Operating instructions

Table Of Contents

- 68 -

≥ Register <HISTOGRAM> to a USER button. (l 63)

A graph with brightness as horizontal axis and number of pixels at that brightness as vertical axis is

displayed. It is possible to determine the exposure of the whole image by looking at the distribution

in the graph.

∫ To move a histogram

You can move a histogram by touching and holding the

histogram display A. Slide the display while touching it to

move it to the desired display location.

≥ This item cannot be set during Freeze Frame. (l 69)

≥ To adjust the brightness, refer to page 51.

≥ Register <REC CHECK> to a USER button. (l 63)

Approximately 2 seconds at the end of the video recorded last can be played back. It will return to

recording screen once the playback is completed.

≥ Playback operation is not possible during the Recording Check.

≥ Recording Check is not possible in following cases:

j When the unit is turned on/off

j When the mode switch position is changed

j When the SD card is inserted/removed

j When the setting of [REC FORMAT] is changed (l 114)

j Set [2 SLOTS FUNC.] to [SIMULTANEOUS]. (l 121)

j PRE-REC is used (l 74, 124)

j During the Interval Recording (l 123)

j During Freeze Frame (l 69)

≥ Register <LAST SCN DEL> to a USER button. (l 63)

The motion picture recorded last can be deleted.

Deleted scenes cannot be restored.

1 Press USER button or touch USER button icon in the recording screen.

2 Touch [YES].

≥ It will return to recording screen without deleting by touching [NO].