Operating instructions

14
Using the shaver
1 Press the power
switch [
A
6
].
2 Hold the shaver as
illustrated above and
shave.
Start shaving by applying gentle pressure to your face.
Stretch your skin with your free hand and move the shaver
back and forth in the direction of your beard. You may gently
increase the amount of pressure as your skin becomes
accustomed to this shaver. Applying excessive pressure
does not provide a closer shave.
You can also use a pen grip
to hold the shaver.
A full charge will supply enough power for approx. 7 shaves
based on one 3-minute dry-shave use per day. (This will
differ depending on usage.)
Notes
The appliance may not operate in an ambient temperature
lower than approximately 0 °C.
Before shaving, check that the cleaning shutter is closed.
Do not place your ngers on the power switch while using
the shaver. This may cause the shaver to turn off.
Do not use shaving creams or face cleansers containing
scrubbing compounds as these may cause the outer foil to
clog.
Using the trimmer
Slide the trimmer handle up to open
the trimmer. Place the trimmer at a
right angle (90 degree) to your skin
and move downwards to trim your
sideburns.
Cleaning the shaver
1. Remove the shaver from the
AC adaptor.
2. Apply some hand soap and
some water to the outer foil
[
A
1].
Close the cleaning shutter
[
A
4
]
.
3. Turn the shaver on.
PB013084 - ES-SL33_(01)GB_�����_05-13-16.indd 14 2016/5/17 9:01:10