User Manual

3
URL : http://panasonic-electric-works.net/sunx
Overseas Sales Division (Head Office)
2431-1 Ushiyama-cho, Kasugai-shi, Aichi, 486-0901, Japan
Phone: [phone] FAX: [phone]
Europe Headquarter: Panasonic Electric Works Europe AG
Rudolf-Diesel-Ring 2, D-83607 Holzkirchen, Germany
Phone: [phone]
6 SPECIFICATIONS
Type
Thru-beam
Convergent
reflective
Front sensing Side sensing Front sensing Side sensing Front sensing Front sensing
Model no.
*1
*1
Model nos. with the suffix -PN are PNP output types. Model nos. with the suffix -R are inflection resistant cable types (NPN output type only). On the label
of thru-beam types, the P suffix denotes the emitter, e.g.. EX-P; D denotes the receiver, e.g. EX-D.
Light-
ON
EX-11A(-PN/-R) EX-11EA(-PN/-R) EX-13A(-PN/-R) EX-13EA(-PN/-R) EX-19A(-PN/-R) EX-14A(-PN/-R)
Dark-
ON
EX-11B(-PN/-R) EX-11EB(-PN/-R) EX-13B(-PN/-R) EX-13EB(-PN/-R) EX-19B(-PN -R) EX-14B(-PN/-R)
Sensing range 150mm 500mm 1m
2 to 25mm
*2
(Convergent
point: 10mm)
*2
The sensing range of the convergent reflective type sensor is specified for white non-glossy paper (50×50mm) as the object.
Min. sensing object ø1mm opaque object
(Setting distance between emitter and
receiver: 150mm)
ø2mm opaque object
(Setting distance between emitter and
receiver: 500mm)
ø2mm opaque
object
(Setting distance
between emitter
and receiver: 1m)
ø0.1mm copper
wire
(Setting distance:
10mm)
Hysteresis - 15% or less of
operation
distance
Repeatability (perpen-
dicular to sensing axis)
0.05mm or less 0.1mm or less
Supply voltage 12 to 24V DC±10% Ripple P-P 10% or less
Current consumption Emitter: 10mA or less, Receiver: 10mA or less 13mA or less
Output EX-A(-R), EX-B(-R)
NPN open-collector transistor
• Maximum sink current: 50mA
• Applied voltage: 30V DC or less (between output and 0V)
• Residual voltage: 1V or less (at 50mA sink current) 0.4V
or less (at 16mA sink current)
EX-A-PN, EX-B-PN
PNP open-collector transistor
• Maximum source current: 50mA
• Applied voltage: 30V DC or less (between output and +V)
• Residual voltage: 1V or less (at 50mA source current)
0.4V or less (at 16mA source current)
Short-circuit
protection
Incorporated
Response time 0.5ms or less
Operation indicator Red LED (lights up when the output is ON), located on the receiver for the thru-beam type sensor
Stability indicator Green LED (lights up under stable light received condition or stable dark condition), located on the receiver for the thru-beam
type sensor
Degree of protection IP67
Ambient temperature
-25 to +55°C
*3
(No dew condensation or icing allowed), Storage: -30 to +70°C
*3
-10 to +55°C for the inflection resistant cable type.
Ambient humidity 35 to 85% RH, Storage: 35 to 85% RH
Emitting element Red LED (modulated)
Material Enclosure: Polyethylene terephthalate, Lens: Polyalylate
Cable
0.1mm
2
3-core (thru-beam type emitter: 2-core) cabtyre cable, 2m long
*4
*4
The inflection resistant type has a 0.1mm
2
3-core (thru-beam type emitter: 2-core) inflection resistant cabtyre cable, 2m long.
Weight Emitter, receiver: approx. 20g each Approx. 20g
Accessories Mounting screws: 2 sets Mounting
screws: 1 set