Operating instructions
Table Of Contents
- Information for Your Safety
- Accessories
- Optional accessories
- Preparation
- Recording
- Before recording
- Selecting a media to record
- Recording motion picture
- Recording still pictures
- Intelligent Auto Mode/Manual Mode
- Using the zoom
- Using the Built-in LED Light
- Manual Recording
- Focus
- Iris/Gain adjustment
- White Balance
- Manual shutter speed
- Audio Input
- Counter display
- USER button
- Using Operation Icons
- Using of jog dial
- Playback
- Editing
- Linking to external devices
- Menu
- Display
- Others
- 80 -
Zebra
You can switch between the zebra display and marker display.
Touch .
Each time the icon is selected, the indication changes in the following order:
Zebra 1 # Zebra 2
*
# Marker
*
# setting canceled
* It is not displayed when the [ZEBRA DETECT 2]/[MARKER] is set to [OFF]. (l 127)
≥ You can also use this function with a USER button. (l 76)
Zebra display:
Parts where white saturation (color saturation) is likely to occur (extremely brightly lit or shiny parts)
are displayed with diagonal lines (zebra pattern A).
Marker display:
Displays the luminance level of the center of the screen (luminance display frame B) in %.
It makes the adjustment of the brightness of the object easier, by checking the luminance level of
the object, when recording same object in different surroundings.
≥ Luminance level C is displayed between 0% and 99%. It will be displayed as 99% when it is
over 99%.
≥ This item cannot be set during Freeze Frame. (l 69)
≥ You can record an image with little white saturation if you manually adjust the shutter speed or
brightness not to display zebra pattern. (l 51, 57)
≥ The zebra pattern does not appear on the images actually recorded.
≥ It is also possible to adjust the level of the zebra pattern to be displayed. (l 127)
≥ It is also possible to change the [
ZEBRA MODE] setting to change the display time for the zebra
pattern display. (l 120)
(When Zebra 1 is set) (When Marker is set)
ZEBRA
99%