Operating instructions

- 52 -
∫ To enable Backlight Compensation
If you enable [BACKLIGHT COMPENS.] in Auto Iris Mode, automatic iris control will be activated for
backlight compensation, brightening the screen image by preventing subjects from appearing dark
when there is a light source behind them.
Select the menu. (l 34)
≥ appears when it is set.
≥ It will return to standard Auto Iris Mode ( ) when it is canceled. (l 51)
≥ You can also change the setting using the USER button to which <BACKLIGHT> is registered
(l 66)
≥ This function is not available in the following cases:
j When [SCENE MODE] is set to [Fireworks] (l 110 )
j During Freeze Frame (l 69)
≥ Backlight Compensation is canceled when you turn off this unit.
Gain adjustment
≥ Use the jog dial to change the settings.
≥ Switch to Manual Mode. (l 40)
1 Touch the LCD monitor in the recording screen.
≥ Operation icons are displayed.
2 Touch to switch to Manual Gain Mode.
≥ The gain value will be displayed in dB.
3 Adjust the gain by rotating the jog dial.
Gain value:
0dB to 30dB
≥ Value closer to 0dB darken the image.
≥ Value closer to 30dB brighten the image.
: [CAMERA SETUP] # [BACKLIGHT COMPENS.] # [ON]
A Jog dial
B Gain value
≥ In Auto Gain Mode, “AGC” is displayed; in
Manual Gain Mode, the gain value is
displayed in dB.
C [GAIN]
MENU

ヴユロバヱヶヴラチヴユヵ
GAIN
AUTO

0dB

GAIN
AUTO