User Guide
Table Of Contents
- Contents
- Getting Started 1
- Basic Operation 8
- Phonebook 12
- Personalising Your Phone 18
- Add a Start-up Greeting 18
- Displaying Animations 18
- Changing the Ring Tone 18
- Disabling all Tones 20
- Download Melody 21
- Setting the Backlight Colour 21
- Setting the Backlight Time 21
- Using Voice Commands 21
- Selecting Vibration Alert Type 23
- Changing the Language 23
- Restoring the Default Phone Settings 23
- Phone Security 24
- Applications 27
- Short Text Messages 31
- Call Information 36
- Advanced Operation 39
- Schedule 44
- Games 47
- WAP Browser 49
- Internet E-mail 54
- Additional Features 58
- Text Entry 62
- Menu Structure 64
- Trouble Shooting 65
- Important Information 68
- Care and Maintenance 70
- Glossary of Terms 71
- Specifications 73
- Panasonic GSM Mobile Telephone 74
- EU Warranty 76
- Personal Record 81
- Notes 83
Setting the Clock for Summer Time
1 From Idle mode press Q, select Applications > Clock
Function > Clock Set > Home > Summer Time
2 Press Q to set Summer Time On or Off
Setting the Alarm
If you have not already set the clock, you will be prompted to do so
prior to setting the alarm.
There are four separate alarms, each of which may be set
independently.
1 From Idle mode press Q, select Applications > Clock
Function > Alarm Set and press Q
2 Use e to select the alarm to be set and press Q
3 Enter the digits for the time and press Q
4 Use e to select the frequency of the alarm and press Q
5 Use e to select the ring type and press Q
Once the alarm has been set, ? will be displayed when the phone is
in Idle mode.
The alarm is activated in accordance with the current clock (Home or
Second)
Muting the Alarm
When the set time is reached the alarm will sound and the display
will flash with an alarm message. The alarm will sound for 30
seconds. If the alarm is due during a call, it will activate vibration
alert.
To end the alarm:
Press any key
Disabling the Alarm
1 From Idle mode press Q, select Applications > Clock
Function > Alarm Set and press Q
2 Use e to select the alarm to be disabled and press Q twice
3 Use e to select Disabled and press Q
Once disabled, following the same procedure will re-enable the
alarm.
28
Applications