Advanced User Guide

- 127 -
Headphones
You can connect headphones (commercially-available) to the headphone output jack (3.5 mm
(0.14 q) diameter stereo mini jack).
Sound is not output from the speaker when headphones are connected.
Remote control
You can connect a remote control (commercially-available) to either of the CAM REMOTE terminals
(FOCUS IRIS or ZOOM S/S).
Connecting a remote control to the FOCUS IRIS terminal (3.5 mm (0.14 q) diameter mini jack)
allows you to remotely control the focus and iris.
Connecting a remote control to the ZOOM S/S terminal (2.5 mm (0.1 q) diameter super-mini jack)
allows you to remotely control the zoom and start/stop recording.
Do not connect any device other than a remote control to the CAM REMOTE terminals. Doing so
may change the image brightness or cause the image to be out of focus.
(When a remote control is connected to the FOCUS IRIS terminal)
Priority for iris adjustment is given to the remote control. It is not possible to adjust the iris with the
iris ring of this unit.
If you switch to Auto Mode when [A.IRIS] is set to [ON], the remote control cannot be used.
Linking to external devices
Connecting Headphones, a Remote
Control or an External Monitor
A Headphone output jack
B FOCUS IRIS terminal
C ZOOM S/S terminal
HC-X1_PP_DVQP1173ZA_eng.book 127 ページ 2016年11月28日 月曜日 午前11時49分