Advanced User Guide

- 187 -
≥ In the following cases, even when [TIME STAMP] is set to [ON], the date and time of recording
are not displayed:
j When [REC FORMAT] is set to [SA 480/59.94i] or [SA 576/50.00i] (l 163)
j When [2 SLOTS FUNC.] is set to [DUAL CODEC] (l 179)
j When [DATE/TIME] is set to [OFF]
j During Freeze Frame (l 91)
j During Super Slow Recording (l 105)
j In Variable Frame Rate Mode (l 102)
≥ Even when [VIDEO OUT OSD] is set to [OFF], the date and time of recording are displayed on
the external monitor screen. (l 129)
≥ The date and time of recording displayed during [TIME STAMP] recording and the date and time
displayed during the playback of the image may not exactly be the same.
Selects the compensation mode for the time code. (l 81)
≥ Set [SYSTEM FREQ] to [59.94Hz]. (l 162)
Sets the way the time code will move. (l 81)
Initial value of the time code can be set. (l 82)
≥ Set [REC MODE] to [AVCHD]. (l 162)
User Information can be set. (l 82)
[DF MODE]
[DF]/[NDF]
[TCG]
[FREE RUN]/[REC RUN]
[TC PRESET]
[UB PRESET]
HC-X1_PP_DVQP1173ZA_eng.book 187 ページ ２０１６年１１月２８日 月曜日 午前１１時４９分