Operating instructions

- 47 -
Push AF
If you press and hold the USER button to which <PUSH AF> is registered, Manual Focus will be
temporarily switched to Auto Focus.
≥ This function is registered to the USER1 button by default.
≥ Set this unit to Manual Focus. (l 45)
Press and hold the USER button to which <PUSH AF> is registered or touch and
hold the applicable USER button icon.
≥ The focus position will be automatically adjusted for the subject at the center of the screen.
≥ If you set [AREA MODE] to [FOCUS], [FOCUS/IRIS] or [FOCUS/Y GET] and use Area Mode, the
focus position will be automatically adjusted to the subject you have touched. (l 70)
≥ It will be canceled when the button is released, and the focus position set by the Push AF will be
maintained.
≥ Push AF does not work in following cases:
j When Auto Focus is used
Focus Assist
You can use Focus Assist by pressing the USER button to which <FOCUS ASSIST 1> or <FOCUS
ASSIST 2> is registered.
≥ For information on how to set the USER buttons, refer to page 63.
≥ <FOCUS ASSIST 1> is registered to the USER3 button by default.
∫ To select the Focus Assist method for the USER button to which
<FOCUS ASSIST 1> is registered
Select the menu.
∫ To select the Focus Assist method for the USER button to which
<FOCUS ASSIST 2> is registered
Select the menu.
≥ You can use the magnified display and the peaking function separately or use them in
combination by selecting different settings for [FOCUS ASSIST 1] and [FOCUS ASSIST 2].
≥ If [FOCUS ASSIST 1] is set to [BOTH], [FOCUS ASSIST 2] is not available. In addition, the USER
button to which <FOCUS ASSIST 2> is registered is disabled.
Selecting a Focus Assist method
: [SW SETUP] # [FOCUS ASSIST 1] # desired setting
[EXPAND]: Magnifies the central area of the screen when Focus Assist is used.
[PEAKING]: Highlights in-focus portions with color when Focus Assist is used.
[BOTH]: Sets both [EXPAND] and [PEAKING].
: [SW SETUP] # [FOCUS ASSIST 2] # desired setting
[EXPAND] / [PEAKING]
MENU
MENU