User Guide
Table Of Contents
- Contents
- Getting Started 1
- Basic Operation 8
- Phonebook 12
- Personalising Your Phone 18
- Add a Start-up Greeting 18
- Displaying Animations 18
- Changing the Ring Tone 18
- Disabling all Tones 20
- Download Melody 21
- Setting the Backlight Colour 21
- Setting the Backlight Time 21
- Using Voice Commands 21
- Selecting Vibration Alert Type 23
- Changing the Language 23
- Restoring the Default Phone Settings 23
- Phone Security 24
- Applications 27
- Short Text Messages 31
- Call Information 36
- Advanced Operation 39
- Schedule 44
- Games 47
- WAP Browser 49
- Internet E-mail 54
- Additional Features 58
- Text Entry 62
- Menu Structure 64
- Trouble Shooting 65
- Important Information 68
- Care and Maintenance 70
- Glossary of Terms 71
- Specifications 73
- Panasonic GSM Mobile Telephone 74
- EU Warranty 76
- Personal Record 81
- Notes 83
Adjusting the Alarm Time
1 From Idle mode press Q, select Applications > Clock
Function > Alarm Set and press Q
2 Use e to select the alarm to be adjusted and press Q
3 Press and hold B to remove the current alarm time
4 Enter the digits for the time and press Q
5 Use e to select the frequency of the alarm and press Q
6 Use e to select the ring type and press Q
Setting a Power On/Off Time
You can set your phone to turn itself on or off automatically at a
specified time using the Power On/Off feature. The procedure for
setting/adjusting the Power On/Off automatically is similar to that for
setting the time on the clock. For either setting or adjusting the time
you need to select Power On Time or Power Off Time in the Clock
Function menu.
Caution: Ensure that the setting of the Alarm or Power On function
will not contravene any regulations whereby it may automatically
power on when in an aircraft or medical facility etc. - see “Important
Information” page 68.
Calculator
The four function calculator will enable you to perform simple
arithmetic calculations (addition/subtraction/multiplication and
division).
1 From Idle mode press Q, select Applications > Calculator
and press Q
2 Enter a number (maximum 10 digits) and it will be displayed on
the lower line
3 Use g to select the arithmetic operation you wish to perform
(b to multiply, c to add, a to divide, d to subtract)
4 Enter a number (maximum 10 digits) and it will be displayed
next to the operation symbol
29
Applications