Basic Operating Instructions

15
(ENG) DVQX1101
Connect an external monitor to output images.
*1 Use a commercially-available AV cable.
*2 Use a commercially-available High Speed HDMI cable.
If possible, we recommend using a cable with a length of 3 m (9.84 feet) or less.
Remote operations with an iPad
Attaching a wireless module that support this unit (AJ-WM50, AJ-WM30: optional*) to the USB
HOST terminal of this unit allows you to connect to a wireless LAN network. You can perform the
following operations by connecting this unit and an iPad on which the AG ROP application is
installed:
≥ Checking the camera status
≥ Checking the thumbnail images of recorded scenes
≥ Playing back scenes recorded as sub recordings with [DUAL CODEC REC] set to [FHD 8Mbps]
≥ Controlling the camera remotely (recording control and Time Code/User Information operations)
* It may not be available in some countries.
A USB 3.0 (Host mode)
B External media device (commercially-available)
Connecting to an external monitor
A AV cable*
1
B HDMI cable*
2
C External monitor
When connecting with an HDMI cable using an HDMI-to-DVI converter, etc., be sure to
connect the HDMI cable to the connector of this unit last.
Connecting the HDMI cable to the connector of this unit first may result in malfunction.





HC-X1_PP_Simple.book 15 ページ ２０１６年１１月１日 火曜日 午前９時４８分