FP0 Series Programmable Controller Panasonic ... the new name for CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.
FP0_broschüre_4093 euen0904 15.10.2004 8:42 Uhr Seite 2 FP0 – Super Compact PLC Incredibly small, alone or even as multiple combined units From I/O 10-points… ➝ 30.4mm 25mm ➝ Actual size Input/output terminal 90mm AC Power Supply: • Supply voltage 85 to 265VAC • Output 24VDC/ 0.7A for FP0 PLC (DC type) 90mm The photo shows an I/O 14-point control unit. This size is uniform for all except the I/O 32-point control unit.
FP0_broschüre_4093 euen0904 15.10.
FP0_broschüre_4093 euen0904 15.10.
FP0_broschüre_4093 euen0904 15.10.
FP0_broschüre_4093 euen0904 15.10.2004 8:42 Uhr Seite 6 FP0 – Impressive Capabilities High specifications for both speed and capacity 0.9µs per basic instruction. Pulse catch and interrupt input functions meet the need for high-speed response. High-speed execution Execution speed of 0.9µs per basic instruction. 500 steps program yields a scanning time of 1ms, which means the FP0 boosts the fastest processing time among the products of this class.
FP0_broschüre_4093 euen0904 15.10.2004 8:42 Uhr Seite 7 FP0 – Impressive Capabilities FP0 functions Equipped with 2-axis independent positioning and high-speed counter for support of PWM output. Pulse output function (For transistor output type only) The unit comes equipped with 2 channels for the output of up to 10kHz pulses (5kHz during 2-channel output). Since these two channels can be separately controlled, the PLC is also suitable for independent 2-axis positioning.
FP0_broschüre_4093 euen0904 15.10.2004 8:42 Uhr Seite 8 FP0 Communication Serial interfaces and modem compatible Communication – Simple and efficient via two serial interfaces: TOOL-Port and COM-Port (RS232C interface). Programming interface TOOL-Port (also for communication) In Computer Link mode, this port offers access to the entire FP0 memory area.
FP0_broschüre_4093 euen0904 15.10.2004 8:42 Uhr Seite 9 FP0 Communication Easier maintenance than ever before Maintenance saving Program memory uses EEPROM. In addition, programs can be changed even in RUN mode! ■ Overwrite function in RUN mode It is possible to overwrite a program while the FP0 is running, such as during program debugging and startup adjustments. ■ Backup battery unnecessary The program memory uses EEPROM.
FP0_broschüre_4093 euen0904 15.10.2004 8:43 Uhr Seite 10 FP0 PROFIBUS DP Slave or Remote I/O Unit For cost effective control of distributed field device The FP0 DPS2 can operate either as a DP slave module or as a remote I/O system to which different decentralised inputs and outputs can be connected. A DIP switch can be used to switch between the two modes: Mode 1: DP-Slave module. Connect the FP0 or FP∑ (Sigma) CPU + expansion modules to the PROFIBUS network. Mode 2: Remote I/O.
FP0_broschüre_4093 euen0904 15.10.2004 8:43 Uhr Seite 11 FP0 S-LINK Unit Connects directly to the S-LINK for reduced wiring S-Link is a system which simplifies connection of rapidly increasing control devices accompanying progressing automation and is useful in reducing your costs and construction time. Features 1. Small size of only W30 x H90 x D60 mm. Makes use of the T-shaped connectability of the S-LINK for reduced wiring and reduced size of the control panel. 2.
FP0_broschüre_4093 euen0904 15.10.2004 8:43 Uhr Seite 12 FP0 MEWNET-F Unit Networking units MEWNET-F The FP0 can be used as a slave station for MEWNET-F (remote I/O system) by adding I/O link unit. MEWNET-F is a reduced-wiring remote I/O system that connects PLCs located separately and I/O slave stations with 2-core cabling. By adding an I/O link unit to the FP0, you can link master station PLC and FP0 inputs and outputs via the network.
FP0_broschüre_4093 euen0904 15.10.2004 8:43 Uhr Seite 13 FP0 Thermocouple Input Expansion Units Enable high precision temperature control at low cost The FP0-TC4 and FP0-TC8 thermocouple units are suitable for user friendly temperature acquisition using standard thermocouples with high precision. Temperature control ■ Up to three units can be added to each control unit, enabling temperature control of up to 24 channels.
FP0_broschüre_4093 euen0904 15.10.
FP0_broschüre_4093 euen0904 15.10.2004 8:43 Uhr Seite 15 Analogue Signal Processing FP0 Analogue Units General specifications Item Description Rated operating voltage 24VDC Operating voltage range 21.6 to 26.
FP0_broschüre_4093 euen0904 15.10.2004 8:43 Uhr Seite 16 FP0 RTD Input Expansion Unit User friendly acquisition of temperatures with high precision Features ■ The module can be easily installed in an existing system: Special connection cables, backplanes, and so forth are unnecessary as the expansion unit employs a stacking system that uses expansion connectors and lock levers on the surface of the unit itself. ■ Multiple RTD types are allowed in one module, creating a cost-effective solution.
FP0_broschüre_4093 euen0904 15.10.
FP0_broschüre_4093 euen0904 15.10.2004 8:43 Uhr Seite 18 FP0 Series Specification tables Interfaces Item Description Programming TOOL-Port RS232, mini DIN socket (5 pin), 9600 or 19200 BAUD, (8 data bits, odd parity, 1 stop bit), Computer link for programming and communication with MEWTOCOL.
FP0_broschüre_4093 euen0904 15.10.2004 8:43 Uhr Seite 19 Control FPWIN Pro PLC programming software conforming to IEC 61131-3 Control FPWIN Pro is the Matsushita programming software according to the international standard IEC 61131-3. Control FPWIN Pro works with the FP0 as well as any FP series programmable controller. Also, since the tool port is an RS232C, connection to a PC is easy – it only requires a single cable. No converter or adapter is required.
FP0_broschüre_4093 euen0904 15.10.2004 8:43 Uhr Seite 20 Control FPWIN GR PLC programming software for easy operation Features FP Series programming software for Windows. 1. To facilitate operation on site, a mouse is not required for input, search, write, monitor and timer edit operations. Everything can be accomplished with a keyboard alone. 2. Standard Windows operations, such as copy and paste, are included. 3. Supports all FP series machines. Software created with NPST-GR Ver.
FP0_broschüre_4093 euen0904 15.10.2004 8:43 Uhr Seite 21 Control CommX, PCWAY, OPC Server Visualisation software for ready made or customised solutions Control CommX The connection in ActiveX technology. ■ Connects your Visual Basic application to Matsushita PLCs. ■ Gives you the possibility to easily develop highly customised control solutions. ■ Create your own application very quickly by simply adding the functionality of ActiveX control to your code written with Visual Basic.
FP0_broschüre_4093 euen0904 15.10.
FP0_broschüre_4093 euen0904 15.10.
FP0_broschüre_4093 euen0904 15.10.2004 8:44 Uhr Seite 24 Accessories Products and order numbers Options Wiring tools Parts for attachment I/O cables & networks Attachment example Terminal screwdriver Slim attachment plate model Transistor output type I/O cable Necessary when wiring relay output type & terminals (Phoenix). Screw-stop attachment plate. Slim model.
FP0_broschüre_4093 euen0904 15.10.2004 8:44 Uhr Seite 25 Programming Tools and Current Consumption List Products and order numbers Programming software and cables Control FPWIN Pro English, German, French, Italian, Spanish, Japanese menu selectable. According to IEC 61131-3 Standard Control FPWIN Pro Ver.
FP0_broschüre_4093 euen0904 15.10.2004 8:44 Uhr Seite 26 FP0 Series Power Supplies Features ■ Incredibly small size: - FP0 power supply: 90 x 60 x 30.4mm - FP power supply: 115 x 75 x 42mm ■ Maximum output current: - FP0 power supply: 0.7A (24VDC) - FP power supply: 2.1A (24VDC) ■ Multiple voltage input: 85 to 265VAC ■ Optimal protection: overvoltage, overcurrent, overheating, etc.
FP0_broschüre_4093 euen0904 15.10.2004 11:55 Uhr Seite 27 FP0 Product Overview Order numbers 1.
