User Guide
Table Of Contents
- Contents
- Getting Started 1
- Basic Operation 8
- Phonebook 12
- Personalising Your Phone 18
- Add a Start-up Greeting 18
- Displaying Animations 18
- Changing the Ring Tone 18
- Disabling all Tones 20
- Download Melody 21
- Setting the Backlight Colour 21
- Setting the Backlight Time 21
- Using Voice Commands 21
- Selecting Vibration Alert Type 23
- Changing the Language 23
- Restoring the Default Phone Settings 23
- Phone Security 24
- Applications 27
- Short Text Messages 31
- Call Information 36
- Advanced Operation 39
- Schedule 44
- Games 47
- WAP Browser 49
- Internet E-mail 54
- Additional Features 58
- Text Entry 62
- Menu Structure 64
- Trouble Shooting 65
- Important Information 68
- Care and Maintenance 70
- Glossary of Terms 71
- Specifications 73
- Panasonic GSM Mobile Telephone 74
- EU Warranty 76
- Personal Record 81
- Notes 83
Using the PIN
The PIN (Personal Identification Number) protects your SIM against
unauthorized use. If you enable the PIN, every time the phone is
turned on you will be prompted to enter the PIN.
The PIN2 controls security for the Fixed Dial Store, Call Charge
metering and Barred Dial.
Enabling/Disabling the PIN
1 From Idle mode press Q, select Phone Menu > Security >
PIN and press Q
2 Use a select Enable / Disable or Change the PIN and press
Q
3 Enter PIN (Between 4 and 8 digits) and press Q
Setting Vibration Alert
When vibration alert is switched on the phone will vibrate when a call
is received. Switching on vibration alert will silence the ring volume.
If, however, the ring volume is adjusted after the vibration alert is
switched on, the phone will ring and vibrate when a call is received.
From Idle mode:
Press and hold # to switch on or off. When activated, the
phone will vibrate briefly.
Setting Ring and Key Volume
Changing either the ring volume and key volume is done in the same
manner. If you increase the ring volume above maximum it will set an
escalating ring tone. If you turn the ring volume off, the silent
indicator icon ([) will be displayed.
1 From Idle mode press Q, select Personalise > Tones and
press Q
2 Select Ring Volume or Key Volume and press Q
3 Use e to set the volume level and press Q
11
Basic Operation