Owner manual

I Saving and Recalling Data
Saving Readings
• All data Is retained even when the batteries go flat or are changed.
1. The M mark will flash after measurement has
m a?
I M I
/min.
been completed.
Press the Memory/Recall button.
OFF;
ST/
¡38 BP
I*** /min.
JO ___ 11
2. Saving complete.
• Up to 90 sets of readings can be stored In
memory and each Is assigned a number. When
the limit Is reached, any new readings are
recorded over existing readings starting with the
oldest ones. The data numbers will also be
changed.
• It Is not possible to save readings when
measurement has not been carried out
successfully (I.e. when a U Is displayed). As
nothing will be recorded the data number will not
be changed.
• When the U I? mark Is displayed for the pulse
rate, readings can be saved.
19 IJBIHa