Operating instructions

Table Of Contents

- 71 -

≥ Area Function is not possible in following cases:

j When a setting in [SCENE MODE] is enabled (l 110)

j During Super Slow Recording (l 74)

≥ Area mode is canceled in following cases:

j If you turn the unit off

j When the mode switch position is changed

j If you switch to Intelligent Auto Mode (l 40)

j When the setting of [ASPECT CONVERT] is changed (l 116)

≥ When using Area Mode, even if you set zebra function to [MARKER], the luminance display

frame will not be displayed. (l 80)

In addition, the luminance level will not be displayed if [AREA MODE] is set to [FOCUS], [IRIS] or

[FOCUS/IRIS].

≥ Register <PUSH AF> to a USER button. (l 63)

You can use One Push AF and Push AF. (l 46)

≥ Register <CAPTURE> to a USER button. (l 63)

You can record still pictures or create still pictures from recorded motion pictures. (l 39, 89)

≥ Register <EVF/LCD DETAIL> to a USER button. (l 63)

[EVF/LCD DETAIL] helps you achieve focus easier by emphasizing the outlines of an image

displayed on the LCD monitor or the viewfinder. (l 46)

≥ These settings will not affect the images actually recorded.

≥ Register <LCD/EVF OUTPUT> to a USER button. (l 63)

This changes how to turn on/off the LCD monitor and Viewfinder. (l 27)