Operating instructions

- 45 -
Use the multi-manual ring to adjust focus. If auto focusing is difficult due to the conditions, then use
Manual Focus.
≥ Switch to Manual Mode. (l 40)
1 Slide the iA/MANUAL/FOCUS switch to the FOCUS position.
≥ The iA/MANUAL/FOCUS switch will return to the MANUAL position.
≥ It will switch to MF from AF.
≥ The manual ring setting will change to [ FOCUS].
2 Rotate the multi-manual ring to adjust the focus.
≥ The focus value can be set from MF00 (focus distance: approximately 3 cm) to MF99 (focus
distance: infinity). The larger the focus value gets, the further the position where focus is
achieved.
≥ If you slide and hold the iA/MANUAL/FOCUS switch towards FOCUS, the focus will be adjusted
to MF95 on the infinity side.
≥ To return to Auto Focus, perform one of the following operations:
j Set the iA/MANUAL/FOCUS switch to FOCUS again.
j Set the iA/MANUAL/FOCUS switch to iA to switch to Intelligent Auto Mode.
≥ When the distance to the subject approaches within 1.5 m approx., the unit switches to the macro
range and or . (The unit may switch to the macro range even when the distance to the
subject is 1.5 m or more depending on the subject.).
≥ Depending on the zoom magnification, this unit may fail to switch to the macro range, or go to a
non-displayed focus value.
≥ When you perform a zoom operation in the macro range, this unit may go out of focus.
≥ This item cannot be set during Freeze Frame. (l 69)
Recording
Focus
A Multi-manual ring
B iA/MANUAL/FOCUS switch
C Manual ring setting [FOCUS]
ヮモワヶモロ
ョヰヤヶヴ


