Operating instructions

Table Of Contents

- 67 -

≥ Register <SLOT SEL> to a USER button. (l 63)

You can change the card slot used for motion picture recording or the playback media.

≥ You can change the setting in the following situations:

j While recording is paused in Recording Mode

j While a thumbnail screen is displayed in Playback Mode (l 84)

j While the list by date is selected (l 91)

≥ Register <ATW LOCK> to a USER button. (l 63)

This sets the White Balance mode to [ATW LOCK]. (l 55)

≥ Register <D.ZOOM> to a USER button. (l 63)

Press USER button or touch USER button icon in the recording screen.

≥ When [DIGITAL ZOOM] is set to [k2], [k5] or [k10], Digital Zoom will be turned on/off each time

you press the button.

≥ When [DIGITAL ZOOM] is set to [TOGGLE], the zoom magnification will change each time you

press the button.

2k # 5k # 10k # Setting canceled

∫ To change the zoom magnification of Digital Zoom

The zoom magnification of Digital Zoom varies depending on the [DIGITAL ZOOM] setting.

≥ When using Digital Zoom, the larger you set the zoom magnification, the lower the picture quality

becomes.

≥ Digital Zoom is not possible in following cases:

j During Freeze Frame (l 69)

j When using Area Mode (l 70)

j During Super Slow Recording (l 74)

j During the Interval Recording (l 123)

≥ Digital zoom is canceled in following cases:

j If you turn the unit off

j When the mode switch position is changed

<D.ZOOM>

: [SW SETUP] # [DIGITAL ZOOM] # desired setting

[k2]: Sets the zoom magnification to 2k.

[k5]: Sets the zoom magnification to 5k.

[k10]: Sets the zoom magnification to 10k.

[TOGGLE]: Changes the zoom magnification each time you press the applicable

USER button.