Operating Instructions

19
TR RO H SK CZ PL FIN S N P DK E NL I F D GB
Problem Action
The shaving sensor
responds even though
the shaver is not in
contact with the skin.
Clean the beard trimmings from
the shaver.
When the shaver is extremely
dirty, remove the foil frame and
wash with water.
(See page 15.)
Replace the system outer foil
and/or inner blades.
Expected life of system outer
foil and inner blades:
System outer foil:
Approximately 1 year
Inner blades:
Approximately 2 years
Operating time is short
even after charging.
Apply oil.
This can be improved by cleaning
every time after shaving.
When the number of operations
per charge starts to decrease,
the battery is nearing the end of
its life.
Problem Action
Shaver does not operate
even after charging.
Use the appliance in an
ambient temperature
approximately 5 °C or higher.
The battery has reached the
end of its life.
The shaver will not operate with
the AC adaptor connected.
Please use the shaver after it has

AC adaptor disconnected.
The driving sound
changes while shaving.
The shaving sensor is operating.
The sound changes depending
on the beard thickness.
Makes a loud sound.
Apply oil.
The blades will not move
smoothly when there is no oil on
the blades, requiring more power.
The shaver makes a high‑
pitched sound due to the linear
motor drive. This does not
indicate a problem.

properly attached.
Clean the system outer foil with
the brush.
The odor is getting
stronger.
This can be improved by cleaning
every time after shaving.