Datasheet

Page | 1 / 2

Process Change Notification

Product type

: 6mm Square Thin Type SMD LTSW

Product Part No.

: Refer applicable part no. table.

Change Item

: Change date code display marking from punch method to laser method.

Purpose

: Quality improvement for marking appearance and enhance traceability.

Detail

: Refer diagram below: -

MARKING CHANGE METHOD AND PARTIAL Ag PLATED WILL NOT AFFECT MECHANICAL

AND ELECTRICAL SPECIFICATION

Panasonic

July 2020

To : Distrelec (DISTRELEC 5)

From : Panasonic Industrial Devices Malaysia Sdn. Bhd.

Human Machine Interface Business Group

PAGE 1
Panasonic To : Distrelec (DISTRELEC 5) From : Panasonic Industrial Devices Malaysia Sdn. Bhd. 22nd July 2020 Human Machine Interface Business Group Process Change Notification Product type Product Part No. Change Item Purpose Detail : 6mm Square Thin Type SMD LTSW : Refer applicable part no. table. : Change date code display marking from punch method to laser method. : Quality improvement for marking appearance and enhance traceability.
PAGE 2
Applicable Part No:No. Panasonic Part No. 1. EVQQ2203W 2. EVQQ2D01W 3. EVQQ2D03W 4. EVQQ2S02W 5. EVQQ2W02W Customer Part No. 30121852 30121854 30121855 30121860 30121862 Note: We request to use generic data/family data of representative Part No. if customer required any validation data. Change Schedule: 1st October 2020 onwards Approval: Customer Approval PIDMY HMIBG - Technical Approval Checked Prepared Fahmi Note: Please send back to us after approval before 1st September 2020. Part No. List No. 1.