Basic Operating Instructions

46
DVQX1101 (ENG)
Please refer to “Operating Instructions (PDF format)” for details.
Recording
Problem Check points
The unit arbitrarily stops
recording.
≥ Use an SD card that can be used for motion picture recording.
(l 26)
≥ The recordable time may have shortened due to the
deterioration of the data writing speed or repeated recording
and deletion. Using the unit, format the SD card. (l 32)
Color or brightness of the
image changes, or you
may see horizontal bars in
the image.
The LCD monitor flickers
indoors.
≥ Color or brightness of the image may change, or you may see
horizontal bars in the image when the object is recorded
under fluorescent light, mercury light or sodium light, etc., but
this is not a malfunction.
≥ Change settings as follows:
j Set this unit to Auto Shutter Mode.
j Adjust the shutter speed to 1/50, 1/60 or 1/100.
≥ Adjust the Synchro Scan shutter speed.
Playback
Problem Check points
Scenes/still pictures
cannot be played back.
≥ Any scenes/still pictures where the thumbnails are displayed
as cannot be played back.
≥ In most cases, is displayed for the following scenes:
j Scenes recorded with another device or edited with editing
software
j Scenes with damaged data
≥ The thumbnails of scenes with a different system frequency
are indicated with . You can play them back by changing
the [SYSTEM FREQ] setting. (l 32)
HC-X1_PP_Simple.book 46 ページ ２０１６年１１月１日 火曜日 午前９時４８分