Operating instructions

- 63 -
Each of the USER button can register one function from the 30 available functions.
≥ There are 3 USER buttons (USER1 to 3) on the main body and 4 USER button icons (USER4 to
USER7) displayed on the LCD monitor.
Setting the USER button
1 Select the menu.
≥ It is not possible to register functions to [USER4] to [USER7] in Playback Mode.
2 Touch the item to register.
≥ For the functions of the USER button that can be registered, refer to page 64.
≥ Touch <INHIBIT> if not registering.
≥ Next (Previous) page can be displayed by touching / .
3 Touch [EXIT] to complete the setting.
≥ The tables below show the default settings.
≥ Performing [YES] in [INITIAL SET] restores these default settings. (l 134)
Using the USER button
To use the function assigned to a USER button or USER button icon, press the applicable USER
button (one of the USER buttons 1 to 3), or touch the applicable USER button icon (one of the
USER button icons 4 to 7) while operation icons are displayed.
Recording
USER button
: [USER SW] # [USER1] to [USER7]
USER1 <PUSH AF> USER5 <DRS>
USER2 <WHITE BAL> USER6 <LEVEL GAUGE>
USER3 <FOCUS ASSIST 1> USER7 <MENU>
USER4 <FRZ FRAME>
(When you use the USER1 to USER2 button) (When you use the USER3 button)
MENU
3
FOCUS ASSIST
ヱヶヴラチモョ ヸラリヵユチャモロ
ヒビヶヴユン