜日 午後１時３６分 Accessory Order Form (For USA Customers) Please photocopy this form when placing an order. 1. Model # 2. Items Ordered Accessory # Description Price Each Quantity Total Price Subtotal Your State & Local Sales Tax Shipping & Handling 6.95 Total Enclosed 3. Method of payment (check one) Check of Money Order enclosed (NO C.O.D.
HDCHS100P-VQT1T93_ENG.book 151 ページ ２００８年７月１４日 月曜日 午後１時３６分 Request for Service Notice (USA Only) Please photocopy this form when making a request for service notice, in the unlikely event this product needs service. Request for Service Notice: •Please include your proof of purchase. (Failure to do so will delay your repair.) •To further speed your repair, please provide an explanation of what is wrong with the unit and any symptom it is exhibiting.
HDCHS100P-VQT1T93_ENG.book 152 ページ ２００８年７月１４日 月曜日 午後１時３６分 Limited Warranty (For USA Customers) PANASONIC CONSUMER ELECTRONICS COMPANY, DIVISION OF PANASONIC CORPORATION OF NORTH AMERICA One Panasonic Way, Secaucus, New Jersey 07094 PANASONIC PUERTO RICO, INC. Ave. 65 de Infantería, Km. 9.
HDCHS100P-VQT1T93_ENG.book 153 ページ ２００８年７月１４日 月曜日 午後１時３６分 Customer Services Directory Service in Canada: As per Servicentre listed in Canadian warranty information on page 154. Obtain Product Information and Operating Assistance; locate your nearest Dealer or Service Center; purchase Parts and Accessories; or make Customer Service and Literature requests by visiting our Web Site at: http://www.panasonic.com/consumersupport or, contact us via the web at: http://www.panasonic.
HDCHS100P-VQT1T93_ENG.book 154 ページ ２００８年７月１４日 月曜日 午後１時３６分 Warranty (For Canadian Customers) Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 PANASONIC PRODUCT – LIMITED WARRANTY Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship and agrees to remedy any such defect for a period as stated below from the date of original purchase.
HDCHS100P-VQT1T93_ENG.book 155 ページ ２００８年７月１４日 月曜日 午後１時３６分 Index ∫ Numerics ∫G 24p digital cinema . . . . . . . . . . . . . . . . . . . . .58 5.1 channel . . . . . . . . . . . . . . . . . . . . . . . . . .96 Gain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 Grip belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Guide line . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 ∫A AC adaptor . . . . . . . . . . . . . . . . . . . .22, 25, 141 Accessory shoe . . . . .
HDCHS100P-VQT1T93_ENG.book 156 ページ ２００８年７月１４日 月曜日 午後１時３６分 ∫P ∫Z PictBridge . . . . . . . . . . . . . . . . . . . . . . . . . .109 Picture adjustment . . . . . . . . . . . . . . . . . . . . .67 Playing back motion pictures by date . . . . . .77 Playing back still pictures by date . . . . . . . . .82 Power LCD . . . . . . . . . . . . . . . . . . . . . . . . . .35 Power save . . . . . . . . . . . . . . . . . . . . . . . . . .31 PRE-REC . . . . . . . . . . . . . . . . . . . . . . . . . . . .45 Protect . .
HDCHS100P-VQT1T93_ENG.book 157 ページ ２００８年７月１４日 月曜日 午後１時３６分 Spanish Quick Use Guide/Guía española para el uso rápido ∫ Carga de la batería Luz indicadora de carga [CHARGE] A Encendida: Carga en curso Apagada: Carga completada ≥ Gire el selector del modo mientras pulsa al mismo tiempo el botón de desbloqueo si cambia de OFF a otro modo. ≥ Alinee con el indicador de estado B. ≥ Para apagar la unidad, coloque el selector del modo en OFF.
HDCHS100P-VQT1T93_ENG.book 158 ページ ２００８年７月１４日 ≥ Para extraer la tarjeta SD, presione en el centro de la tarjeta SD y luego tire de ella derecho hacia fuera. 4) Cierre firmemente la tapa de la tarjeta SD. ≥ Ciérrela firmemente hasta que dispare. ∫ Selección del idioma 1) Pulse el botón MENU, seleccione [LANGUAGE] y, luego, pulse el botón cursor. 2) Seleccione [Español] y pulse el botón cursor. ∫ Modo de ayuda En el modo de ayuda se describen los iconos de funcionamiento que aparecen.
HDCHS100P-VQT1T93_ENG.book 159 ページ ２００８年７月１４日 月曜日 午後１時３６分 ∫ Reproducción de películas ∫ Reproducción de fotografías 1) Gire el selector de modo para seleccionar . 2) (Cuando reproduce la tarjeta SD) Seleccione [ ] (reproducción de películas) B de la ficha [ ] (reproducción de tarjeta) A usando el botón cursor. 1) Gire el selector de modo para seleccionar .
HDCHS100P-VQT1T93_ENG.book 160 ページ ２００８年７月１４日 月曜日 午後１時３６分 Panasonic Consumer Electronics Company, Division of Panasonic Corporation of North America One Panasonic Way, Secaucus, NJ 07094 Panasonic Puerto Rico, Inc. Ave. 65 de Infantería, Km. 9.5, San Gabriel Industrial Park, Carolina, Puerto Rico 00985 Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 P VQT1T93 F0708TD0 ( 2000 ) © 2008 Matsushita Electric Industrial Co., Ltd.
