Certifications 2

3/5
Fire Fighting Measures
Fire Fighting Measures Fire Fighting Measures
Fire Fighting Measures
1. Suitable fire extinguishing media are dry sand and chemical powder fire extinguisher.
2. When in firefighting, the air respiratory protection should be used because acrid or
harmful gas might be generated when fire is extinguished.
3. Remove combustibles at once from a firefighting area.
4. Remove the batteries to safe area at once from firefighting place.
Measures for electrolyte leakage (Accidental release measures)
Measures for electrolyte leakage (Accidental release measures)Measures for electrolyte leakage (Accidental release measures)
Measures for electrolyte leakage (Accidental release measures)
(When the electrolysis liquid leaks from the product)
1. Wiping it off with the dry towel.
2. The fire should not be brought close to it.
3. The protection glasses and rubber gloves are put on if necessary.
Handling and Storage
Handling and Storage Handling and Storage
Handling and Storage
1) The terminals of the battery pack should be protected in the packing form to be able to
prevent them from external short circuit.
2) They are packed by the material with enough strength to prevent them from destroyed
by vibrates, impact, fall and accumulation, etc. while transporting them.
3) Keep batteries out of water and wet when in storage and transported.
4) Keep batteries out of fire and avoid the high temperature atmosphere when in storage
and transported.
An example of the high temperature : The high temperature storage like in the car exposed
to blazing sun should be avoided.