Operating instructions

13
Problem Action
The driving sound
changes while shaving.
The shaving sensor is operating.
The sound changes depending on
the beard thickness.
Makes a loud sound.
Apply oil.
The blades will not move
smoothly when there is no oil on
the blades, requiring more power.
The shaver makes a high‑pitched
sound due to the linear motor drive.
This does not indicate a problem.
Conrm that the blades are
properly attached.
Clean the system outer foil with
the brush.
The odor is getting stronger.
This can be improved by cleaning
every time after shaving.
Shavings y out in all
directions.
This can be improved by cleaning
every time after shaving.
Clean the inner blades with the
brush when shavings are
adhering to the inner blades.
System outer foil gets hot.
Apply oil.
Replace the system outer foil if it
is damaged or deformed.
(See page 10.)
Problem Action
You do not get as close a
shave as before.
This can be improved by cleaning
every time after shaving.
Replace the system outer foil and/
or inner blades.
Expected life of system outer foil
and inner blades:
System outer foil:
Approximately 1 year
Inner blades:
Approximately 2 years
Apply oil.
Battery life
The life of the battery is 3 years. The battery in this shaver is not
intended to be replaced by consumers. Have the battery replaced
by an authorized service center.