Operating instructions
Table Of Contents
- Information for Your Safety
- Accessories
- Optional accessories
- Preparation
- Recording
- Before recording
- Selecting a media to record
- Recording motion picture
- Recording still pictures
- Intelligent Auto Mode/Manual Mode
- Using the zoom
- Using the Built-in LED Light
- Manual Recording
- Focus
- Iris/Gain adjustment
- White Balance
- Manual shutter speed
- Audio Input
- Counter display
- USER button
- Using Operation Icons
- Using of jog dial
- Playback
- Editing
- Linking to external devices
- Menu
- Display
- Others
- 113 -
Selects the DRS (Dynamic Range Stretcher) function. (l 69)
≥ Switch to Manual Mode. (l 40)
This function detects the horizontal tilt of the unit, and automatically corrects it to the level position.
(l 72)
If you set this item to [ON], you can compensate for and reduce flash band, a phenomenon that
creates markedly different levels of luminance between the top and bottom of the image when
recording is performed in an environment where another camera is firing its flash. (l 73)
≥ Switch to Manual Mode. (l 40)
You can control the noise reduction effect and afterimage intensity by adjusting the noise reduction
setting.
1 Touch [NR CONTROL].
2 Touch / to adjust settings.
≥ You can select a value between s5 and r5.
≥ Adjusting the setting in the minus (s) direction weakens the noise reduction effect, thereby
reducing afterimages. Note that this also tends to increase noise.
≥ Adjusting the setting in the plus (r) direction enhances the noise reduction effect, thereby
reducing noise. Note that this may also cause afterimages to appear more frequently.
3 Touch [EXIT] to exit the menu screen.
≥ The default setting is 0.
[DRS]
[ON]/[OFF]
[LEVEL SHOT]
[ON]/[OFF]
[FLASH BAND COMPENSATION]
[ON]/[OFF]
[NR CONTROL]