Operating Instructions

8
Čišćenje
Održavanje
Čišćenje aparata za brijanje
Zamjena sustava mrežica za brijanje i unutrašnjih oštrica
Čišćenje četkicom
1. Uklonite aparat za brijanje s prilagodnika za izmjeničnu
struju.
2. Dodajte malo sapuna za ruke i vode
na vanjsku mrežicu.
3. Uključite aparat za brijanje.
4. Nakon 10 – 20 sekundi isključite
aparat za brijanje.
5. Uklonite nastavak s vanjskim
mrežicama [ ].
6. Tekućom vodom očistite aparat
za brijanje i nastavak s vanjskim
mrežicama [ ].
7. Obrišite preostale kapljice vode
suhom tkaninom.
8. U potpunosti osušite nastavak s
vanjskim mrežicama [ ] i aparat za
brijanje.
9. Pričvrstite nastavak s mrežicama za
brijanje [ ] na aparat za brijanje.
Očistite sustav mrežica za brijanje
[ ], kućište aparata za brijanje
i šišač [ ] dugom četkicom.
Očistite unutrašnje oštrice [ ]
kratkom četkicom tako da je
pomičete u smjeru (A).
• Nemojte pomicati kratku četkicu
u smjeru (B) jer bi to moglo
oštetiti unutrašnje oštrice [ ] i
utjecati na njihovu oštrinu.
• Nemojte koristiti kratku četkicu
kako biste očistili vanjske
mrežice.
sustav mrežica za brijanje jednom godišnje
unutrašnje oštrice jednom svake dvije godine
Uklanjanje nastavka s vanjskim mrežicama
Pritisnite gumbe za otpuštanje okvira za mrežicu za brijanje
[ ] i podignite nastavak s vanjskim
mrežicama [ ] prema gore.
Spajanje nastavka s vanjskim mrežicama
Čvrsto pričvrstite nastavak s vanjskim
mrežicama [ ] na aparat za brijanje dok ne
začujete zvuk klika.
8
Clean
Cleaning the shaver
1. Remove the shaver from the AC adaptor.
2. Apply some hand soap and some water to the outer foil.
3. Turn the shaver on.
3
4. Turn the shaver off after 10‑20 seconds.
5. Remove the outer foil section [B].
5
6. Clean the shaver and the outer foil
section [B] with running water.
7. Wipe off any drops of water with a
dry cloth.
8. Dry the outer foil section [B] and the
shaver completely.
9. Attach the outer foil section [B] to
the shaver.
Cleaning with the brush
Clean the system outer foil
[B2], the shaver body and the
trimmer [D:] using the long
brush.
Clean the inner blades [C] using
the short brush by moving it in
direction (A).
•Do not move the short brush in
direction (B) as it will damage
the inner blades [C] and affect
their sharpness.
•Do not use the short brush to
clean the outer foils.
(A)
(B)
Maintenance
Replacing the system outer foil and the inner blades
system outer foil once every year
inner blades once every two years
Removing the outer foil section
Press the foil frame release buttons [D4] and lift the outer
foil section [B] upwards.
Attaching the outer foil section
Securely attach the outer foil section [B] to
the shaver until it clicks.
1 2
ES-RT53_33_EU.indb 8 2012/04/27 16:24:50
8
Clean
Cleaning the shaver
1. Remove the shaver from the AC adaptor.
2. Apply some hand soap and some water to the outer foil.
3. Turn the shaver on.
3
4. Turn the shaver off after 10‑20 seconds.
5. Remove the outer foil section [B].
5
6. Clean the shaver and the outer foil
section [B] with running water.
7. Wipe off any drops of water with a
dry cloth.
8. Dry the outer foil section [B] and the
shaver completely.
9. Attach the outer foil section [B] to
the shaver.
Cleaning with the brush
Clean the system outer foil
[B2], the shaver body and the
trimmer [D:] using the long
brush.
Clean the inner blades [C] using
the short brush by moving it in
direction (A).
•Do not move the short brush in
direction (B) as it will damage
the inner blades [C] and affect
their sharpness.
•Do not use the short brush to
clean the outer foils.
(A)
(B)
Maintenance
Replacing the system outer foil and the inner blades
system outer foil once every year
inner blades once every two years
Removing the outer foil section
Press the foil frame release buttons [D4] and lift the outer
foil section [B] upwards.
Attaching the outer foil section
Securely attach the outer foil section [B] to
the shaver until it clicks.
1 2
ES-RT53_33_EU.indb 8 2012/04/27 16:24:50
B
B
B
B
8
Clean
Cleaning the shaver
1. Remove the shaver from the AC adaptor.
2. Apply some hand soap and some water to the outer foil.
3. Turn the shaver on.
3
4. Turn the shaver off after 10‑20 seconds.
5. Remove the outer foil section [B].
5
6. Clean the shaver and the outer foil
section [B] with running water.
7. Wipe off any drops of water with a
dry cloth.
8. Dry the outer foil section [B] and the
shaver completely.
9. Attach the outer foil section [B] to
the shaver.
Cleaning with the brush
Clean the system outer foil
[B2], the shaver body and the
trimmer [D:] using the long
brush.
Clean the inner blades [C] using
the short brush by moving it in
direction (A).
•Do not move the short brush in
direction (B) as it will damage
the inner blades [C] and affect
their sharpness.
•Do not use the short brush to
clean the outer foils.
(A)
(B)
Maintenance
Replacing the system outer foil and the inner blades
system outer foil once every year
inner blades once every two years
Removing the outer foil section
Press the foil frame release buttons [D4] and lift the outer
foil section [B] upwards.
Attaching the outer foil section
Securely attach the outer foil section [B] to
the shaver until it clicks.
1 2
ES-RT53_33_EU.indb 8 2012/04/27 16:24:50
8
Clean
Cleaning the shaver
1. Remove the shaver from the AC adaptor.
2. Apply some hand soap and some water to the outer foil.
3. Turn the shaver on.
3
4. Turn the shaver off after 10‑20 seconds.
5. Remove the outer foil section [B].
5
6. Clean the shaver and the outer foil
section [B] with running water.
7. Wipe off any drops of water with a
dry cloth.
8. Dry the outer foil section [B] and the
shaver completely.
9. Attach the outer foil section [B] to
the shaver.
Cleaning with the brush
Clean the system outer foil
[B2], the shaver body and the
trimmer [D:] using the long
brush.
Clean the inner blades [C] using
the short brush by moving it in
direction (A).
•Do not move the short brush in
direction (B) as it will damage
the inner blades [C] and affect
their sharpness.
•Do not use the short brush to
clean the outer foils.
(A)
(B)
Maintenance
Replacing the system outer foil and the inner blades
system outer foil once every year
inner blades once every two years
Removing the outer foil section
Press the foil frame release buttons [D4] and lift the outer
foil section [B] upwards.
Attaching the outer foil section
Securely attach the outer foil section [B] to
the shaver until it clicks.
1 2
ES-RT53_33_EU.indb 8 2012/04/27 16:24:50
B
2
D
10
C
C
D
4
B
B