CoverPP_Eng.fm 1 ページ ２００７年１月１５日 月曜日 午前１１時７分 Operating Instructions High Definition Video Camera Model No. HDC-DX1P/PC Before connecting, operating or adjusting this product, please read the instructions completely. Spanish Quick Use Guide is included. Guía para rápida consulta en español está incluida. For USA assistance, please call: 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo For Canadian assistance, please call: 1-800-561-5505 or visit us at www.
LSQT1093ENG.book 2 ページ ２００７年１月１５日 月曜日 午前９時２３分 Things You Should Know Thank you for choosing Panasonic! You have purchased one of the most sophisticated and reliable products on the market today. Used properly, we’re sure it will bring you and your family years of enjoyment. Please take time to fill in the information on the right. The serial number is on the tag located on the underside of your camera. Be sure to retain this manual as your convenient camera information source.
LSQT1093ENG.book 3 ページ ２００７年１月１５日 月曜日 午前９時２３分 CLASS 1 LASER PRODUCT IEC 60825-1:2001 CAUTION This product contains a laser diode of higher class than 1. To ensure continued safety, do not remove any covers or attempt to gain access to the inside of the product. Refer all servicing to qualified personnel. THE FOLLOWING APPLIES ONLY IN THE U.S.A. FCC Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
LSQT1093ENG.book 4 ページ ２００７年１月１５日 月曜日 午前９時２３分 Batteries 1) Battery pack (Lithium ion battery pack) ≥Use the specified unit to recharge the battery pack. ≥Do not use the battery pack with equipment other than the specified unit. ≥Do not get dirt, sand, liquids, or other foreign matter on the terminals. ≥Do not touch the plug terminals (i and j) with metal objects. ≥Do not disassemble, remodel, heat or throw into fire. 2) Button-type battery (Lithium battery) ≥Insert with poles aligned.
LSQT1093ENG.book 5 ページ ２００７年１月１５日 月曜日 午前９時２３分 IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference. 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth.
LSQT1093ENG.book 6 ページ ２００７年１月１５日 月曜日 Precautions USE & LOCATION WARNING ≥TO AVOID SHOCK HAZARD ... Your camera and power supply should not be exposed to rain or moisture. Do not connect the power supply or operate your camera if it gets wet. Your camera has been designed for outdoor use, however it is not designed to sustain direct exposure to water, rain, sleet, snow, sand, dust, or a direct splashing from a pool or even a cup of coffee.
LSQT1093ENG.book 7 ページ ２００７年１月１５日 月曜日 ª Indemnity concerning recording content The manufacturer shall in no event be liable for the loss of recordings due to malfunction or defect of this unit, its accessories or recordable media. IMPORTANT ª Carefully observe copyright laws Whatever you have recorded and created can be used for your personal entertainment only. Under copyright laws, other materials cannot be used without obtaining permission from the holders of the copyrights. ≥SDHC Logo is a trademark.
LSQT1093ENG.book 8 ページ ２００７年１月１５日 月曜日 午前９時２３分 Contents Quick Guide .......................................... 10 Recording Before using Before recording .................................. 48 Recording motion pictures ................. 50 Recording modes/recordable time available for the motion picture ...... 52 Recording still pictures (JPEG) .......... 53 Number of pixels and picture quality for still picture recording..... 56 Various recording functions ...............
LSQT1093ENG.book 9 ページ ２００７年１月１５日 月曜日 午前９時２３分 Contents Editing With a computer Editing scenes...................................... 80 Before using with a computer........... 102 Deleting scenes........................................80 Protecting scenes.....................................81 What you can do with a computer.......... 102 Operating environment .......................... 102 Editing still pictures............................. 82 Connection and recognition .............
LSQT1093ENG.book 10 ページ ２００７年１月１５日 Quick Guide ª Charging the battery 月曜日 午前９時２３分 ª How to turn on the power While pressing the lock release button A, set the mode dial to or PC . PC OF , F A 1 Connect the AC cable to the AC ª How to turn off the power Set the mode dial to OFF. adaptor and the AC outlet. 2 Put the battery on the battery Push the battery against the battery holder and slide it until it clicks. PC mount by aligning the mark, and then securely plug it in.
LSQT1093ENG.book 11 ページ ２００７年１月１５日 ª Inserting/removing a card 1 Set the mode dial to OFF. 2 Open the LCD monitor and then insert/remove the SD card into/ from the card slot. 月曜日 午前９時２３分 ª Record the still picture on an SD card 1 Rotate the mode dial to select . PC OF F 2 Press the PHOTO SHOT button ª Record motion pictures onto a disc 1 Rotate the mode dial to select halfway in order to adjust focusing. (For auto focusing only) .
LSQT1093ENG.book 12 ページ ２００７年１月１５日 月曜日 午前９時２３分 ª Playback of motion pictures on a disc ª Playback of still pictures on an SD card 1 Rotate the mode dial to select 1 Rotate the mode dial to select . . PC PC then left to select the [ ] (motion picture playback) tab. OFF OFF 2 Press the cursor button up and 2 Press the cursor button up and then right to select the [ picture playback) tab. A A A Motion picture playback tab 3 Select the scene to be played back. 4 Press the cursor button.
LSQT1093ENG.book 13 ページ ２００７年１月１５日 月曜日 午前９時２３分 Before using Before using Features of the High Definition Video Camera Very clear high definition pictures This unit is an AVCHD format video camera for recording highly detailed high definition images to an 8 cm (3z) DVD disc. You can watch images in high-resolution HD video if you connect this unit and a high definition TV and then play back the images.
LSQT1093ENG.book 14 ページ ２００７年１月１５日 月曜日 午前９時２３分 Before using Watching High Definition images If you connect this unit and a high definition TV A with a HDMI cable (optional) B and then play back the pictures, you can enjoy watching them in high definition. A B ≥If you connect this unit to a TV that does not support high definition, the images will be standard picture quality.
LSQT1093ENG.book 15 ページ ２００７年１月１５日 月曜日 午前９時２３分 Before using Listening in 5.1 channel surround sound This unit has 5 internal microphones and a Dolby Digital 5.1 Creator so you can record sound with presence that is even closer to the actual sound. The low bass area is sent to the 0.1 channel subwoofer and you can playback sound with three-dimensional presence if you connect to a device that is compatible with the 5.1 surround system. ≥The 5 mounted internal microphones give better directivity.
LSQT1093ENG.book 16 ページ ２００７年１月１５日 Before using Accessories Check the accessories before using this unit.
LSQT1093ENG.
LSQT1093ENG.book 18 ページ ２００７年１月１５日 月曜日 午前９時２３分 Before using 6 11 12 7 13 14 8 15 16 9 17 10 18 6) Speaker 7) Viewfinder (l 23) Due to limitations in LCD production technology, there may be some tiny bright or dark spots on the viewfinder screen. However, this is not a malfunction and does not affect the recorded picture. 8) 9) 10) 11) 12) 13) 14) 15) 16) 17) 18) LCD monitor open latch (l 23) Battery holder (l 31) DC input terminal [DC IN 7.
Eng_body.fm 19 ページ ２００７年１月１６日 火曜日 午前１０時４８分 Before using 20 21 19 23 22 24 19) Internal microphones (5.1 channel support) 20) Zoom lever [W/T] (In recording mode) (l 57) Volume lever [sVOLr] (In playback mode) (l 76) 21) Photoshot button [ ] (l 53) 22) Eyepiece corrector knob (l 47) 23) Shoe cover (l 22) 24) Accessory shoe (l 22) ≥Accessories, such as a video DC light/VW-LDC102 (optional), are attached here.
LSQT1093ENG.book 20 ページ ２００７年１月１５日 月曜日 午前９時２３分 Before using 27 29 30 28 31 32 33 35 36 37 34 38 A/V COMPONENT MIC 27) Reset button [RESET] (l 122) 28) LCD monitor (l 23) Due to limitations in LCD production technology, there may be some tiny bright or dark spots on the LCD monitor screen. However, this is not a malfunction and does not affect the recorded picture.
LSQT1093ENG.book 21 ページ ２００７年１月１５日 月曜日 午前９時２３分 Before using 39 41 42 40 39) 40) 41) 42) Disc compartment (l 35) Grip belt (l 22) Outlet Cooling fan (inlet) ≥About the cooling fan: The cooling fan rotates to prevent the internal temperature rising. Take care not to cover the inlet and outlet when using this unit.
Eng_body.fm 22 ページ ２００７年１月１６日 火曜日 午前１０時５０分 Before using Using grip belt Accessory shoe Adjust the belt length so it fits your hand. Adjust the belt length and the pad position. The video DC light/VW-LDC102 (optional) should be mounted here. 1 Open the shoe cover. 2 3 1 2 Connect to the accessory shoe. 1 Flip the belt. 2 Adjust the length. 3 Replace the belt. Lens hood Rotate the lens hood counter-clockwise A to remove it.
LSQT1093ENG.book 23 ページ ２００７年１月１５日 月曜日 午前９時２３分 Before using Using the LCD monitor Using the viewfinder You can record the image while viewing it on the LCD monitor. Pull out the viewfinder. 1 Place your finger on LCD monitor open latch and pull the LCD monitor out in the direction of the arrow. ≥The brightness of the viewfinder and the field of view can be adjusted. (l 47) ≥It can open up to 90o. 2 Adjust the angle of the LCD monitor as desired.
LSQT1093ENG.book 24 ページ ２００７年１月１５日 月曜日 午前９時２３分 Before using Using the remote control 1 2 3 PHOTO EXT DISPLAY SHOT DATE/ TIME START/ STOP 7 ZOOM SEARCH PLAY SEARCH STILL ADV PAUSE STILL ADV SKIP STOP SKIP MENU 5 6 Install the supplied button-type battery in the remote control before using it. 1 While pressing the stopper A, pull out the battery holder.
LSQT1093ENG.book 25 ページ ２００７年１月１５日 月曜日 午前９時２３分 Before using ª Remote control usable range The distance between the remote control and the unit’s remote control sensor A: Within approx. 5 m (16 feet) Angle: Approx. 10o up and 15o down, left, and right A ≥The remote control is intended for indoor operation. Outdoors or under strong light, the unit may not operate properly even within the usable ranges.
LSQT1093ENG.book 26 ページ ２００７年１月１５日 月曜日 午前９時２３分 Before using Discs that can be used on this unit DIsc type DVD-RAM 8 cm (3q) Single sided/ double sided DVD-RW 8 cm (3q) Single sided/ double sided DVD-R 8 cm (3q) Single sided/ double sided DVD-R DL 8 cm (3q) Dual layer on single side (DVD-RAM Ver. 2.1) [DVD-RW Ver. 1.1/ 2X-SPEED (2X/ 1X)] (DVD-R for General Ver. 2.0) (DVD-R for DL Ver. 3.
LSQT1093ENG.book 27 ページ ２００７年１月１５日 月曜日 午前９時２３分 Before using ≥Still pictures cannot be recorded on a disc with this unit. ≥You cannot record or play continuously from one side of the disc to the other when using a double sided disc. You will need to eject the disc and turn it over. ≥Discs inserted in a holder, cartridge, or caddy case cannot be used. Always remove bare discs from these containers prior to use. ≥It is recommended that you use Panasonic discs.
LSQT1093ENG.book 28 ページ ２００７年１月１５日 月曜日 午前９時２３分 Before using When using brand-new DVD-RAM or DVD-RW When using DVD-RAM or DVD-RW, format the disc. When a brand-new DVD-RAM or DVD-RW is inserted in this unit, the screen shown in the illustration may be displayed. When inserting a disc recorded on another device When a DVD-RAM or a DVD-RW recorded on another device is inserted in this unit, the screen shown in the illustration may be displayed.
Eng_body.fm 29 ページ ２００７年１月１６日 火曜日 午前１０時５２分 Before using Cards that you can use with this unit Card type SD Memory Card SDHC Memory Card Capacity 8 MB, 16 MB, 32 MB, 64 MB, 128 MB, 256 MB, 512 MB, 1 GB, 2 GB 4 GB Indication in these instructions (SD) This unit (an SDHC compatible device) is compatible with both SD Memory Cards and SDHC Memory Cards. You can use SDHC Memory Cards on devices that are compatible with them.
LSQT1093ENG.book 30 ページ ２００７年１月１５日 月曜日 午前９時２３分 Before using Disc and card handling ª How to hold a disc or card Do not touch the recorded surface or the terminal surface. ª When inserting/removing a disc Do not allow fingerprints or dirt to get on the recording/playback side of the disc. ≥If there are scratches or dirt (e.g. dust or fingerprints) on the recording/playback side of the disc, normal recording/playback may not be possible and the following may occur: – Recording/playback is not possible.
LSQT1093ENG.book 31 ページ ２００７年１月１５日 月曜日 午前９時２３分 Setup Setup Charging the battery When this unit is purchased, the battery is not charged. Charge the battery before using this unit. ≥If the DC cable is connected to the AC adaptor, then the battery will not charge. Remove the DC cable from the AC adaptor. ≥The Panasonic battery that can be used with this unit is VW-VBG260. Other Panasonic batteries will not work. (l 32) ≥Battery charging time (l 32) ≥We recommend using Panasonic batteries (VW-VBG260).
LSQT1093ENG.book 32 ページ ２００７年１月１５日 月曜日 午前９時２３分 Setup Charging time and recordable time ª About batteries that you can use with this unit The Panasonic battery that can be used with this unit is VW-VBG260. VW-VBG260 comes with a function to check whether the battery and unit can be safely used together. ≥Batteries made by other companies which have been certified by Panasonic may be used with this unit, but we offer no guarantee as to the quality, performance or safety of such batteries.
LSQT1093ENG.book 33 ページ ２００７年１月１５日 月曜日 午前９時２３分 Setup ≥The recordable times will vary depending on the status of use. These times are approximations. The recordable time will become shorter in the following cases: – When you use both the viewfinder and the LCD monitor simultaneously while rotating the LCD monitor frontward to record yourself, using the 0 Lux MagicPix function, etc. – When you use this unit with the LCD monitor lit up by pressing the POWER LCD button.
LSQT1093ENG.book 34 ページ ２００７年１月１５日 月曜日 午前９時２３分 Setup Selecting a mode (Turning the unit on/off) Recording mode (l 50, 53) Use this to record motion pictures on a disc and still pictures on an SD card. Rotate the mode dial to switch to recording, playback, PC connection or power OFF. ≥Rotate the mode dial slowly. Playback mode (l 74, 78) Use this to play back motion pictures recorded on a disc and still pictures recorded on an SD card.
LSQT1093ENG.book 35 ページ ２００７年１月１５日 月曜日 午前９時２３分 Setup How to turn the power on and off with the LCD monitor/viewfinder When the mode dial is set to , the power can be turned on and off with the LCD monitor and the viewfinder. ª To turn on the power Open the LCD monitor or extend the viewfinder. Inserting/removing a disc When inserting or removing the disc, fit the charged battery pack or connect the AC adaptor to the unit. The cover of the disc compartment will not open unless the unit is powered.
LSQT1093ENG.book 36 ページ ２００７年１月１５日 月曜日 午前９時２３分 Setup Inserting disc Removing disc Fit the disc onto the spindle in the center. While pressing down on the spindle, grasp the edge of the disc and gently lift it out. B A C A Recording/playback side B Pickup lens C Press until it clicks. ≥Be careful not to touch the recording/playback side of the disc when inserting/removing it. 4 Push the section marked PUSH CLOSE on the cover of the disc compartment to close the cover.
LSQT1093ENG.book 37 ページ ２００７年１月１５日 月曜日 午前９時２３分 Setup ª Identifying recording/playback sides of disc A D DV -RAM / SIDE A B A “SIDE A” mark B The opposite side is the “SIDE A” recording/ playback side. Single sided disc/dual layer on single side disc: The recording/playback side is opposite to the labelled side. Double sided disc: The “SIDE A” recording/playback side is the side opposite the side with the “SIDE A” mark. The “SIDE B” recording/playback side is the side with the “SIDE A” mark.
LSQT1093ENG.book 38 ページ ２００７年１月１５日 月曜日 午前９時２３分 Setup Inserting/removing an SD card ª Card access lamp Be sure to set the mode dial to OFF before inserting/removing an SD card. If the SD card is inserted or removed while the power is on, this unit may malfunction or the data recorded on the SD card may be lost. 1 Set the mode dial to OFF. ≥Check that the status indicator has gone off. 2 Open the LCD monitor and then insert/remove the SD card into/ from the card slot.
LSQT1093ENG.book 39 ページ ２００７年１月１５日 月曜日 午前９時２３分 Setup How to use the cursor button This unit has a cursor button A for selecting functions, performing operations, etc. so it is easy to operate this unit with one hand. PC OF F Operations during recording ¬ Rotate the mode dial to select . 1 Press the center of the cursor button, and icons will be displayed on the screen.
LSQT1093ENG.book 40 ページ ２００７年１月１５日 Setup Operations during playback ¬ Rotate the mode dial to select . 1 Move the cursor button up, down, left or right to select the scene to be played back and press the cursor button. The selected scene is played back on the full screen. The operation icon is automatically displayed on the screen. 2 Move the cursor button up, down, left or right to operate. ≥The operation icon appears or disappears each time the center of the cursor button is pressed.
LSQT1093ENG.book 41 ページ ２００７年１月１５日 月曜日 午前９時２３分 Setup About the operation icons displayed in each mode Recording mode Icon Direction (2/3) (3/3) Page Backlight compensation 59 2 Fade 60 1 Help mode 43 3 MagicPix/0 Lux MagicPix 61 2 Soft skin mode 62 3 (1/3) Function 1 Tele macro 62 Ø 3 Self-timer recording 63 ß 2 Flash 64 1 Red eye reduction 65 Set the AUTO/MANUAL/FOCUS switch to MANUAL.
LSQT1093ENG.
LSQT1093ENG.book 43 ページ ２００７年１月１５日 月曜日 午前９時２３分 Setup To exit the help mode Help mode Press the MENU button or select [END]. The help mode explains the operation icons displayed when the AUTO/MANUAL/FOCUS switch is set to AUTO in recording mode. ¬ Rotate the mode dial to select . 1 Press the cursor button to display the icon. ≥When the help mode is used, functions cannot be set. ≥When the help mode is used, motion pictures and still pictures cannot be recorded.
LSQT1093ENG.book 44 ページ ２００７年１月１５日 月曜日 午前９時２３分 Setup Using the menu screen Refer to “Menu list” (l 108) for information about the menus. 1 While stopped, press the MENU button. 4 Move the cursor button up or down in order to select the submenu item. C MENU C Current settings on menus The menu displayed differs depending on the position of the mode dial. ≥Do not switch the mode dial when the menu is displayed. 5 Move the cursor button right or press the cursor button.
LSQT1093ENG.book 45 ページ ２００７年１月１５日 月曜日 午前９時２３分 Setup To exit the menu screen Press the MENU button. MENU ≥The menu screen does not appear during recording or playing. You cannot start other operations while the menu screen appears. Operating with remote control The menu screen transition is the same as when the buttons on the main unit are used. 1 Press the MENU button.
LSQT1093ENG.book 46 ページ ２００７年１月１５日 月曜日 午前９時２３分 Setup Changing the date and time display style Press the MENU button, then select [SETUP] # [DATE/TIME] # desired display style and press the cursor button. ≥You can also show or change the date and time display by repeatedly pressing the DATE/TIME button on the remote control. [DATE] Switching the language You can switch the language on the screen display or the menu screen. 1 Press the MENU button, then select [LANGUAGE] and press the cursor button.
LSQT1093ENG.book 47 ページ ２００７年１月１５日 月曜日 午前９時２３分 Setup Adjusting LCD monitor/ viewfinder Adjusting the brightness and color level ª In order to increase the brightness of the entire LCD monitor Press the POWER LCD button. 1 Press the MENU button, then POWER LCD select [SETUP] # [LCD SET] or [EVF SET] # [YES] and press the cursor button. 2 Move the cursor button up or down to select the item to be adjusted.
LSQT1093ENG.book 48 ページ ２００７年１月１５日 月曜日 午前９時２３分 Recording Recording Before recording Basic camera positioning 1 3 B 5 2 A 4 C 6 D 1 Hold the unit with both hands. 2 Put your hand through the grip belt. 3 Do not cover inlet A or outlet B of the cooling fan with your hand as it will prevent heat release. If heat builds up inside the unit, it could be damaged. 4 Do not cover the microphones C or the sensors D with your hands. 5 Keep your arms near your body. 6 Slightly open your legs.
LSQT1093ENG.book 49 ページ ２００７年１月１５日 月曜日 午前９時２３分 Recording ª About auto mode Set the AUTO/MANUAL/FOCUS switch to AUTO, and color balance (white balance) and focusing will be adjusted automatically. AUTO MANUAL FOCUS – Automatic white balance (l 127) – Auto focus (l 128) Depending on the brightness of the subject etc., the aperture and shutter speed are automatically adjusted for an optimum brightness. (The shutter speed is adjusted to a maximum of 1/250 in recording mode.
LSQT1093ENG.book 50 ページ ２００７年１月１５日 月曜日 午前９時２３分 Recording Recording motion pictures (RAM) (-RW) (-R) (-R\DL) To end the recording Press the recording start/stop button again to pause recording. Record motion pictures onto a disc. ≥This unit is compatible with the 16:9 aspect ratio of a wide-screen TV and images are recorded in high definition video. 1 Rotate the mode dial to select . PC OF F The lens cover opens automatically. 2 Open the LCD monitor or extend the viewfinder.
LSQT1093ENG.book 51 ページ ２００７年１月１５日 月曜日 午前９時２３分 Recording ª Screen indications in the disc recording mode A B C The ACCESS/PC lamp lights immediately after recording finishes. While it lights, the disc is rotating and disc information is being recorded. If you run while holding the unit or swing it, the recorded images may be distorted so do not strongly shake or cause impact to it.
LSQT1093ENG.book 52 ページ ２００７年１月１５日 月曜日 午前９時２３分 Recording Recording modes/recordable time available for the motion picture (RAM) (-RW) (-R) (-R\DL) Switch the picture quality of the motion pictures to be recorded. ¬ Rotate the mode dial to select . Press the MENU button, then select [VIDEO] # [REC MODE] # desired item and press the cursor button. Approximate recordable time for 1 disc Disc type HF HN HE (RAM) (-RW) (-R) Approx. 14 min Approx. 21 min Approx. 31 min (-R\DL) Approx.
LSQT1093ENG.book 53 ページ ２００７年１月１５日 月曜日 午前９時２３分 Recording Recording still pictures (JPEG) Focus indication: (SD) Record the still picture on an SD card. ≥This number of recording pixels for still pictures is compatible with the 16:9 aspect ratio of a wide-screen TV. They are recorded at [1920k1080]. 1 Rotate the mode dial to select . A B A Focus indication B Focus area ± (The white lamp flashes.): Focusing ¥ (The green lamp lights up.): When in focus No mark: When focusing is unsuccessful.
LSQT1093ENG.book 54 ページ ２００７年１月１５日 月曜日 午前９時２３分 Recording ≥The PHOTO SHOT button on the remote control cannot be pressed halfway. ≥If the [PICT. QUALITY] is set to [ ], mosaic-pattern noise may appear on a playback image depending on the picture content. ≥While this unit accesses the SD card ( is displayed/the access lamp is lit), do not perform the following operations. The SD card or the recorded data may be damaged. – Turn the unit off. – Remove the SD card. – Operate the mode dial.
LSQT1093ENG.book 55 ページ ２００７年１月１５日 月曜日 午前９時２３分 Recording Switching the shutter effect on/off You can add a shutter sound when recording still pictures. Press the MENU button, then select [PICTURE] # [SHTR EFFECT] # [ON] or [OFF] and press the cursor button. About simultaneous recording (recording still pictures while recording motion pictures) You can record still pictures on an SD card even while recording motion pictures on a disc.
LSQT1093ENG.book 56 ページ ２００７年１月１５日 月曜日 午前９時２３分 Recording Number of pixels and picture quality for still picture recording (SD) Picture quality Press the MENU button, then select [PICTURE] # [PICT. QUALITY] # desired item and press the cursor button. MENU : Still pictures with a high picture quality are recorded. : Priority is given to the number of still pictures recorded. Still pictures are recorded in normal picture quality.
LSQT1093ENG.book 57 ページ ２００７年１月１５日 月曜日 午前９時２３分 Recording Various recording functions ≥If the zoom lever is pushed to the end, you can zoom from 1k up to 12k in as fast as approx. 1.8 seconds. ≥When the zoom speed is high, the subject may not be focused easily. Zoom in/out function (RAM) (-RW) (-R) (-R\DL) (SD) You can zoom in up to 12k optically. ¬ Rotate the mode dial to select . Move the zoom lever.
LSQT1093ENG.book 58 ページ ２００７年１月１５日 月曜日 午前９時２３分 Recording Digital zoom function (RAM) (-RW) (-R) (-R\DL) (SD) If the zoom magnification exceeds 12k, then the digital zoom function will be activated. The maximum magnification provided by the digital zoom can be switched. ¬ Rotate the mode dial to select . Press the MENU button, then select [BASIC] # [D.ZOOM] # desired item and press the cursor button.
LSQT1093ENG.book 59 ページ ２００７年１月１５日 月曜日 午前９時２３分 Recording Recording yourself (RAM) (-RW) (-R) (-R\DL) (SD) You can record yourself while viewing the LCD monitor. You can record persons in front of the unit while showing them the image. ¬ Rotate the mode dial to select . Rotate the LCD monitor towards the lens side. Backlight compensation function This is for preventing a backlit subject from being darkened.
LSQT1093ENG.book 60 ページ ２００７年１月１５日 月曜日 午前９時２３分 Recording 4 Press the recording start/stop Fade in/fade out function button. (Fade out) (RAM) (-RW) (-R) (-R\DL) Fade in: The image and audio gradually appear. Fade out: The image and audio gradually disappear. ¬ Rotate the mode dial to select . 1 Press the cursor button. Then move the cursor button down to display the icon shown in the illustration. The image/audio gradually disappears. After the image/audio completely disappears, recording stops.
LSQT1093ENG.book 61 ページ ２００７年１月１５日 月曜日 午前９時２３分 Recording 3 MagicPix function This allows recording in dark locations. (RAM) (-RW) (-R) (-R\DL) (SD) (In the case of 0 Lux MagicPix function) Extend the viewfinder and rotate the LCD monitor towards the lens side. This function allows you to record color subjects in dark locations to stand out against the background. Attach this unit to a tripod, and you can record images free from vibration. ≥Recorded scene is seen as if frames were missed.
LSQT1093ENG.book 62 ページ ２００７年１月１５日 月曜日 午前９時２３分 Recording Soft skin mode Tele macro function This makes skin colors appear softer for a more attractive appearance. This is for close-ups bringing only what you want to record into focus. (RAM) (-RW) (-R) (-R\DL) (SD) This is more effective if you record a subject more closely from the torso up. ¬ Rotate the mode dial to select . 1 Press the cursor button. Then move the cursor button down to display the icon shown in the illustration.
LSQT1093ENG.book 63 ページ ２００７年１月１５日 月曜日 午前９時２３分 Recording To stop the timer midway through Self-timer recording (SD) You can record still pictures on an SD card using the timer. ¬ Rotate the mode dial to select . 1 Press the cursor button. Then move the cursor button down to display the icon shown in the illustration. Press the MENU button. (The self-timer setting is canceled.) ≥The self-timer is canceled if the power is turned off or the mode dial is operated.
LSQT1093ENG.book 64 ページ ２００７年１月１５日 月曜日 午前９時２３分 Recording When the flash is not used Built-in flash Set the flash to [FLASH OFF]. (SD) Use the built-in flash in order to record still pictures in dark places. ¬ Rotate the mode dial to select . 1 Press the cursor button. Then move the cursor button down to display the icon shown in the illustration. 2 Move the cursor button left to select [ß].
LSQT1093ENG.book 65 ページ ２００７年１月１５日 月曜日 午前９時２３分 Recording Red eye reduction function Reduces the phenomena where human eyes become red from flashes. 1 Press the cursor button. Then move the cursor button down to display the icon shown in the illustration. 2 Move the cursor button right to select [ Image stabilizer function This is for reducing image shakes during recording. (RAM) (-RW) (-R) (-R\DL) (SD) Reduces the image shaking due to hand movement when recording.
LSQT1093ENG.book 66 ページ ２００７年１月１５日 月曜日 午前９時２３分 Recording Guide line function Wind noise reduction function This is for viewing the slope and the balance of the image while recording or playing back. This is for reducing the wind noise coming into the microphone when recording. (RAM) (-RW) (-R) (-R\DL) (SD) You can check if the image is level while recording or playing back motion pictures and still pictures. The function can also be used to estimate the balance of the composition.
LSQT1093ENG.book 67 ページ ２００７年１月１５日 月曜日 午前９時２３分 Recording 2 Move the cursor button left or Microphone level This is for adjusting the microphone input level right to adjust the microphone input level. A (RAM) (-RW) (-R) (-R\DL) When recording, the input level from the built-in microphones and the external microphone terminal can be adjusted. ¬ Rotate the mode dial to select . B D C E F 1 Press the MENU button, then select [VIDEO] > [MIC LEVEL] > [SETrAGC] or [SET] and press the cursor button.
LSQT1093ENG.book 68 ページ ２００７年１月１５日 月曜日 午前９時２３分 Recording To return to automatic setting Press the MENU button, then select [VIDEO] > [MIC LEVEL] > [AUTO] and press the cursor button. ≥Adjust the gain value so that the last 2 bars of the microphone input level on the center of the screen are not red. (Otherwise, the Sound is distorted.) Select a lower setting for gain value or set [MIC LEVEL] to [AUTO]. ≥The front left and front right gain values only work when input is from an external microphone.
LSQT1093ENG.book 69 ページ ２００７年１月１５日 月曜日 午前９時２３分 Recording Manual recording functions Color bar This is for displaying a color bar to check the color tone Scene mode (RAM) (-RW) (-R) (-R\DL) (SD) This unit displays a 7 color bar which is useful for adjusting the picture quality of the TV or the external monitor. ¬ Rotate the mode dial to select . Press the MENU button, then select [ADVANCED] # [COLOR BAR] # [ON] and press the cursor button. This is for recording in various situations.
LSQT1093ENG.book 70 ページ ２００７年１月１５日 月曜日 午前９時２３分 Recording Sports mode ≥For slow-motion playback or playback pause of recorded pictures, this mode helps diminish camera shake. ≥During normal playback, the image movement may not look smooth. ≥Avoid recording under fluorescent light, mercury light or sodium light because the color and brightness of the playback image may change. ≥If you record a subject illuminated with strong light or a highly reflective subject, vertical lines of light may appear.
LSQT1093ENG.book 71 ページ ２００７年１月１５日 月曜日 午前９時２３分 Recording ≥The center of the screen is not enlarged if [MF ASSIST] is set to [OFF]. White balance This is for recording in natural colors. To restore to the automatic adjustment Press the AUTO/MANUAL/FOCUS switch down again to the FOCUS position. ≥You can also restore the auto focusing by setting the AUTO/MANUAL/FOCUS switch to AUTO. ≥The subject may not be in focus when zoomed in if focusing with a wide angle.
LSQT1093ENG.book 72 ページ ２００７年１月１５日 月曜日 午前９時２３分 Recording [ AWB ]: [ ]: [ ]: [ ]: Auto white balance adjustment Indoor mode (for recording under incandescent lamps) ≥Incandescent lights, halogen lamps Outdoor mode ≥Outdoors under a clear sky Manual adjustment mode ≥Mercury-vapor lamps, sodium lamps, some fluorescent lights ≥Lights used for wedding receptions at hotels, stage spotlights in theatres ≥Sunrise, sunset etc. To restore to the automatic adjustment Set the white balance mode to [ AWB ].
LSQT1093ENG.book 73 ページ ２００７年１月１５日 月曜日 午前９時２３分 Recording Manual shutter speed/aperture adjustment (RAM) (-RW) (-R) (-R\DL) (SD) Shutter Speed: Adjust it when recording fast-moving subjects. Aperture: Adjust it when the screen is too bright or too dark. ¬ Rotate the mode dial to select . 1 Set the AUTO/MANUAL/FOCUS switch to MANUAL. The icon shown in the illustration is displayed automatically. 2 Move the cursor button left or right to select [ ] (aperture) or [ ] (shutter speed).
Eng_body.fm 74 ページ ２００７年１月１６日 火曜日 午前１０時５５分 Playback 3 Select the scene to be played Playback Playback of motion pictures on a disc back. B Motion picture playback (RAM) (-RW) (-R) (-R\DL) Play back the motion pictures recorded on the disc. 1 Rotate the mode dial to select . PC OFF The lens cover closes. 2 Press the cursor button up and then left to select the [ ] (motion picture playback) tab.
LSQT1093ENG.book 75 ページ ２００７年１月１５日 月曜日 午前９時２３分 Playback ª About motion picture compatibility ≥This unit is based on the AVCHD format. ≥The video signal that can be played back on this unit is 1440k1080/60i. ≥This unit may degrade or not playback motion pictures recorded or created on other products, and other products may degrade or not playback motion pictures recorded on this unit, even if the products support the AVCHD. ≥No sound will be heard except during normal playback.
LSQT1093ENG.book 76 ページ ２００７年１月１５日 月曜日 午前９時２３分 Playback Frame-by-frame playback The motion picture is advanced one frame at a time. 1 Move the cursor button up during playback to pause the playback. 2 Move the cursor button right. (The frames will be advanced one at a time in the reverse direction when you move the cursor button left.) To adjust the volume Adjust the speaker volume during playback. Move the volume lever to change the volume level.
LSQT1093ENG.book 77 ページ ２００７年１月１５日 月曜日 午前９時２３分 Playback Playing back motion pictures by date (RAM) (-RW) (-R) (-R\DL) Recorded scenes are grouped by date on this unit. Scenes recorded on the same day can be played back in succession. Repeat playback (RAM) (-RW) (-R) (-R\DL) Playback of the first scene starts after playback of the last scene finishes. Press the MENU button, then select [PLAY SETUP] # [REPEAT PLAY] # [ON] and press the cursor button.
LSQT1093ENG.book 78 ページ ２００７年１月１５日 月曜日 午前９時２３分 Playback Resuming the previous playback (RAM) (-RW) (-R) (-R\DL) If playback of a scene was stopped halfway, the playback can be resumed from where it was stopped. Press the MENU button, then select [PLAY SETUP] # [RESUME PLAY] # [ON] and press the cursor button. Playback of still pictures on an SD card Still pictures (JPEG) playback (SD) Play back the still pictures recorded on the card. 1 Rotate the mode dial to select .
LSQT1093ENG.book 79 ページ ２００７年１月１５日 月曜日 午前９時２３分 Playback ≥If 9 or more files have been recorded, the next (or previous) page can be displayed by moving the cursor button left and right or moving the cursor button down, selecting [ ]/[ ] by moving the cursor button left and right and then pressing the centre of the cursor button. ≥The file number display switches to the page number when the still picture playback tab or [ ]/[ ] is selected. 4 Press the cursor button.
LSQT1093ENG.book 80 ページ ２００７年１月１５日 月曜日 午前９時２３分 Editing Editing Deleting multiple scenes from the thumbnail display Editing scenes ¬ Rotate the mode dial to select and then select the [ picture playback) tab. Deleting scenes This is for deleting scenes recorded on discs. ] (motion 1 Press the button while the thumbnail view screen is displayed. (RAM) The deleted scenes cannot be restored. ≥Scenes on DVD-RW, DVD-R and DVD-R DL cannot be deleted.
LSQT1093ENG.book 81 ページ ２００７年１月１５日 月曜日 午前９時２３分 Editing 4 (Only when [SELECT] is selected in step 2) Press the button. 5 When the confirmation message appears, select [YES], then press the cursor button. Protecting scenes This is for preventing scenes from being deleted by mistake. (RAM) Scenes recorded on a disc can be protected so that they are not deleted by mistake. (Even if you protect some scenes on a disc, formatting the disc will delete them.
LSQT1093ENG.book 82 ページ ２００７年１月１５日 月曜日 午前９時２３分 Editing Editing still pictures Deleting multiple files from the thumbnail display Deleting still pictures ¬ Rotate the mode dial to select This is for deleting still picture files recorded on SD cards. and then select the [ playback) tab. (SD) The deleted files cannot be restored. ] (still picture 1 Press the button while the thumbnail view screen is displayed.
LSQT1093ENG.book 83 ページ ２００７年１月１５日 月曜日 午前９時２３分 Editing 5 When the confirmation message appears, select [YES], then press the cursor button. Protecting still pictures This is for preventing still picture files from being deleted by mistake. (SD) (Only when [SELECT] is selected in step 2) To continue deleting other files Repeat steps 3-5. To complete editing Press the MENU button.
LSQT1093ENG.book 84 ページ ２００７年１月１５日 月曜日 午前９時２３分 Editing To complete the settings DPOF setting This is for writing the printing data on an SD card. (SD) You can write the data of the still pictures to be printed and the number of prints (DPOF data) onto the SD card. ¬ Rotate the mode dial to select and then select the [ playback) tab. ] (still picture 1 Press the MENU button, then select [PLAY SETUP] # [DPOF SET] # [SET] and press the cursor button.
LSQT1093ENG.book 85 ページ ２００７年１月１５日 月曜日 午前９時２３分 Disc and card management Disc and card management Formatting Formatting an SD card This is for initializing SD cards. (SD) Please be aware that if an SD card is formatted, then all the data recorded on the card will be erased. Store important data on a computer, etc. Formatting discs This is for initializing discs. (RAM) (-RW) Please be aware that if a disc is formatted, then all the data recorded on the disc will be erased.
LSQT1093ENG.book 86 ページ ２００７年１月１５日 月曜日 午前９時２３分 Disc and card management 2 Press the MENU button, then Finalizing a disc Finalizing a disc This allows the discs to be played back on other devices that support the AVCHD. select [SETUP] # [FINALIZE] # [YES] and press the cursor button. MENU (-RW) (-R) (-R\DL) If you insert a DVD-RW, DVD-R or DVD-R DL disc recorded in this unit (that has not been finalized) into another device such as DVD recorder, computer, etc., the disc may become unusable.
LSQT1093ENG.book 87 ページ ２００７年１月１５日 月曜日 午前９時２３分 Disc and card management Un-finalizing a DVD-RW Creating a top menu This is for un-finalizing a DVD-RW so that it can be used for recording. A top menu is displayed when a DVD-RAM is played back on other devices that support the AVCHD. (-RW) ¬ Rotate the mode dial to select and then select the [ picture playback) tab. ] (motion 1 Press the MENU button, then select [SETUP] # [UN-FINALIZE] # [YES] and press the cursor button.
LSQT1093ENG.book 88 ページ ２００７年１月１５日 月曜日 午前９時２３分 Disc and card management Protecting a disc (RAM) (-RW) This is for protecting discs (write protection) when they are being ejected from this unit to prevent them from being formatted if they are inserted in other devices. Discs protected using this unit cannot be edited or used to record on other devices, but they can be used in the same way as unprotected discs with this unit.
LSQT1093ENG.book 89 ページ ２００７年１月１５日 月曜日 午前９時２３分 Disc and card management ¬ Rotate the mode dial to select or rotate the mode dial to and then select the [ ] (motion picture playback) tab. 1 Press the MENU button, then select [SETUP] # [AUTO PROTECT] # [ON] and press the cursor button. MENU ≥This function’s default setting is [ON]. ≥We recommend that the auto protect function is set to [ON] in order to prevent accidental deletion on other devices.
LSQT1093ENG.book 90 ページ ２００７年１月１５日 月曜日 午前９時２３分 With other products With other products ≥Do not use any other component cables except the supplied one. ≥Use the AC adaptor to free you from worrying about the battery running down. With a TV ª To display the on-screen information on the TV Playback on TV (RAM) (-RW) (-R) (-R\DL) (SD) The motion pictures and still pictures recorded on this unit can be played back on a TV screen. Connect this unit to a TV with one of the following terminals.
LSQT1093ENG.book 91 ページ ２００７年１月１５日 月曜日 午前９時２３分 With other products 1 Connecting with a HDMI cable (optional) What is HDMI? HDMI is the next-generation interface for digital devices. When this unit is connected to a HDMI compatible device, the image and audio can be output with a digital signal. If you connect this unit and a HDMI compatible high definition TV and then play back the recorded high definition images (l 13), you can enjoy them in high resolution with high quality sound.
LSQT1093ENG.book 92 ページ ２００７年１月１５日 月曜日 午前９時２３分 With other products ª About the settings when connecting with HDMI When this unit is connected to another device with a HDMI cable, the output setting on this unit can be changed. HDMI output resolution You can switch the method to output the images. Press the MENU button, then select [SETUP] > [HDMI RESOLUTION] desired item and press the cursor button. [AUTO]: The output resolution is automatically set based on the information from the connected TV.
LSQT1093ENG.book 93 ページ ２００７年１月１５日 月曜日 午前９時２３分 With other products 2 Listening in 5.1 channel sound If you connect this unit and an AV amplifier that has a HDMI terminal using a HDMI cable and then playback, you can listen to 5.1 channel sound recorded from the internal microphones. ≥Please read the operating instructions for the AV amplifier, speakers and TV for more information about how to connect them etc.
LSQT1093ENG.book 94 ページ ２００７年１月１５日 月曜日 午前９時２３分 With other products 3 Connecting with the component cable (supplied) and the AV cable (supplied) 1 Connect this unit and a TV with the component cable (supplied) and the AV cable (supplied). A A/V C COMPONENT VIDEO IN AUDIO IN COMPONENT B A Component cable (supplied) B AV cable (supplied) ≥Connect to terminals of the same color. ≥The component terminal C is for outputting images only so be sure to also connect the AV cable.
LSQT1093ENG.book 95 ページ ２００７年１月１５日 月曜日 午前９時２３分 With other products ª If the image or audio from this unit is not output on the TV ≥Check that the plugs are inserted as far as they go. ≥Check the connected terminal. ≥Check the TV’s input setting (input switch). (For more information, please read the operating instructions for the TV.) ≥If the images are not displayed correctly on a wide-screen TV, adjust the setting in screen mode on the TV.
Eng_body.fm 96 ページ ２００７年１月１６日 火曜日 午前１０時５７分 With other products Playback using EZ Sync™ (HDAVI Control™) (RAM) (-RW) (-R) (-R\DL) (SD) If you connect this unit to a Panasonic TV compatible with EZ Sync™ (HDAVI Control™) with a HDMI cable, the following linked operations become possible. ≥You can use the remote control for the TV to control playback on this unit. ≥If you use the remote control for the TV to turn off the power, the power on this unit also turns off.
LSQT1093ENG.book 97 ページ ２００７年１月１５日 月曜日 午前９時２３分 With other products 5 Operate with the remote control for the TV. 1) 2) A DISPLAY ON/OFF B C D 1) Press the button up, down, left or right to select a scene or file to be played back, and then press the button in the centre to set it. 2) Activate the operation icons that are displayed on TV screen with the remote control for the TV.
LSQT1093ENG.book 98 ページ ２００７年１月１５日 With other products Playback using Blu-ray Disc Players (RAM) (-RW) (-R) (-R\DL) Discs recorded with this unit can be inserted in Panasonic Blu-ray Disc Players and played back. Devices which can play back discs recorded with this unit – DMP-BD10 Blu-ray Disc Player ≥Do not insert DVD-RW, DVD-R or DVD-R DL discs that have not been finalized into a Blu-ray Disc Player. Doing so could result in an unusable disc.
LSQT1093ENG.book 99 ページ ２００７年１月１５日 月曜日 午前９時２３分 With other products Dubbing images onto a connected DVD recorder or video device To stop dubbing 1) Stop recording on the connected device. 2) Then stop playback on this unit. (RAM) (-RW) (-R) (-R\DL) Dubbing images onto a connected DVD recorder or video device ≥Images are dubbed in standard picture quality. ≥Use the AC adaptor to free you from worrying about the battery running down. 1 Connect this unit and a video device.
LSQT1093ENG.book 100 ページ ２００７年１月１５日 月曜日 午前９時２３分 With other products 2 Select a file to be printed, then With a printer (PictBridge) (SD) To print pictures by directly connecting this unit to the printer, use a printer compatible with PictBridge. (Read the operating instructions for the printer.) ≥Use the AC adaptor to free you from worrying about the battery running down. ≥Insert an SD card with recorded images in this unit and then set the mode dial to to turn on the power.
LSQT1093ENG.book 101 ページ ２００７年１月１５日 月曜日 午前９時２３分 With other products 6 Select the paper size setting on [PAPER SIZE]. [STANDARD]: Size specific to the printer [4k5 INCH]: L size [5k7 INCH]: 2L size [4k6 INCH]: Postcard size [A4]: A4 size ≥You cannot set paper sizes not supported on the printer. 7 Select the layout setting on [PAGE LAYOUT]. [STANDARD]: Layout specific to the printer [ ]: No frame print [ ]: Frame print When you stop printing halfway Move the cursor button down.
LSQT1093ENG.book 102 ページ ２００７年１月１５日 月曜日 午前９時２３分 With a computer With a computer Before using with a computer What you can do with a computer ª When using still pictures recorded on this unit with a computer.
LSQT1093ENG.book 103 ページ ２００７年１月１５日 月曜日 午前９時２３分 With a computer Connection and recognition Connection and recognition procedures ≥If the recognition procedure is not accomplished properly, operation will not be possible after connecting the unit to the computer. ≥If the unit fails to operate normally it may mean that the correction procedure was not conducted properly. 1 Connect this unit to the AC adaptor. ≥If a battery is used, operation is not possible when this unit is connected to a computer.
LSQT1093ENG.book 104 ページ ２００７年１月１５日 月曜日 午前９時２３分 With a computer About the computer display When the unit is connected to a computer, it is recognized as an external drive. ≥[Removable Disk] is displayed in [My Computer]. Example folder structure of an SD card: Removable Disk DCIM 100CDPFP MISC ≥JPEG format still pictures (IMGA0001.JPG etc.) are stored in the [100CDPFP] folder. These can be opened with picture software that supports JPEG pictures.
LSQT1093ENG.book 105 ページ ２００７年１月１５日 月曜日 午前９時２３分 With a computer To disconnect USB cable safely 1 Double click the icon in task tray displayed on the computer. ≥Hardware disconnect dialogue appears. ≥Depending on your computer’s settings, this icon may not be displayed. 2 Select [USB Mass Storage Device] and click [Stop]. ≥Verify [MATSHITA HDC-DX1 USB Device] is selected and click [OK]. 3 Select [USB Mass Storage Device] and click [Stop].
LSQT1093ENG.book 106 ページ ２００７年１月１５日 月曜日 午前９時２３分 With a computer Verifying the unit is correctly recognized by the computer To verify this unit is correctly recognized by the computer, rotate the mode dial on this unit to select PC connection mode, then connect the unit to the computer with a USB cable and follow the steps below. ≥With some computers including those made by NEC, the Device Manager may not be displayed if a mode that places restrictions on the functions has been established.
LSQT1093ENG.book 107 ページ ２００７年１月１５日 月曜日 午前９時２３分 With a computer If using a Macintosh ≥Even if the system requirements mentioned in these operating instructions are fulfilled, some personal computers cannot be used. ≥Apple, Mac OS is either registered trademarks or trademarks of Apple Computer, Inc. in the United States and/or other countries. ≥PowerPC is a trademark of International Business Machines Corporation.
LSQT1093ENG.book 108 ページ ２００７年１月１５日 月曜日 午前９時２３分 Others Others Menus and Indications Menu list Recording menus ª [BASIC] [SCENE MODE] (l 69) [D.ZOOM] (l 58) [O.I.S.] (l 65) [GUIDE LINES] (l 66) [CLOCK SET] (l 45) ª [VIDEO] [REC MODE] (l 52) [FADE COLOR] (l 60) [WIND CUT] (l 66) [ZOOM MIC] (l 58) [MIC LEVEL] (l 67) [AGS] (l 49) ª [PICTURE] [PICT.
LSQT1093ENG.
LSQT1093ENG.book 110 ページ ２００７年１月１５日 月曜日 午前９時２３分 Others Menus related to [ADVANCED] and [SETUP] ª [REC LAMP] ≥[OFF] ≥[ON] The recording lamp lights during recording and flashes when the unit receives a signal from the remote control or when the self-timer is counting down. When this is set to [OFF], it does not light during recording. ª [DISPLAY] ≥[OFF] ≥[ON] The screen indications are selected as shown in the illustration below.
LSQT1093ENG.
LSQT1093ENG.book 112 ページ ２００７年１月１５日 月曜日 午前９時２３分 Others ª Playback indications Motion picture playback 2.1Ｍ Number of recording pixels for still pictures 1920k1080 The picture size is not displayed for still pictures recorded with other products that have different picture sizes from the sizes shown above.
LSQT1093ENG.book 113 ページ ２００７年１月１５日 月曜日 午前９時２３分 Others Messages CANNOT RECORD. Data writing to the disc or SD card has failed. NO DATA. There are no images recorded on the disc or SD card. If this message appears although data is recorded on the SD card, the condition of the card is probably not stable. Turn off the power and then turn it on again. CANNOT BE USED DUE TO INCOMPATIBLE DATA. The recording format is different so it cannot be used. Insert a new disc.
LSQT1093ENG.book 114 ページ ２００７年１月１５日 月曜日 午前９時２３分 Others CANNOT FINALIZE. CANNOT UN-FINALIZE THIS DISC. The disc cannot be finalized (un-finalized) on this unit. (The disc was recorded on another device etc.) Or, you are trying to finalize a disc that has no motion pictures recorded on it. CANNOT READ DISC. PLEASE CHECK CONDITION OF DISC. There are scratches or dirt on the recording/playback side of the disc. If there is dirt on the disc, use the supplied cleaning cloth to wipe it.
LSQT1093ENG.book 115 ページ ２００７年１月１５日 月曜日 午前９時２３分 Others About recovery It is possible that the system cannot complete writing of a file normally when, for example, power is turned off for some reason during recording or editing. If faulty management information is found when a disc is accessed, the following message may appear. (Repairing may take time depending on the error.) CONTROL DATA ERROR HAS BEEN DETECTED.
LSQT1093ENG.book 116 ページ ２００７年１月１５日 月曜日 午前９時２３分 Others Functions that cannot be used simultaneously Some functions in this unit are disabled or cannot be selected due to the unit’s specifications. The table below shows examples of functions restricted by various conditions.
LSQT1093ENG.book 117 ページ ２００７年１月１５日 月曜日 午前９時２３分 Others Frequently asked questions What kind of discs can be used? DVD-RAM, DVD-RW, DVD-R and DVD-R DL can be used if they are 8 cm (3q) bare discs. (l 26) Can discs with a cartridge be used? They can be used if the cartridge is removed. Can double sided discs be used? They can be used. However you cannot record or play continuously from one side of the disc to the other. You will need to eject the disc and turn it over.
LSQT1093ENG.book 118 ページ ２００７年１月１５日 月曜日 午前９時２３分 Others Troubleshooting ª Unit operations Problem Check points This unit cannot be turned on. ≥Is the battery fully charged? # Charge the battery using the AC adaptor. (l 31) ≥The battery protection circuit may have operated. Attach the battery to the AC adaptor for 5 to 10 seconds. If the unit still cannot be used, the battery is faulty. ≥Is the LCD monitor opened or the viewfinder extended? This unit is turned off automatically.
LSQT1093ENG.book 119 ページ ２００７年１月１５日 月曜日 午前９時２３分 Others Problem This unit cannot be operated though it is turned on. This unit does not operate normally. Check points ≥The unit cannot be operated unless you open the LCD monitor or extend the viewfinder. ≥Press the RESET button. (l 122) If normal conditions are not restored yet, remove the battery or AC adaptor, wait about 1 minute and then reconnect the battery or AC adaptor. Then about 1 minute later, turn on the power again.
LSQT1093ENG.book 120 ページ ２００７年１月１５日 月曜日 午前９時２３分 Others Problem Recording starts but stops immediately. The playback picture breaks up for a moment. Check points ≥Is the disc scratched or dirty? # Wipe off the dirt on the disc. (l 30) If the disc is scratched, insert a new one. ≥The unit is hot. Follow the messages on the display. To use the unit again, turn the unit off and leave it for a while. The unit arbitrarily stops recording.
LSQT1093ENG.book 121 ページ ２００７年１月１５日 月曜日 午前９時２３分 Others Problem Check points Scenes cannot be deleted or edited. ≥Is the scene protected? # Release the protection. (l 81) If the disc or the contents on the disc have been protected on another device, release the protection on the same device. ≥Scene which cannot be displayed as thumbnails (the thumbnails are displayed as [ ]) cannot be deleted. If the scenes are unnecessary, format the disc or SD card to erase the data.
LSQT1093ENG.book 122 ページ ２００７年１月１５日 月曜日 午前９時２３分 Others Problem Check points “PUSH THE RESET SWITCH.” or “CHECK THE DISC AFTER PUSHING THE RESET SWITCH TO REPAIR THE DISC.” is displayed. ≥Is the disc scratched or dirty? # After using the following method to restart the unit, eject the disc and clean it. (l 30) If there are scratches on the disc, use a new disc. ≥The unit has automatically detected an error. Press the RESET button with the projecting part of the grip belt A.
LSQT1093ENG.book 123 ページ ２００７年１月１５日 月曜日 午前９時２３分 Others ª When connected to another device Problem Check points EZ Sync does not work. ≥Are you connecting with the component cable or the AV cable? # Connect with a HDMI cable (purchase separately). (l 96) ≥Is the [EZ Sync] setting appropriate? # Press the MENU button, then select [SETUP] > [EZ Sync] > [ON] with the cursor button. ≥Depending on HDMI terminal of the TV, the input channel may not switch automatically.
LSQT1093ENG.book 124 ページ ２００７年１月１５日 月曜日 午前９時２３分 Others Cautions for use About this unit ≥The unit, disc and SD card become warm after long operation, but this is not a malfunction. Keep the High Definition Video Camera as far away as possible from electromagnetic equipment (such as microwave ovens, TVs, video games etc.). ≥If you use the High Definition Video Camera on top of or near a TV, the pictures and sound on the High Definition Video Camera may be disrupted by electromagnetic wave radiation.
LSQT1093ENG.book 125 ページ ２００７年１月１５日 月曜日 午前９時２３分 Others About the battery The battery used in this unit is a rechargeable lithium-ion battery. It is susceptible to humidity and temperature and the effect increases the more the temperature rises or falls. In cold areas, the full charge indication may not appear or the low battery indication may appear about 5 minutes after starting use. At high temperatures, the protection function may be triggered, making it impossible to use the unit.
LSQT1093ENG.
LSQT1093ENG.book 127 ページ ２００７年１月１５日 月曜日 午前９時２３分 Others About condensation When condensation forms on the unit, the lens will cloud up and the unit may not work properly. Make every effort to ensure that condensation does not form. If it does form, take the actions described below. Causes of condensation Condensation takes place when the ambient temperature or humidity is changed as follows. ≥When this unit is brought inside from the cold (e.g. a ski slope) to a warm room.
LSQT1093ENG.book 128 ページ ２００７年１月１５日 月曜日 午前９時２３分 Others Outside of the effective range of automatic white balance adjustment, the image will become reddish or bluish. Even within the effective range of automatic white balance adjustment, the automatic white balance adjustment may not function properly if there is more than one light source. For light outside the functional automatic white balance adjustment range, use the manual white balance adjustment mode.
LSQT1093ENG.book 129 ページ ２００７年１月１５日 月曜日 午前９時２３分 Others Specifications High Definition Video Camera Information for your safety Power source: Power consumption: DC 7.3 V (When using AC adaptor)/7.2 V (When using battery) Recording 11.4 W Signal system 1080/60i Recording format AVCHD format compliant Image sensor 1/4z 3CCD image sensor Total: 560 Kk3 Effective pixels: Motion picture/still picture: 520 Kk3 Lens Auto Iris, F1.8 to F2.8 Focal length: 4.0 mm to 48.
LSQT1093ENG.book 130 ページ ２００７年１月１５日 月曜日 午前９時２３分 Others Dimensions 91.5 mm (W)k90.2 mm (H)k162.4 mm (D) [3.60z (W)k3.55z (H)k6.40z (D)] (excluding projecting parts) Mass Approx. 680 g (1.50 lbs.) (without supplied battery, disc and an SD card) Mass in operation Approx. 800 g (1.76 lbs.
LSQT1093ENG.book 131 ページ ２００７年１月１５日 月曜日 午前９時２３分 Others AC adaptor Information for your safety Power source: Power consumption: DC output: AC 110 V to 240 V, 50/60 Hz 22 W DC 7.3 V, 1.75 A (Unit operation) DC 8.4 V, 1.3 A (Battery charging) Dimensions 103 mm (W)k36 mm (H)k62 mm (D) [4.1z (W)k1.4z (H)k2.4z (D)] Mass Approx. 140 g (0.31 lbs.) Battery pack Information for your safety Maximum voltage: Nominal voltage: Rated capacitance: DC 8.4 V DC 7.
LSQT1093ENG.book 132 ページ ２００７年１月１５日 月曜日 午前９時２３分 Others Optional accessories Accessory No.
LSQT1093ENG.book 133 ページ ２００７年１月１５日 月曜日 午前９時２３分 Others Accessory Order Form (For USA Customers) Please photocopy this form when placing an order. 1. Model # 2. Items Ordered Accessory # Description Price Each Quantity Total Price Subtotal Your State & Local Sales Tax Shipping & Handling 6.95 Total Enclosed 3. Method of payment (check one) Check of Money Order enclosed (NO C.O.D.
LSQT1093ENG.book 134 ページ ２００７年１月１５日 月曜日 午前９時２３分 Others Request for Service Notice (USA Only) Please photocopy this form when making a request for service notice, in the unlikely event this product needs service. Request for Service Notice: •Please include your proof of purchase. (Failure to do so will delay your repair.) •To further speed your repair, please provide an explanation of what is wrong with the unit and any symptom it is exhibiting.
LSQT1093ENG.book 135 ページ ２００７年１月１５日 月曜日 午前９時２３分 Others Limited Warranty (For USA Customers) PANASONIC CONSUMER ELECTRONICS COMPANY, DIVISION OF PANASONIC CORPORATION OF NORTH AMERICA One Panasonic Way, Secaucus, New Jersey 07094 PANASONIC PUERTO RICO, INC. Ave. 65 de Infantería, Km. 9.
Eng_warrantyPP.fm 136 ページ ２００７年１月１６日 火曜日 午前１１時０分 Others Customer Services Directory Service in Canada: As per Sevicenter listed in Canadian warranty information l 137. Obtain Product Information and Operating Assistance; locate your nearest Dealer or Service Center; purchase Parts and Accessories; or make Customer Service and Literature requests by visiting our Web Site at: http://www.panasonic.com/consumersupport or, contact us via the web at: http://www.panasonic.
LSQT1093ENG.book 137 ページ ２００７年１月１５日 月曜日 午前９時２３分 Others Warranty (For Canadian Customers) Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 PANASONIC PRODUCT – LIMITED WARRANTY Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship and agrees to remedy any such defect for a period as stated below from the date of original purchase.
LSQT1093ENG.book 138 ページ ２００７年１月１５日 月曜日 午前９時２３分 Others Index ª Numerics 0 Lux MagicPix ..............................................61 5.1 channel ....................................................93 ª A A/V terminal .......................................20, 94, 95 AC adaptor .......................................31, 33, 125 Accessory shoe .............................................22 Aperture .........................................................73 Auto focus ................................
LSQT1093ENG.book 139 ページ ２００７年１月１５日 月曜日 午前９時２３分 Others ª P Pickup lens ....................................................36 PictBridge ....................................................100 Picture quality ................................................56 Playing back motion pictures by date ............77 Power LCD ....................................................47 Power save ..................................................110 Protect (Disc) .................................................
LSQT1093ENG.book 140 ページ ２００７年１月１５日 月曜日 午前９時２３分 Others Spanish Quick Use Guide/ Guía española para el uso rápido ª Cómo encender la cámara Mientras pulsa el botón de desbloqueo A, ajuste el disco del modo a , o a PC . ª Carga de la batería PC OF F A ª Cómo apagar la cámara Ajuste el disco del modo a OFF. 1 Conecte el cable de CA al 2 Instale la batería en el compartimiento alineando la marca y, luego, conéctela de forma segura.
LSQT1093ENG.book 141 ページ ２００７年１月１５日 月曜日 午前９時２３分 Others ª Insertar/extraer un disco ª Insertar/extraer una tarjeta SD 1 Unir la batería o conectar el 1 Ajuste el disco del modo a OFF. 2 Abra el monitor LCD e inserte/ adaptador de CA. 2 Deslice la palanca DISC EJECT una vez y luego suéltela. extraiga la tarjeta SD en/de la ranura de la tarjeta. ACCESS /PC DISC EJECT 3 Abra la tapa del compartimiento del disco con la mano e inserte/ extraiga el disco.
LSQT1093ENG.book 142 ページ ２００７年１月１５日 月曜日 午前９時２３分 Others ª Utilice un disco para grabar imagen en movimientos ª Utilice una tarjeta SD para grabar imágenes fijas 1 Gire el disco del modo para 1 Gire el disco del modo para . seleccionar PC OF F 2 Pulse el botón de inicio/parada de grabación para iniciar la grabación. 3 Vuelva a pulsar el botón de inicio/parada de grabación para hacer una pausa en la grabación. 142 LSQT1093 .
LSQT1093ENG.book 143 ページ ２００７年１月１５日 月曜日 午前９時２３分 Others ª Reproducción de imágenes en movimiento en un disco ª Reproducción de imágenes fijas en una tarjeta SD 1 Gire el disco del modo para 1 Gire el disco del modo para seleccionar . seleccionar . PC PC OFF OFF 2 Pulse el botón cursor hacia 2 Pulse el botón cursor hacia arriba y luego a la izquierda para seleccionar la ficha [ ] (reproducción de imágenes en movimiento).
BackcoverPP_Eng.fm 144 ページ ２００７年１月１７日 水曜日 午後１２時７分 Panasonic Consumer Electronics Company, Division of Panasonic Corporation of North America One Panasonic Way, Secaucus, NJ 07094 Panasonic Puerto Rico, Inc. Ave. 65 de Infantería, Km. 9.5, San Gabriel Industrial Park, Carolina, Puerto Rico 00985 Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 P LSQT1093 A F0107Nm0 ( 10000 A ) C © 2007 Matsushita Electric Industrial Co., Ltd.
