Operating instructions

16
Replacing the system outer foil and the inner
blades
system outer foil once every year
inner blades once every two years
Removing the outer foil section
Press the foil frame release buttons [
A
3]
and lift the outer foil section [
A
] upwards.
1
2
Attaching the outer foil section
After turning the water inlet surface to the
front, securely attach the outer foil section
[
A

]
to the shaver until it clicks.
Replacing the system outer foil
1. Press the system outer foil release
buttons [
A
] and pull down the
system outer foil.
2. Align the front side of the foil
frame with the system outer foil
mark ( ) and insert them rmly
together.
The system outer foil cannot be
reversely attached.
Always insert the system outer foil to the
foil frame when attaching to the shaver.
12
Troubleshooting
Problem Action
Trimmed hairs y
all over.
This can be improved by cleaning
every time after shaving.
Clean the blades with the brush.
System outer foil
gets hot.
Replace the system outer foil if it is
damaged or deformed.
(See page 16)
The blades do not
dry.
The blades may not dry quickly due
to temperature conditions.
The blades can be dried more easily
by removing for drying.
The odor is getting
stronger.
This can be improved by cleaning
every time after shaving.
Replacing the inner blades
1. Remove the inner blades [
A
]
one at a time.
Do not touch the edges (metal parts) of
the inner blades to prevent injury to your
hand.
2. Insert the inner blades one at a
time until they click.
12
PB013084 - ES-SL33_(01)GB_�����_05-13-16.indd 16 2016/5/17 9:01:13