Datasheet
Ultra-slim Photoelectric Sensor EX-10 SERIES Ver.2
318
Selection
Guide
Amplier
Built-in
Power Supply
Built-in
Amplier-
separated
CX-400
CY-100
EX-10
EX-20
EX-30
EX-40
CX-440
EQ-30
EQ-500
MQ-W
RX-LS200
RX
RT-610
FIBER
SENSORS
LASER
SENSORS
PHOTO-
ELECTRIC
SENSORS
MICRO
PHOTO-
ELECTRIC
SENSORS
AREA
SENSORS
LIGHT
CURTAINS /
SAFETY
COMPONENTS
PRESSURE /
FLOW
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
PARTICULAR
USE
SENSORS
SENSOR
OPTIONS
SIMPLE
WIRE-SAVING
UNITS
WIRE-SAVING
SYSTEMS
MEASURE-
MENT
SENSORS
STATIC
ELECTRICITY
PREVENTION
DEVICES
LASER
MARKERS
PLC
HUMAN
MACHINE
INTERFACES
ENERGY
CONSUMPTION
VISUALIZATION
COMPONENTS
FA
COMPONENTS
MACHINE
VISION
SYSTEMS
UV
CURING
SYSTEMS
SPECIFICATIONS
Notes: 1) Where measurement conditions have not been specied precisely, the conditions used were an ambient temperature of +23 °C +73.4 °F.
2) Model Nos. having the sufx “-PN” are PNP output type.
3) The exible cable type (model Nos. having sufx “-R”) has a 0.1 mm
2
3-core (thru-beam type emitter: 2-core) exible cabtyre cable, 2 m 6.562 ft long.
Type
Thru-beam
•
standard type
Front sensing Side sensing Front sensing Side sensing Front sensing Side sensing
Model No.
(Note 2)
Light-ON EX-11A(-PN) EX-11EA(-PN) EX-13A(-PN) EX-13EA(-PN) EX-19A(-PN) EX-19EA(-PN)
Item
Dark-ON EX-11B(-PN) EX-11EB(-PN) EX-13B(-PN) EX-13EB(-PN) EX-19B(-PN) EX-19EB(-PN)
Sensing range 150 mm 5.906 in 500 mm 19.685 in
1 m 3.281 ft
Min. sensing object
ø1 mm ø0.039 in opaque object
(Completely beam interrupted object)
Setting distance
between emitter
and receiver:
150 mm 5.906 in
ø2 mm ø0.079 in opaque object
(Completely beam interrupted object)
Setting distance
between emitter
and receiver:
500 mm 19.685 in
ø2 mm ø0.079 in
opaque object
Completely beam
interrupted object
Setting distance between
emitter and receiver:
1 m 3.281 ft
Hysteresis
–
Repeatability (perpendicular to sensing axis)
0.05 mm 0.002 in or less
Supply voltage 12 to 24 V DC ±10 % Ripple P-P 10 % or less
Current consumption Emitter: 10 mA or less, Receiver: 10 mA or less
Output
<NPN output type>
NPN open-collector transistor
• Maximum sink current: 50 mA
• Applied voltage: 30 V DC or less (between output and 0 V)
• Residual voltage: 2 V or less (at 50 mA sink current)
1 V or less (at 16 mA sink current)
<PNP output type>
PNP open-collector transistor
• Maximum source current: 50 mA
• Applied voltage: 30 V DC or less (between output and +V)
• Residual voltage: 2 V or less (at 50 mA source current)
1 V or less (at 16 mA source current)
Utilization category DC-12 or DC-13
Short-circuit protection Incorporated
Response time 0.5 ms or less
Operation indicator Orange LED (lights up when the output is ON)
Incident beam indicator
–
Stability indicator
Green LED
(lights up under stable light received condition or stable dark condition)
Environmental resistance
Pollution degree 3 (Industrial environment)
Protection IP67 (IEC)
Ambient temperature −25 to +55 °C −13 to +131 °F (No dew condensation or icing allowed), Storage: −30 to +70 °C −22 to +158 °F
Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminance Incandescent light: 3,000 ℓx at the light-receiving face
EMC EN 60947-5-2
Voltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance 10 to 500 Hz frequency, 3 mm 0.118 in amplitude in X, Y and Z directions for two hours each
Shock resistance 500 m/s
2
acceleration (50 G approx.) in X, Y and Z directions for three times each
Emitting element Red LED (Peak emission wavelength: 680 nm 0.027 mil (EX-19E□: 624 nm 0.025 mil), modulated)
Material
Enclosure: Polyethylene terephthalate
Lens: Polyalylate
Cable (Note 5)
0.1 mm
2
3-core (thru-beam type emitter: 2-core) cabtyre cable,
2 m 6.562 ft long
Cable extension Extension up to total 50 m 164 ft is possible with 0.3 mm
2
, or more, cable (thru-beam type: emitter and receiver).
Weight Net weight (each emitter and receiver): 20 g approx., Gross weight: 50 g approx.
Accessories Mounting screws: 1 set










