Operating Instructions (Household) Rechargeable Shaver Model No. ES‑LV6Q Contents Safety precautions...........2 FAQ..........................................11 Intended use.............................5 Troubleshooting.....................12 Parts identification...................6 Battery life...............................13 Preparation...............................6 Removing the built-in rechargeable battery..............14 How to use................................7 Cleaning the shaver.......
Safety precautions To reduce the risk of injury, loss of life, electric shock, fire, and damage to property, always observe the following safety precautions. Explanation of symbols The following symbols are used to classify and describe the level of hazard, injury, and property damage caused when the denotation is disregarded and improper use is performed. WARNING ►This ► product This shaver has a built-in rechargeable battery.
WARNING Do not immerse the AC adaptor in water or wash with water. Do not place the AC adaptor over or near water filled sink or bathtub. Never use the appliance if the AC adaptor is damaged or if the power plug fits loosely in a household outlet. Do not damage, modify, or forcibly bend, pull, or twist the cord. Also, do not place anything heavy on or pinch the cord. - Doing so may cause electric shock or fire due to a short circuit.
CAUTION ►Protecting ► the skin Do not use excessive pressure to apply the system outer foil to your lip or other part of your face. Do not apply the system outer foil directly to blemishes or injured skin. Do not touch the blade section (metallic section) of the inner blade. - Doing so may cause injury to skin or hand. Do not forcefully press the system outer foil. Also, do not touch the system outer foil with fingers or nails when in use.
Handling of the removed battery when disposing DANGER ••The rechargeable battery is exclusively for use with this appliance. Do not use the battery with other products. ••Do not charge the battery after it has been removed from the product. ••Do not throw into fire or apply heat. ••Do not hit, disassemble, modify, or puncture with a nail. ••Do not let the positive and negative terminals of the battery get in contact with each other through metallic objects.
•• If you clean the shaver with water, do not use salt water or hot water. Do not soak the shaver in water for a long period of time. •• The following symbol indicates that a specific detachable power supply unit is required for connecting the electrical appliance to the supply mains. The type reference of power supply unit is marked near the symbol. Parts identification Back a b c d e b f g 6 g.
3 Disconnect the adaptor after charging is completed. Note You cannot operate the shaver while charging. While charging glows. The number of the battery capacity lamp will increase as charging progresses. After charging is completed All the battery capacity lamp and will glow and then turn off after 5 seconds.
Tips for better shaving When the battery capacity is low Apply the whole system outer foil perpendicularly against the skin and shave by slowly gliding the shaver over the face against the grain of the beard. •• The beard under the chin and around the throat can be shaved better by stretching the skin so the beard will stand. •• To prevent damaging the system outer foil, do not shave with only a part of the system outer foil. 2 Press when finished. While using “10%” appears and “ ” blinks.
►Using ► the trimmer Cleaning the shaver 1. Slide the trimmer handle up to the “ ” position so that the trimmer stands upright. 2. Press and use. FREE LOCK We recommend cleaning the shaver after each use. Cleaning with water •• Turn the shaver off and disconnect the AC adaptor. Press and hold the top knob (a) and slide the trimmer handle down to lower the trimmer. Apply some hand soap and some water to the system outer foil.
4 5 Dry the outer foil section, the shaver, and the trimmer completely. •• Allow the shaver to dry in the shade, avoid direct sunlight. Lubricate the shaver. It will keep the movement of the blade smooth and maintain a comfort shave. 1. Apply one drop of oil to each of the system outer foils. 2. Raise the trimmer and apply a drop of oil. 3. Switch the shaver on, and run it for approximately five seconds. 4. Switch off the shaver, and wipe off any excess oil from the system outer foil with a soft cloth.
►Removing ► the outer foil section Press the foil frame release buttons and lift the outer foil section upwards. ►Attaching ► the outer foil section After turning the foil frame mark ( ) to the front, securely attach the outer foil section to the shaver until it clicks. ►Replacing ► the system outer foil 1. Press the system outer foil release buttons and pull down the system outer foil. •• Do not press the system outer foil release buttons with excessive force.
Troubleshooting Problem Perform the following actions. If the problems still cannot be solved, contact the store where you purchased the unit or a service center authorized by Panasonic for repair. Problem The power switch does not turn ON. Action The appliance may not unlock depending on usage conditions. Place the appliance on the desk, then pick it up again. If it still does not operate, press and hold the power switch for more than 2 seconds to forcibly unlock the appliance.
Problem The driving sound changes while shaving. Action The shaving sensor is operating. The sound changes depending on the beard thickness. Apply oil. The blades will not move smoothly when there is no oil on the blades, requiring more power. Makes a loud sound. Problem This can be improved by cleaning every time after shaving. You do not get as close a shave as before. The shaver makes a high-pitched sound due to the linear motor drive. This does not indicate a problem.
Removing the built-in rechargeable battery Remove the built-in rechargeable battery before disposing of the shaver. Please make sure that the battery is disposed of at an officially designated location if there is one. This figure must only be used when disposing of the shaver, and must not be used to repair it. If you dismantle the shaver yourself, it will no longer be waterproof, which may cause it to malfunction. •• Remove the shaver from the AC adaptor.
MEMO 15
Panasonic Corporation http://www.panasonic.
