Operating instructions

Table Of Contents

- 62 -

≥ The time code will reset when the built-in lithium battery is exhausted when it is set to

[FREE RUN].

You can set the initial time code.

1 Select the menu.

2 Touch the item to set and change with / .

≥ It will be set to 00h00m00s00f when the [Reset] is touched.

≥ “h” is an abbreviation for hour, “m” for minute, “s” for second and “f” for frame.

3 Touch [EXIT] to complete the setting.

Setting the Recording Counter

Recording Counter will display the recording time in seconds.

0:00:00 (hour : minute : second (When [REC COUNTER] is set to [TOTAL]))

SCN 0:00:00 (hour : minute : second (When [REC COUNTER] is set to [SCENE]))

Select the counting method during the recording.

Select the menu.

To reset the Recording Counter for the Recording

Mode

The Recording Counter will be set to 0:00:00 when is

touched while displaying the counter.

[TC PRESET]

: [RECORD SETUP] # [TC PRESET]

[REC COUNTER]

: [DISP SETUP] # [REC COUNTER] # desired setting

[TOTAL]: The count continues to increase until the Recording Counter is reset.

[SCENE]: Resets the Recording Counter at start of recording. Counts the time

of each recording session.

RESET COUNT

DISP/

MODE

O.I.S. BARS

ZEBRA

RESET