Advanced User Guide

- 82 -

You can set the initial time code.

1 Select the menu.

2 Touch the item to set and change with / .

≥ The value will be set to 00h00m00s00f if you press the RESET button.

≥ “h” is an abbreviation for hour, “m” for minute, “s” for second and “f” for frame.

3 Touch [EXIT] to complete the setting.

≥ This unit will adjust the time code in accordance with the frame rate of the [REC FORMAT]

(l 163). Therefore, it may not be continuous from the previous final time code when the

recording format is changed.

≥ If the frame rate in [REC FORMAT] is set to 23.98p, set the number of frames to [00] or a multiple

of 4. If you enter a different value, time code will not be recorded correctly.

Setting the User Information

Eight digit hexadecimal alphanumeric can be entered and displayed as a memo information such as

dates, control numbers, etc., into the User Information.

UB 00 00 00 00

≥ This is displayed only when [REC MODE] is set to [AVCHD]. (l 162)

You can set the User Information.

≥ Set [REC MODE] to [AVCHD]. (l 162)

1 Select the menu.

2 Touch the item to set and change with / .

≥ You can use numbers from 0 to 9 and letters from A to F.

≥ The value will be set to 00 00 00 00 if you press the RESET button.

3 Touch [EXIT] to complete the setting.

[TC PRESET]

: [RECORD SETUP] # [TC PRESET]

[UB PRESET]

: [RECORD SETUP] # [UB PRESET]

HC-X1_PP_DVQP1173ZA_eng.book 82 ページ２０１６年１１月２８日　月曜日　午前１１時４９分