Operating instructions
Table Of Contents
- Information for Your Safety
- Accessories
- Optional accessories
- Preparation
- Recording
- Before recording
- Selecting a media to record
- Recording motion picture
- Recording still pictures
- Intelligent Auto Mode/Manual Mode
- Using the zoom
- Using the Built-in LED Light
- Manual Recording
- Focus
- Iris/Gain adjustment
- White Balance
- Manual shutter speed
- Audio Input
- Counter display
- USER button
- Using Operation Icons
- Using of jog dial
- Playback
- Editing
- Linking to external devices
- Menu
- Display
- Others
- 120 -
You can set the peaking strength for Focus Assist. (l 49)
≥ This function’s default setting is “0”.
You can set an Area Mode effect. (l 70)
This sets the display duration of the zebra display.
You can switch the type of color bars to be displayed when you press the BARS button. (l 79)
Enable/disable of the sub recording start/stop button on the handle can be switched.
Enable/disable of the sub zoom lever on the handle can be switched. Zoom speed will be different
depending on the setting.
≥ The larger the value is, the faster the zoom speed becomes, and vice versa.
[PEAKING LEVEL]
[AREA MODE]
[INH]/[FOCUS]/[IRIS]/[Y GET]/[FOCUS/IRIS]/[FOCUS/Y GET]
[ZEBRA MODE]
[CONTINUE]: Displays the zebra display until it is switched to another zebra display setting.
[MOMENT]: Displays the zebra display for approximately 5 seconds.
[BARS TYPE]
[TYPE 1] [TYPE 2] [TYPE 3]
[SUB REC BUTTON]
[INHIBIT]/[ACTIVE]
[SUB ZOOM]
[OFF]/[1]/[2]/[3]/[4]/[5]/[6]/[7]