Operating instructions

20
English
Problem Action
The power switch cannot
be pressed.
Unlock the power switch.
Operating time is short
even after charging.
Apply oil.
When the number of operations
per charge starts to decrease, the
battery is nearing the end of its life.
Makes a loud sound.
Apply oil.
Confirm that the blades are
properly attached.
The shaver makes a high-pitched
sound due to the linear motor
drive. This does not indicate a
problem.
Clean the system outer foil with
the brush.
The odor is getting
stronger.
This can be improved by cleaning
every time after shaving.
You do not get as close a
shave as before.
This can be improved by cleaning
every time after shaving.
Replace the system outer foil and/
or inner blades.
Expected life of system outer foil
and inner blades:
System outer foil:
Approximately 1 year
Inner blades:
Approximately 2 years
Apply oil.
Problem Action
The shaving sensor does
not respond.
The shaving sensor may not
respond when the remaining
battery capacity is low. If this
happens, recharge the shaver.
Depending on the beard
thickness, the shaving sensor
may not react and the driving
sound may not change. This is not
abnormal.
Apply oil. The shaving sensor may
not respond when there is not
enough oil on the blades.
The shaving sensor
responds even though the
shaver is not in contact
with the skin.
Clean the beard trimmings from
the shaver.
When the shaver is extremely
dirty, remove the foil frame and
wash with water.
(See page 15.)
Replace the system outer foil and/
or inner blades.
Expected life of system outer foil
and inner blades:
System outer foil:
Approximately 1 year
Inner blades:
Approximately 2 years
The shaver cannot be
charged with the self-
cleaning recharger.
Gently wipe the main body rear
terminals and the charging
terminals of the self-cleaning
recharger with a cloth or tissue
dampened with water.
ES-TLVK6_ASIA.indb 20 2015/06/08 13:23:06