Operating instructions

Table Of Contents

- 66 -

≥ Register <FOCUS ASSIST 2> to a USER button. (l 63)

You can set the Focus Assist. (l 47)

≥ You can set the Focus Assist method in [FOCUS ASSIST 2] in the [SW SETUP] menu.

≥ When [FOCUS ASSIST 1] in the [SW SETUP] menu is set to [BOTH], the USER button is

disabled.

≥ Register <BACKLIGHT> to a USER button. (l 63)

Switches to automatic iris control to compensate the backlight.

This makes the image brighter to prevent darkening of a backlit subject. (l 52)

≥ Register <BLACK FADE> to a USER button. (l 63)

Fade in/fade out effect (black) can be added to the video and audio that is being recorded.

Press USER button or touch USER button icon in the recording screen.

≥ Fade out will start, and fade in will start after completing the fade out.

≥ It will fade out when the button is pressed and held, and fade in will start when the button is

released.

≥ Recording will not start even if the fade out is started. It is possible to press the recording start/

stop button during the fade in or fade out.

≥ Black Fade is not possible in following cases:

j During Super Slow Recording (l 74)

j During the Interval Recording (l 123)

j During Freeze Frame (l 69)

≥ The thumbnails of scenes recorded using fade in become black.

≥ Register <WHITE FADE> to a USER button. (l 63)

Fade in/fade out effect (white) can be added to the video and audio that is being recorded.