Operating instructions

Table Of Contents

- 53 -

≥ To return to Auto Gain Mode, perform one of the following operations:

j Touch .

j Set the iA/MANUAL/FOCUS switch to iA to switch to Intelligent Auto Mode.

≥ It is not possible to adjust the [GAIN] in the following situations:

j When a setting in [SCENE MODE] is enabled (l 110)

j During Freeze Frame (l 69)

≥ If the gain value is increased, the noise on the screen increases.

≥ In Auto Iris Mode or Auto Shutter Mode, the screen brightness may not change even if you adjust

the gain. (l 51, 57)

∫ Changing the maximum possible gain value for Auto Gain Mode

≥ Switch to Manual Mode. (l 40)

Select the menu.

≥ [AGC LIMIT] is not available when a setting in [SCENE MODE] is enabled. (l 110)

You can use Super Gain by registering <SUPER GAIN> to a USER button.

Super Gain allows you to set the gain value to 33 dB or 36 dB.

≥ Please refer to page 63 for details about setting the USER button.

≥ Switch to Manual Mode. (l 40)

Press the USER button to which <SUPER GAIN> is registered or touch the

applicable USER button icon.

≥ To cancel Super gain, press the USER button or touch the USER button icon again.

∫ To change the gain value of Super Gain

Select the menu.

≥ Super Gain is not available in the following cases:

j In Intelligent Auto Mode

j When a setting in [SCENE MODE] is enabled (l 110)

j During Freeze Frame (l 69)

≥ Super Gain will be canceled when the unit is turned off.

: [SW SETUP] # [AGC LIMIT] # desired setting

[3 dB]/[6 dB]/[9 dB]/[12 dB]/[15 dB]/[18 dB]/[21 dB]/[24 dB]/[27 dB]/[30 dB]

Super Gain

: [SW SETUP] # [SUPER GAIN] # desired setting

[33 dB]/[36 dB]

GAIN

MANUAL