User Guide
Table Of Contents
- Contents
- Getting Started 1
- Basic Operation 8
- Phonebook 12
- Personalising Your Phone 18
- Add a Start-up Greeting 18
- Displaying Animations 18
- Changing the Ring Tone 18
- Disabling all Tones 20
- Download Melody 21
- Setting the Backlight Colour 21
- Setting the Backlight Time 21
- Using Voice Commands 21
- Selecting Vibration Alert Type 23
- Changing the Language 23
- Restoring the Default Phone Settings 23
- Phone Security 24
- Applications 27
- Short Text Messages 31
- Call Information 36
- Advanced Operation 39
- Schedule 44
- Games 47
- WAP Browser 49
- Internet E-mail 54
- Additional Features 58
- Text Entry 62
- Menu Structure 64
- Trouble Shooting 65
- Important Information 68
- Care and Maintenance 70
- Glossary of Terms 71
- Specifications 73
- Panasonic GSM Mobile Telephone 74
- EU Warranty 76
- Personal Record 81
- Notes 83
Caller Identification
This feature allows you to identify incoming calls and accept or reject
them. The caller’s phone number, and name if stored in Phonebook,
will be displayed.
Note: Caller Identification may not always be available.
Earpiece Volume Control
The volume level may be adjusted during a call:
Use a to decrease the volume
Use b to increase the volume
Volume control for Personal Handsfree accessory is adjusted in the
same manner.
Locking the Phone
With the Phone Lock enabled you will be restricted to answer
incoming calls and make emergency calls only. The Phone Lock
Code is factory set to “0000”.
1 From Idle mode press Q, select Phone Menu
> Security > Phone Lock and press Q
2 Enter the 4-digit code and press Q
The phone will be locked and the lock icon (O) will
be displayed.
Unlocking the Phone
To restore normal operation, enter your Lock Code and press Q.
The lock icon will be removed from the display. However, once you
turn the phone off and on again you will need to re-enter the Lock
Code, and when the correct code has been entered Ok will be
displayed. Press Q.
Disabling Phone Lock
The phone must be unlocked before the phone lock can be disabled.
1 From Idle mode press Q, select Phone Menu > Security >
Phone Lock and press Q
2 Select Disable press Q
3 Enter the 4-digit code and press Q
10
Basic Operation