Operating instructions

- 72 -
≥ Register <LEVEL GAUGE> to a USER button. (l 63)
This function displays the horizontal/vertical tilt of the unit with the electronic level.
∫ To correct the tilt
≥ The horizontal tilt display A and vertical tilt display B appear yellow when there is a tilt, and
appear green when there is almost no tilt.
≥ The maximum tilt display angles are approximately 45o in horizontal direction and 10o in vertical
direction.
≥ The electronic level does not affect the actual recorded images.
≥ This function is not available in the following cases:
j During Freeze Frame (l 69)
j When color bars are displayed. (l 79)
≥ If [SELF SHOOT] (l 130) is set to [MIRROR], the electronic level will not be displayed when you
record yourself.
≥ Even when the tilt is in the corrected state, an error of approximately 1o may occur.
≥ In the following cases, the electronic level may not be displayed correctly:
j When moving this unit
j When pointing this unit up or down at an angle closer to perpendicular
≥ Register <LEVEL SHOT> to a USER button. (l 63)
This function detects the horizontal tilt of the unit, and automatically corrects it to the level position.
≥ is displayed on the screen.
≥ The icon changes when the tilt exceeds the correction range.
≥ When the tilt exceeds the correction range, move the unit to the position where is displayed.
≥ This function is not available in the following cases:
j During Super Slow Recording (l 74)
≥ The setting of this function cannot be changed during Freeze Frame. (l 69)
≥ [LEVEL GAUGE] turns off if you set [LEVEL SHOT] to [ON]. Conversely, [LEVEL SHOT] turns off
if you set [LEVEL GAUGE] to [ON].
≥ The range that this icon can be displayed correctly the slope is about 45 o to the horizontal
direction.
<LEVEL GAUGE>
(Horizontal direction) (Vertical direction)
When correcting the leftward tilt When correcting the downward tilt
<LEVEL SHOT>
When the tilt is corrected
/
When the tilt is above the correction range


