Operating instructions
Table Of Contents
- Information for Your Safety
- Accessories
- Optional accessories
- Preparation
- Recording
- Before recording
- Selecting a media to record
- Recording motion picture
- Recording still pictures
- Intelligent Auto Mode/Manual Mode
- Using the zoom
- Using the Built-in LED Light
- Manual Recording
- Focus
- Iris/Gain adjustment
- White Balance
- Manual shutter speed
- Audio Input
- Counter display
- USER button
- Using Operation Icons
- Using of jog dial
- Playback
- Editing
- Linking to external devices
- Menu
- Display
- Others
- 74 -
≥ The setting will be turned off in the following cases:
j If you turn the unit off
j When the mode switch position is changed
j If you switch to Intelligent Auto Mode
≥ This function will fix the shutter speed to 1/50. The shutter speed cannot be adjusted.
≥ Register <PRE-REC> to a USER button. (l 63)
This allows the recording of an image and audio to start before you press the recording start/stop
button. AVCHD scenes will be recorded from approximately 3 seconds before the operation, while
MOV/MP4 will be recorded from approximately 4 seconds before the operation.
≥ [P-] is displayed on the screen. After you start recording, the display changes to [P-REC].
≥ Aim the unit at the subject beforehand.
≥ There is no beep sound.
≥ This function is not available in the following cases:
j During Super Slow Recording
j During the Interval Recording (l 123)
≥ In the following cases, a 3 second image that precedes the recording of an AVCHD scene or a
4 second scene that precedes the recording of an MOV/MP4 scene may not be recorded:
j Immediately after the maximum PRE-REC standby time has elapsed*
j If the length of time from when [PRE-REC] is set to [ON] to when you start recording is too
short
j When the unit is turned off and on or the mode switch position is changed after PRE-REC is set
so the length of time from when you switch to the recording screen until when you start
recording is short.
j When the card slot selected for motion picture recording is switched automatically because you
started recording with normal settings or when [2 SLOTS FUNC.] is set to [RELAY REC]
(l 121)
* The maximum PRE-REC standby time is 3 hours. Once PRE-REC is activated, it is automatically
deactivated and then re-activated every 3 hours.
≥ Images displayed on the thumbnail in Playback Mode will differ from the motion pictures
displayed at the start of playback.
This enables/disables Super Slow Recording. You can enable this function to record slow motion
pictures.
≥ Switch to Manual Mode. (l 40)
≥ Register <SUPER SLOW> to a USER button. (l 63)
≥ Make the [REC MODE] and [REC FORMAT] settings. (l 114)
≥ Super Slow Recording is available for the following [REC MODE] and [REC FORMAT] settings:
1 Press USER button or touch USER button icon in the recording screen.
≥ [SUPER SLOW] will be displayed.
≥ The frame rate display will change.
<PRE-REC>
<SUPER SLOW>
Recording mode Recording format
MOV, MP4 FHD 1080/50.00p 50M, FHD 1080/25.00p 50M










