Operating instructions

- 109 -
∫ Dubbing using equipment without an SD card slot or using a video
device
You can dub by connecting an AV cable (commercially-available).
≥ Use the AC adaptor to free you from worrying about the battery running down.
A AV cable (commercially-available)
≥ Insert the plugs as far as they will go.
≥ Set the mode switch to . (l 26)
1 Connect this unit to a video device and start playback on this unit.
2 Start recording on the connected device.
≥ To stop recording (dubbing), stop playback on this unit after stopping recording on the recorder.
≥ To play back scenes that are not found in the recording format option [SA 576/50.00i], set
[RESOLUTION] to [DOWN CONV.]. (l 99)
≥ Some screens, such as the menu screen, may be displayed in reduced sizes on the TV.
≥ If the date and time display and function indication are not wanted, cancel them before dubbing.
(l 99, 129)
Dubbing in standard picture quality
Change the video input on the video device and TV that this unit is connected
to.
≥ The channel set will differ depending on the terminal to which the unit is connected. (See the
operating instructions of the video device and TV for details.)
If the dubbed images are played back on a wide-screen TV, the images may be stretched
vertically.
In this case, refer to the operating instruction for the device you are connecting to or read the
operating instructions of the wide-screen TV and set the aspect ratio to 16:9.
VIDEO IN
AUDIO IN
VIDEO
OUT
AUDIO
OUT
L
R
