Operating instructions
Table Of Contents
- Information for Your Safety
- Accessories
- Optional accessories
- Preparation
- Recording
- Before recording
- Selecting a media to record
- Recording motion picture
- Recording still pictures
- Intelligent Auto Mode/Manual Mode
- Using the zoom
- Using the Built-in LED Light
- Manual Recording
- Focus
- Iris/Gain adjustment
- White Balance
- Manual shutter speed
- Audio Input
- Counter display
- USER button
- Using Operation Icons
- Using of jog dial
- Playback
- Editing
- Linking to external devices
- Menu
- Display
- Others
- 133 -
The ring LED lights up red during recording.
≥ When the [REC LAMP] is set to [OFF], this item cannot be set.
The unit is put into recording pause approx. 1 second when the unit is turned on.
≥ Depending on the recording conditions, start time may be longer than 1 second.
≥ In the Quick Power On Mode, the zoom magnification becomes approx. 1k.
Touch screen operation, start and stop of recording can be confirmed with this sound.
When [OFF] is selected, the sound is not output at the start/end of recording, etc.
2 Beeps for 4 times
When an error occurs. Check the message displayed on the screen. (l 141)
When about 5 minutes have passed without any operation, this unit automatically turns off to save
battery life.
≥ This unit will not automatically turn off even if the [ECONOMY (BATT)] is set to [ON] in following
cases:
j PRE-REC is used (l 74, 124)
When connected to AC adaptor about 15 minutes have passed without any operation, this unit
automatically turns off.
≥ This unit will not automatically turn off even if the [ECONOMY (AC)] is set to [ON] in following
cases:
j PRE-REC is used (l 74, 124)
[RING LED (RED)]
[ON]/[OFF]
[QUICK POWER ON]
[ON]/[OFF]
[ALERT SOUND]
[OFF]/ (Volume low)/ (Volume high)
[ECONOMY (BATT)]
[ON]/[OFF]
[ECONOMY (AC)]
[ON]/[OFF]