MSDS

2/5
Hazardous and Toxicity Class:
Class name : Not applicable
Hazard : In case of battery shortage, there is possibility of heat up of
battery and/or leakage.
Toxicity : In case of burning of plastic parts there is possibility of
gas generation, which has toxic for eyes, nose and throat.
First Aid Measures
In case of electrolyte leakage from the battery, necessary actions to be taken are described
as follows.
Eye contact : Flush the eyes with plenty of clean water such as tap water for
more than 15 minutes without rubbing and immediately
take a medical treatment.
If appropriate procedures are not taken, it may cause a loss of sight.
Skin contact : Wash the contact skin area off immediately with plenty of clean water
such as tap water using soap, otherwise it might cause sore on the skin.
Inhalation : Move the exposed person to fresh air area immediately.
And take a medical treatment immediately.
Fire Fighting Measures
1. Suitable fire extinguishing media are dry sand and chemical powder fire extinguisher.
2. When in firefighting, the air respiratory protection should be used because acrid or
harmful gas might be generated when fire is extinguished.
3. Remove combustibles at once from a firefighting area.
4. Remove the batteries to safe area at once from firefighting place.
Measures for electrolyte leakage (Accidental release measures)
(When the electrolysis liquid leaks from the product)
1. Wiping it off with the dry towel.
2. The fire should not be brought close to it.
3. The protection glasses and rubber gloves are put on if necessary.