Datasheet

Classification
No.
151-XB-JP00BE
Chip RF Jumper PRODUCT SPECIFICATION FOR INFORMATION
Subject
12 - 22
EXBD6JP000A
MATSUSHITA ELECTRONIC COMPONENTS CO., LTD.
14.3. Taping reel dimensions and material
180
11.4
±
2.0
9.0
±
1.0
60 min.
0
-3
Unit: mm
13.0
±
1.0
*
Material: PS
14.4. Taping specification
There shall be portions having no product in both the trailer and the leader of taping, and
there shall be portion having only cover tape in the leader of taping as shown below.
The component can fall headlong naturally from taping, when the cover tape was removed
and the component was moved upside down.
Trailer
40 mm min
.
Leader
400 mm min
.
20 pockets min.
Having chips Having no chips
Cover tape
Direction of feed
14.5. Top tape peeling strength
When the test shall be operated with the beloe conditions, cover tape peeling strength
should be 0.1 N to 1.0 N.
Direction of feed
Bottom tape
Carrier tape
Cover tape
Peeling direction
(Peeling speed: 300mm/min
±
10mm/min)
165
o
to 180
o