Operating instructions

- 48 -
∫ To adjust the magnified display
If you set Focus Assist to ON by following either of the procedures below, the central area of the
screen will be magnified. You can change the magnification and position of the magnified display.
j Setting the menu item [FOCUS ASSIST 1] to [EXPAND] or [BOTH] and pressing the USER
button to which <FOCUS ASSIST 1> is registered.
j Setting the menu item [FOCUS ASSIST 2] to [EXPAND] and pressing the USER button to
which <FOCUS ASSIST 2> is registered.
≥ You can also change the magnification level of the magnified display using the jog dial.
(To change the magnification level)
Touch / or rotate the jog dial to change the magnification level.
≥ You can adjust the magnification from 3k to 10k.
(Moving the magnified area)
Touch / / / or slide the screen while touching it to move the magnified
area.
Using Focus Assist
≥ Register <FOCUS ASSIST 1> or <FOCUS ASSIST 2> to a USER button. (l 63)
≥ Switch to Manual Focus Mode. (l 45)
Press the USER button to which <FOCUS ASSIST 1> or <FOCUS ASSIST 2> is
registered or touch the applicable USER button icon.
≥ To cancel, perform one of the following operations:
j Press the USER button again, or touch the USER button icon again.
j Touch [EXIT].
A 3k–5k display
B 5.5
k–10k display
C [ASSIST]
D Magnified display
E [EXIT]
F Jog dial
: Increases the magnification level by 0.5k.
: Decreases the magnification level by 0.5k.
x3.0
x3.0x3.0



x5.5
x5.5x5.5
 

ヴユロバヱヶヴラチヴユヵ
