Operating Instructions

12

A
1 Protective cap
2 System outer foil
3 Foil frame
4 Smooth rollers
• They help to glide over
the skin more easily.
5 Foil frame release
buttons
6 Power switch
7 Lamp display
a. Used time lamp
b.
Battery capacity lamp
c. Shaving sensor lamp
(
)
d. Clean lamp (
)
e.
Switch lock lamp ( )
f. Foil/blade check
lamp (
)
g. Charge status lamp
(
)
8 Appliance socket
9 Outer foil section
: System outer foil
release buttons
; Inner blades
< Trimmer
= Trimmer handle
B AC adaptor (RE7‑87)
> Adaptor
? Power plug
@ Cord
A Appliance plug
Accessories
C Travel case
D Cleaning brush
E Oil
F Operating Instructions
G Guarantee Card
Preparation
Charging the shaver
• Turn the shaver off.
• Wipe off any water droplets on the appliance socket.
1
Insert the appliance plug
[BA] into the shaver�
2
Plug the adaptor [B>] into a
household outlet�
• Check that the charge status lamp
(
) is glowing.
• Charging is completed after
approx. 1 hour.
2
1
3
Disconnect the adaptor after charging is completed�
Note
You cannot operate the shaver while charging.
While charging After charging is completed
glows.
The number of the battery
capacity lamp will increase
as charging progresses.
All the battery capacity lamp
and
will glow and then
turn off after 5 seconds.