Operating instructions

Table Of Contents

- 46 -

∫ To emphasize the outline of images

Setting [EVF/LCD DETAIL] to [ON] helps you achieve focus easier by emphasizing the outlines of

an image displayed on the LCD monitor and viewfinder.

You can also adjust the emphasis level or change the frequency.

≥ You can also enable or disable this function with the applicable USER button. (l 71)

≥ These settings will not affect the images actually recorded.

Adjusting the level of [EVF/LCD DETAIL]

1 Select the menu.

2 Touch / to adjust settings.

≥ You can select a value between s3 and r3.

3 Touch [EXIT] to complete the setting.

Setting the peaking frequency of [EVF/LCD DETAIL]

Select the menu.

≥ [EVF/LCD DETAIL] is canceled in following cases:

j When Focus Assist (peaking function) is used (l 47)

One Push AF

If you press the USER button to which <PUSH AF> is registered in Manual Focus Mode, the

camera performs high-speed focusing until the image is focused.

≥ This function is registered to the USER1 button by default.

≥ Switch to Manual Focus Mode. (l 45)

Press the USER button to which <PUSH AF> is registered or touch the applicable

USER button icon.

≥ Auto Focus will be activated and the camera will perform high-speed focusing until the image is

focused.

≥ The focus setting returns to Manual Focus Mode once the image is focused or a certain time has

elapsed.

≥ One Push AF does not work in following cases:

j When Auto Focus is used

: [DISP SETUP] # [EVF/LCD DETAIL] # [ON]

: [DISP SETUP] # [EVF/LCD PEAK LEVEL]

: [DISP SETUP] # [EVF/LCD PEAK FREQ.] # [HIGH] or [LOW]